McIntosh Knob Info.pdf

KNOB INFORMATION McIntosh laboratory inc. 2 chambers street binghamton, new york KNOBS Model Gll C 8 C8-S c 11 G 20 C 20 C 20 Serial Part Number Number Control Function Figure All 090-067 Selector, comp., baas, treble volume 5 090-097 Phono 2 load 12 All 090-068 Rumble filter, aural comp. 6 090-067 Selector, baas, treble, volume 5 090-012 Phono 2 load 16 All 090-068 Rumble filter, aural comp. 6 090-067 Selector, volume 5 090-089 Treble, balance 5 090-088 Baas, mode selector 7 090-012 Phono 2 load 16 100N1 if the bottom row of knobs are: 15/16 Dia, with a dot indicator use 090-066. (Fig, 29) 15/16 Dia. with a slot indicator use 090-081. (Fig. 28) 1 1/8 Dia. for a flatted shaft use 043-860. (Fig. 27) 1 1/8 Dia. for a knurled shaft use 090-086. (Fig. 27) 6. 043-862 for earlier units with a buffed front surface. 04-3-4-02 for later units with a machined front surface. 7. 04-3-859 for earlier units with a buffed front surface. 043-428 for later units with a machined front surface. 8. 090-012 for earlier units with a flatted shaft. 090-013 for later units with a knurled shaft. 9. 090-008 for earlier units with a knurled shaft. 043-625 for later units with a flatted shaft. 10. 043-864 if shaft flat is toward the unit top with control in the center position (earlier units). 043-4-28 if shaft flat is toward the unit bottom with control in center position (later units). 11. 090-014 for earlier units (Fig. 2) 090-016 for later units (Fig. 5) 12. 090-095 for earlier units (Fig. 13) 090-017 for later units (Fig. 6) 20C05136S-M8271