SONY MZ-RH910_ver_1.0 维修电路图.pdf

SERVICE MANUAL PORTABLE MD RECORDER US Model Canadian Model AEP Model UK Model E Model Australian Model Tourist Model SPECIFICATIONS MZ-RH910 Ver. 1.0 2005.03 Model Name Using Similar MechanismNEW MD Mechanism TypeMT-MZNH900-181J Optical Pick-up NameABX-UJ 9-879-561-01 2005C05-1 2005.03 Sony Corporation Personal Audio Group Published by Sony Engineering Corporation Continued on next page US and foreign patents licensed from Dolby Laboratories. SonicStage is trademark or registered trademark of Sony Corporation. MD Simple Burner, OpenMG, “MagicGate”, “MagicGate Memory Stick”, “Memory Stick”, Hi-MD, Net MD, ATRAC, ATRAC3, ATRAC3plus and their logos are trademarks of Sony Corporation. Microsoft, Windows, Windows NT and Windows Media are trademarks or registered trademarks of Microsoft Corporation in the United States and /or other countries. IBM and PC/AT are registered trademarks of International Business Machines Corporation. Macintosh is a trademark of Apple Computer, Inc. in the United States and/ or other countries. Pentium is a trademark or registered trademark of Intel Corporation. All other trademarks and registered trademarks are trademarks or registered trademarks of their respective holders. and marks are omitted in this manual. CD and music-related data from Gracenote, Inc., copyright 2000- 2004 Gracenote. Gracenote CDDB Client Software, copyright 2000- 2004 Gracenote. This product and service may practice one or more of the following U.S. Patents: #5,987,525; #6,061,680; #6,154,773, #6,161,132, #6,230,192, #6,230,207, #6,240,459, #6,330,593, and other patents issued or pending. Services supplied and/or device manufactured under license for following Open Globe, Inc. United States Patent 6,304,523. Gracenote is a registered trademarks of Gracenote. The Gracenote logo and logotype, and the “Powered by Gracenote” logo are trademarks of Gracenote. Program 2001, 2002, 2003, 2004, 2005 Sony Corporation Documentation 2005 Sony Corporation Audio playing system MiniDisc digital audio system Laser diode properties Material: GaAlAs Wavelength: = 790 nm Emission duration: continuous Laser output: less than 44.6 W (This output is the value measured at a distance of 200 mm from the lens surface on the optical pick-up block with 7 mm aperture.) 收音机爱好者资料库 Ra d i o Fa n s .CN For other Service and User Manuals, go to www.ManualD 2 MZ-RH910 Recording and playback time Revolutions 350 rpm to 3,000 rpm (CLV) Error correction Hi-MD: LDC (Long Distance Code)/BIS (Burst Indicator Subcode) MD: ACIRC (Advanced Cross Interleave Reed Solomon Code) Sampling frequency 44.1 kHz Sampling rate converter Optical (digital) input: 32 kHz/44.1 kHz/ 48 kHz Audio formats supported by this recorder Recording: Linear PCM (44.1 kHz/16 bit) ATRAC3plus (Adaptive TRansform Acoustic Coding 3 plus) (Hi-SP/Hi-LP) Playback: Linear PCM ATRAC3plus ATRAC3 ATRAC MP3 (MPEG-1 Audio Layer-3/Sampling frequency 44.1 kHz/Bit rate 32 - 320 kbps (constant/variable bit rate) Modulation system Hi-MD: 1-7RLL (Run Length Limited)/PRML (Partial Response Maximum Likelihood) MD: EFM (Eight to Fourteen Modulation) Frequency response 20 to 20,000 Hz 3 dB Inputs1) MIC: stereo mini-jack (minimum input level 0.13 mV) Line in: stereo mini-jack for analog input (minimum input level 49 mV) optical (digital) mini-jack for optical (digital) input Outputs i: stereo mini-jack (dedicated remote control jack) 1)The LINE IN (OPT) jack is used to connect either a digital (optical) cable or a line (analog) cable. List of the recording time for each disc When using a disc in Hi-MD mode When recording on the recorder Recording time1) 1)Approximate time Recording mode on the recorder Codec/ Bit rate 1GB Hi-MD disc 80-minute standard disc 74-minute standard disc 60-minute standard disc PCMLinear PCM/ 1.4Mbps 1 hour and 34 minutes 28 minutes26 minutes21 minutes Hi-SPATRAC3plus/ 256kbps 7 hours and 55 minutes 2 hours and 20 minutes 2 hours and 10 minutes 1 hour and 40 minutes Hi-LPATRAC3plus/ 64kbps 34 hours10 hours and 10 minutes 9 hours and 20 minutes 7 hours and 40 minutes When transferring from the computer Recording time1)2) 2)When transferring 4-minute tracks Codec/Bit rate1GB Hi-MD disc 80-minute standard disc 74-minute standard disc 60-minute standard disc Linear PCM/1.4Mbps1 hour and 34 minutes 28 minutes26 minutes21 minutes ATRAC3plus/256kbps7 hours and 55 minutes 2 hours and 20 minutes 2 hours and 10 minutes 1 hour and 40 minutes ATRAC3plus/64kbps34 hours10 hours and 10 minutes 9 hours and 20 minutes 7 hours and 40 minutes ATRAC3plus/ 48 kbps45 hours13 hours and 30 minutes 12 hours and 30 minutes 10 hours ATRAC3/132kbps16 hours and 30 minutes 4 hours and 50 minutes 4 hours and 30 minutes 3 hours and 40 minutes ATRAC3/105kbps20 hours and 40 minutes 6 hours and 10 minutes 5 hours and 40 minutes 4 hours and 40 minutes ATRAC3/66kbps32 hours and 40 minutes 9 hours and 50 minutes 9 hours7 hours and 20 minutes MP3/128kbps17 hours5 hours4 hours and 30 minutes 3 hours and 30 minutes When using a disc in MD mode You cannot record in MD mode on this recorder. When transferring from the computer Recording time1)2) 1)Approximate time 2)When transferring 4-minute tracks Codec/Bit rate80-minute standard disc 74-minute standard disc 60-minute standard disc ATRAC(stereo)/292kbps80 minutes74 minutes60 minutes ATRAC3/132, 105kbps2 hours and 40 minutes 2 hours and 28 minutes 2 hours ATRAC3/66kbps5 hours and 20 minutes 4 hours and 56 minutes 4 hours Maximum output (DC) Headphones: 2.8 mW + 2.8 mW (16 ) (European models) 5 mW + 5 mW (16 ) (Other models) Power requirements Sony AC Power Adaptor connected at the DC IN 3V jack: 120 V AC, 60 Hz (Models for USA, Canada, Mexico and Taiwan) 240 V AC, 50 Hz (Model for Australia) 220 V AC, 50 Hz (Models for China and Argentine) 100 - 240 V AC, 50/60 Hz (Other models) The recorder: Nickel metal hydride rechargeable battery NH-10WM 1.2V 900 mAh (MIN) Ni-MH LR6 (size AA) alkaline battery AC power adaptor DC 3V Operating temperature +5C (+41F) to +35C (+95F) Battery operation time2) Dimensions Approx. 80.2 20.7 84.3 mm (w/h/d) (31/4 27/32 33/8 in.) (excluding projecting parts and controls) Mass Approx. 112 g (4.0 oz) (the recorder only) Approx. 138 g (4.9 oz) (including the rechargeable battery) Supplied accessories AC power adaptor Remote control (except US and Canadian models) Earphones Dedicated USB cable NH-10WM Nickel metal hybride rechargeable battery Battery carrying case Dry battery case Optical cable (except US and Canadian models) Clamp filters (small-size) CD-ROM (SonicStage/MD Simple Burner)* Carrying poach * Do not play a CD-ROM on an audio CD player. 2)Measured in accordance with JEITA. Design and specifications are subject to change without notice. When playing continuously in Hi-MD mode (Unit: approx.hours)(JEITA) When playing continuously in MD mode (Unit: approx.hours)(JEITA) Battery life When recording continuously in Hi-MD mode (Unit: approx.hours)(JEITA1) Disc typeBatteriesLinear PCMHi-SPHi-LP 1GB Hi-MD discNH-10WM2)45.56.5 LR63)233.5 NH-10WM + LR66.5911 60/74/80-minute standard disc NH-10WM3.55.56.5 LR646.57.5 NH-10WM + LR681315 1)Measured in accordance with the JEITA (Japan Electronics and Information Technology Industries Association) standard. 2)When using a 100% fully charged nickel metal hydride rechargeable battery 3)When using a Sony LR6 (size AA) alkaline dry battery (produced in Japan) Disc typeBatteriesLinear PCM Hi-SPHi-LPMP31) 1)Tracks transferred at 128 kbps 1GB Hi-MD discNH-10WM6.59.51110 LR610.515.51816.5 NH-10WM + LR6203034.531.5 60/74/80-minute standard disc NH-10WM5.591110 LR68.5151816.5 NH-10WM + LR616.528.534.531.5 Disc typeBatteriesSPLP2LP4 60/74/80-minute standard disc NH-10WM101112 LR617.52021 NH-10WM + LR6333739.5 收音机爱好者资料库 Ra d i o Fa n s .CN 3 MZ-RH910 Notes on chip component replacement Never reuse a disconnected chip component. Notice that the minus side of a tantalum capacitor may be damaged by heat. Flexible Circuit Board Repairing Keep the temperature of the soldering iron around 270 C during repairing. Do not touch the soldering iron on the same conductor of the circuit board (within 3 times). Be careful not to apply force on the conductor when soldering or unsoldering. CAUTION Use of controls or adjustments or performance of procedures other than those specified herein may result in hazardous radiation exposure. SAFETY-RELATED COMPONENT WARNING! COMPONENTS IDENTIFIED BY MARK 0 OR DOTTED LINE WITH MARK 0 ON THE SCHEMATIC DIAGRAMS AND IN THE PARTS LIST ARE CRITICAL TO SAFE OPERATION. REPLACE THESE COMPONENTS WITH SONY PARTS WHOSE PART NUMBERS APPEAR AS SHOWN IN THIS MANUAL OR IN SUPPLEMENTS PUBLISHED BY SONY. ATTENTION AU COMPOSANT AYANT RAPPORT LA SCURIT! LES COMPOSANTS IDENTIFIS PAR UNE MARQUE 0 SUR LES DIAGRAMMES SCHMATIQUES ET LA LISTE DES PICES SONT CRITIQUES POUR LA SCURIT DE FONCTIONNEMENT. NE REMPLACER CES COM- POSANTS QUE PAR DES PICES SONY DONT LES NUMROS SONT DONNS DANS CE MANUEL OU DANS LES SUPPLMENTS PUBLIS PAR SONY. On power sources For use in your house: Use the AC power adaptor supplied with this recorder. Do not use any other AC power adaptor since it may cause the recorder to malfunction. Polarity of the plug TABLE OF CONTENTS 1.SERVICING NOTES.4 2.GENERAL.5 3.DISASSEMBLY 3-1.Disassembly Flow .6 3-2.Case (Lower) Block.6 3-3.MAIN Board.7 3-4.Panel (Upper) Section .7 3-5.Mechanism Deck (MT-MZNH900-181J).8 3-6.Battery Case Block .8 3-7.Gear (BSA), Gear (SB) .9 3-8.OP Service Assy .9 3-9.DC Motor SSM18D/C-NP (Spindle) (M701), DC Motor (Sled) (M702), DC Motor Unit (Over Write Head Up/Down) (M703) . 10 3-10. Holder Assy . 10 3-11. Position of Ferrite Core . 11 4.TEST MODE. 12 5.ELECTRICAL ADJUSTMENTS. 16 6.DIAGRAMS 6-1.Block Diagram MD SERVO Section . 21 6-2.Block Diagram AUDIO Section . 22 6-3.Block Diagram POWER SUPPLY Section . 23 6-4.Schematic Diagram MAIN Board (1/9) . 25 6-5.Schematic Diagram MAIN Board (2/9) . 26 6-6.Schematic Diagram MAIN Board (3/9) . 27 6-7.Schematic Diagram MAIN Board (4/9) . 28 6-8.Schematic Diagram MAIN Board (5/9) . 29 6-9.Schematic Diagram MAIN Board (6/9) . 30 6-10. Schematic Diagram MAIN Board (7/9) . 31 6-11. Schematic Diagram MAIN Board (8/9) . 32 6-12. Schematic Diagram MAIN Board (9/9) . 33 6-13. Printed Wiring Board MAIN Board (Component Side) . 34 6-14. Printed Wiring Board MAIN Board (Conductor Side) . 35 7.EXPLODED VIEWS 7-1.Case (Lower) Section . 48 7-2.Panel (Upper) Section . 49 7-3.Chassis Section. 50 7-4.Mechanism Deck Section (MT-MZNH900-181J). 51 8.ELECTRICAL PARTS LIST. 52 收音机爱好者资料库 Ra d i o Fa n s .CN 4 MZ-RH910 SECTION 1 SERVICING NOTES The laser diode in the optical pick-up block may suffer electrostatic break-down because of the potential difference generated by the charged electrostatic load, etc. on clothing and the human body. During repair, pay attention to electrostatic break-down and also use the procedure in the printed matter which is included in the repair parts. The flexible board is easily damaged and should be handled with care. NOTES ON LASER DIODE EMISSION CHECK The laser beam on this model is concentrated so as to be focused on the disc reflective surface by the objective lens in the optical pick- up block. Therefore, when checking the laser diode emission, observe from more than 30 cm away from the objective lens. NOTES ON HANDLING THE OPTICAL PICK-UP BLOCK OR BASE UNIT OPERATION CHECK WHEN THE MAIN BOARD IS REMOVED In making an operation check with the MAIN board removed from the set, short the SL894 of the MAIN board with the solder before starting the operation check. Note: Be sure to remove the solder used for shortcircuit after the repaire completed. MAIN BOARD (Conductor Side) SL894 UNLEADED SOLDER Boards requiring use of unleaded solder are printed with the lead- free mark (LF) indicating the solder contains no lead. (Caution: Some printed circuit boards may not come printed with the lead free mark due to their particular size) : LEAD FREE MARK Unleaded solder has the following characteristics. Unleaded solder melts at a temperature about 40 C higher than ordinary solder. Ordinary soldering irons can be used but the iron tip has to be applied to the solder joint for a slightly longer time. Soldering irons using a temperature regulator should be set to about 350 C. Caution: The printed pattern (copper foil) may peel away if the heated tip is applied for too long, so be careful! Strong viscosity Unleaded solder is more viscou-s (sticky, less prone to flow) than ordinary solder so use caution not to let solder bridges occur such as on IC pins, etc. Usable with ordinary solder It is best to use only unleaded solder but unleaded solder may also be added to ordinary solder. Providing the required system environment The following system environment is required in order to use the SonicStage Ver. 3.0/MD Simple Burner Ver. 2.0 software for the MD Walkman. This software is not supported by the following environments: OSs other than the indicated above Personally constructed PCs or operating systems An environment that is an upgrade of the original manufacturer-installed operating system Multi-boot environment Multi-monitor environment Macintosh We do not ensure trouble-free operation on all computers that satisfy the system requirements. The NTFS format of Windows XP/Windows 2000 Professional can be used only with the standard (factory) settings. For Windows 2000 Professional users, install Service Pack 3 or later version before using the software. We do not ensure trouble-free operation of the system suspend, sleep, or hibernation function on all computers. System requirements ComputerIBM PC/AT or Compatible CPU: Pentium III 45