Drake_SW8_user.pdf

Printed in the U. S. A. Copyright 1997 R. L. Drake Co.P/N: 3851295F-4-1997 TONE H VOLUME TUNING SW8 World Band ? Shortwave Receiver BAND AGC S AM SYNC METER TIMER? ? +60? +40? +20? 9? 7? 5? 3? 1 KHz? ? SW M E M? ? SSB 5 BW 6 SCAN? MEM LAMP 9 STORE? VFO SKIP CLEAR? BEEP TIMER? CLOCK AGC 8 AM? SYNC 4 DEL 0 ATT 7 BCB 1 AIR 2 SW 3 F L POWER? push 6.0 Owners Manual is a registered trademark of the R. L. Drake Company SW8 World Band Shortwave Receiver with Selectable Sideband Synchronous Detector LSB Downloaded by? Amateur Radio Directory? ? www.hamdirectory.info Date: April 26/1996 Ref. No. 963732 Signature: _ Name: P. Kraowski Dipl.-Ing. Declaration of Conformity We, Manufacturer/Importer (Full address) R. L. Drake Company 230 Industrial Drive Franklin, Ohio 45005 United States of America declare that the product (description of the apparatus, system, installation to which it refers) SW8 World Band Shortwave Receiver 1295 is in conformity with (reference to the specifications under which conformity is declared) in accordance with 89/336/EEC-EMC Directive Disturbances in supply systems caused by household appliances and similar electrical equipment Harmonics Disturbances in supply systems caused by household appliances and similar electrical equipment Voltage fluctuations Generic emission standard Part 1: Residual, commercial and light industry Generic immunity standard Part 1: Residual, commercial and light industry Generic emission standard Part 2: Industrial environment Generic immunity standard Part 2: Industrial environment Signalling on low-voltage electrical Installations in the frequency range of 3kHz to 148.5kHz Part 1: General requirements, frequency bands and electromagnetic disturbances Immunity requirements for household appliances tools and similar apparatus EN 55011 EN 55013 EN 55014 EN 55015 EN 55020 EN 55022 DIN V VDE 0855 part 10 part 12 CE marking EN 60065 EN 60555-2 EN 60555-3 EN 50081-1 EN 50082-1 EN 50081-2 EN 50082-2 EN 50065-1 EN55104 Limits and methods of measurement of radio disturbance characteristics of industrial, scientific and medical (ISM) high frequency equipment Limits and methods of measurement of radio disturbance characteristics of broadcast receivers and associated equipment Limits and methods of measurement of radio disturbance characteristics of household electrical appliances, portable tools and similar electrical apparatus Limits and methods of measurement of radio disturbance characteristics of flourescent lamps and luminaries immunity from radio interference of broadcast receivers and associated equipment Limits and methods of measurement of radio disturbance characteristics of information technology equipment Cabled distribution systems; Equipment for receiving and/or distribution from sound and television signals Safety requirements for mains operated electronic and related apparatus for household and similar general use (EC conformity marking) The manufacturer/importer also declares the conformity of above mentioned product with the actual required safety standards in accordance with LVD 73/23 EEC. Manufacturer/Importer Signature: _ Name: Ronald E. Wysong_Date: January 01, 1997_(Stamp) EMC Tested by electronic GmbH Important Safeguards i TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS PRODUCTS AC ADAPTOR TO RAIN OR MOISTURE. DO NOT OPEN THE AC ADAPTOR CASE, REFER SERVICING TO QUALIFIED PERSONNEL ONLY. WARNING: An appliance and cart combination should be moved with care. Quick stops, excessive force and uneven surfaces may cause the appliance and cart combina- tion to overturn. The lightning flash with arrow head symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated dangerous voltage within the products enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. The exclamation point within an equilateral triangle is intended to alert the user to the presence of impor- tant operating and maintenance (servicing) instruc- tions in the literature accompanying the appliance. WARNING: TO PREVENT FIRE OR ELECTRICAL SHOCK DO NOT EXPOSE THIS PRODUCTS AC ADAPTOR TO RAIN OR MOISTURE TO PREVENT ELECTRIC SHOCK, DO NOT USE THE AC ADAPTOR WITH AN EXTENSION CORD RECEPTACLE OR OTHER OUTLET UNLESS THE BLADES OF THE AC ADAPTOR CAN BE FULLY INSERTED TO PREVENT BLADE EXPOSURE. POUR PREVENIR LES CHOCS ELECTRIQUES, NE PAS UTILISER CETTE FICHE POLARISEE AVEC UN PROLONGATEUR, UNE PRISE DE COURANT OU UNE AUTRE SORTIE DE COUR- ANT, SAUF SI LES LAMES PEUVENT ETRE INSEREES A FOND SANS EN LAISSER AUCUNE PARTIE A DECOUVERT. CAUTION: ATTENTION: CAUTION! RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER OF AC ADAPTOR NO USER-SERVICABLE PARTS INSIDE REFER SERVICING TO QUALIFIED PERSONNEL 1. Read InstructionsAll the safety and operating instructions should be read before the appliance is operated. 2. Retain InstructionsThe safety and operating instructions should be retained for future reference. 3. Heed WarningsAll warnings on the appliance should be adhered to. 4. Follow InstructionsAll operating and use instructions should be followed. 5. CleaningUnplug this appliance from the wall outlet before cleaning. Do not use liquid cleaners or aerosol cleansers. Use a damp cloth for cleaning. 6. Do Not Use Attachmentsnot recommended by the manu- facturer or they may cause hazards. 7. Water and MoistureDo not use this product near waterfor example, near a bathtub, wash bowl, kitchen sink, laundry tub, in a wet basement, or near a swimming pooland the like. 8. AccessoriesDo not place this product on an unstable cart, stand, tripod, bracket, or table. The product may fall, causing serious injury to a child or adult, and serious damage to the appliance. 9. VentilationThis product should never be placed near or over a radiator or heat register. This product should not be placed in a built-in installation such as a bookcase or rack unless proper ventilation is provided or the manufacturers instructions have been adhered to. Any slots or openings in the cabinet are provided for ventilation. To ensure reliable operation of the product and to protect it from overheating, these openings must not be blocked or covered. The openings should never be blocked by placing the product on a bed, sofa, rug, or other similar surface. KEEP CURTAINS AND OTHER FLAMMABLE MATERIALS OUT OF DIRECT CON- TACT WITH THE AC ADAPTOR. 10. Power SourcesThis product should be operated only from the type of power source indicated on the marking label of the supplied AC Adaptor. If you are not sure of the type of power supplied to your home, consult your appliance dealer or local power company. 11. LightningFor added protection for this product during a lightning storm, or when it is left unattended and unused for long periods of time, unplug the AC adaptor from the wall outlet. 12. Power LinesAn outside antenna system should not be located in the vicinity of overhead power lines, other electric light or power circuits, where it can fall into such power lines or circuits. When installing an outside antenna system, extreme care should be taken to keep from touching such power lines or circuits as contact with them may be fatal. 13. OverloadingDo not overload wall outlets and extension cords as this can result in a risk of fire or electric shock. GROUND CLAMPS ANTENNA LEAD IN WIRE ELECTRIC SERVICE EQUIPMENT GROUND CLAMP NEC - NATIONAL ELECTRIC CODE EXAMPLE OF ANTENNA GROUNDING POWER SERVICE GROUNDING ELECTRODE SYSTEM (NEC ART 250, PART H) GROUNDING CONDUCTORS (NEC SECTION 810-21) ANTENNA DISCHARGE UNIT (NEC SECTION 810-20) INSTALL WIRING ACCORDING TO THE CANADIAN ELECTRICAL CODE EFFECTUER LE CABLAGE CONFORMEMENT AU CODE CANADIEN DE L ELECTRICITE ii Important Safeguards, continued 18. Outdoor Antenna GroundingBefore attempting to install this product, be sure the antenna or cable system is grounded so as to provide some protection against voltage surges and built-up static charges. a. Use No.10 AWG (5.3mm2) copper, No.8 AWG (8.4mm2) alumi- num, No.17 AWG (1.0mm2) copper-clad steel or bronze wire or larger, as ground wire. b. Secure antenna lead-in and ground wires to house with stand- off insulators spaced from 4 feet (1.22m) to 6 feet (1.83m) apart. c. Mount antenna discharge unit as close as possible to where lead-in enters house. d. A driven rod may be used as the grounding electrode where other types of electrode systems do not exist. Refer to the National Electrical Code, ANSI/NFPA 70-1990 for information. e. Use jumper wire not smaller than No.6 AWG 13.3mm2) copper or equivalent, when a separate antenna grounding electrode is used. 14. ServicingDo not attempt to service the AC adaptor yourself as opening or removing covers may expose you to dangerous voltage or other hazards. Refer all servicing to qualified service personnel. 15. Damage Requiring ServiceUnplug this product from the wall outlet and refer servicing to qualified service personnel under the following conditions: a. When the AC adaptor cord or plug is damaged. b. If the AC adaptor has been exposed to rain or water. c. If the product does not operate normally by following the operating instructions. Adjust only those controls that are covered by the operating instructions. An improper adjustment may result in damage and will often require extensive work by a qualified technician to restore the product to its normal operation. d. If the product has been dropped or the cabinet has been damaged. e. When the product exhibits a distinct change in performance this indicates a need for service. 16. Replacement PartsWhen replacement parts are required, be sure the service technician has used replacement parts speci- fied by the manufacturer or have the same characteristics as the original parts. Unauthorized substitutes may result in fire, electric shock or other hazards. 17. Safety CheckUpon completion of any service or repairs to this product, ask the service technician to perform safety checks to determine that the product is in proper operating condition. Thank you for purchasing a Drake SW8 World Band Shortwave Receiver. This receiver has been designed and manufactured to high quality standards, and will provide reliable operation for many years. Please carefully read the Owners Manual in order to take advantage of the many interesting features that will provide enjoyable listening to radio broadcasts around the world. Important Safeguards Table of Contents Introduction - General Description Introduction - Specifications Optional Accessories Introduction - Battery Operation and Installation Installation Unpacking Location Adjusting Carrying Handle Fixed Installation Portable Operation Antenna Requirements Installation Diagram Front Panel Description Telescoping WHIP Antenna Front Panel Display Rear Panel Description Aircraft Band Squelch Master Power Switch Getting Started General Operating Information Microprocessor Reset Beep Tones Direct Frequency Entry Shortwave METER Band Designator Entry Frequency Resolution Front Panel Lock (Unlock) AM Synchronous Operation SSB Operation FM Operation AGC Operation i iii 1 2 2 3 4 4 4 4 4 4 4 5 6 7 8 9 9 9 10 10 10 10 10 11 12 12 12 12 12 12 13 13 13 13 14 14 15 15 15 15 15 16 16 17 17 18 18 18 18 18 19 21 24 25 26 27 Memory Functions Memory Location Programming Recalling A Memory Location Deleting A Memory Location Scan Functions Memory Channel Skip Clock and Timer Functions Time Display Setting The 24 Hour Clocks Timer Operation Setting Timer On/Off Times Example for Setting Timer Enabling / Disabling Timer Example for Setting Overlapping Events Example for Setting Events On Two Different Memory Channels Special Use Features and Functions Lock All Entry to Keypad 10 kHz/9 kHz Broadcast Band Tuning Step Size Delete All Memory Channels Automatic Bandwidth Setting with Mode Selection Disable (Enable) Quick Reference Guide Memory Channel Log Suggested References Glossary of Terms Troubleshooting Service and Warranty Table of Contents iii iv Introduction - General Description 1 The SW8 is a microprocessor controlled, synthesized, world band receiver with continuous coverage capabil- ity from 500 kHz through 30 MHz which includes the AM broadcast and shortwave bands. Reception also includes FM broadcast (87 - 108 MHz) and Aircraft (118-137 MHz). The SW8 offers excellent sensitivity, selectivity, dynamic range and features that permit easy tuning of desired stations. Conveniently located front panel controls allow for rapid operator programming and ease of use. The unit can be operated from either the supplied AC Adaptor or from six ?D? cell batteries (not supplied) for portable operation. A low battery voltage indication is displayed when that condition exists. Three electronically switched IF filters are provided. The front panel liquid crystal display provides feedback of the current status of the receiver. The seven digit frequency display provides resolution to 100 Hz accuracy in the AM broadcast, Aircraft and Shortwave bands. Resolution to 20 kHz is displayed in the FM broadcast band mode. Backlighting of the display is selectable by a front panel button. To prolong battery life with internal battery operation, the backlighting automatically turns off after a short delay following a function change or retuning of the receiver. Reception modes include Lower/Upper Sideband (LSB), (USB), and AM in the Shortwave, AM broadcast and Aircraft bands. For the Shortwave and AM broadcast bands, a selectable synchronous detector (SYNC) allows for enhanced reception by eliminating or reducing distortion due to fading signals. During FM broadcast use, stereo reception is available through the use of headphones. Other built-in reception aids include selectable slow or fast AGC, RF attenuator for use in strong signal handling conditions and TONE control. Two independent, real time clocks provide a local and alternative time selection. Also provided is a two event timer. A programmable memory area allows for 70 indepen- dent receiver set up memories. These memories do not require battery backup and are thus unaffected by power interruptions. All parameters associated with a particular memory channel are stored including the frequency, mode, bandwidth, fast or slow AGC, RF attenuator and synchronous detector. These memory channels may be accessed manually or through a time scan with each channel monitored for a 5 second period. TONE VOLUME POWER? push HL TUNINGBAND SSB 5 BW 6 SCAN? MEM LAMP 9 STORE? VFO SKIP CLEAR? BEEP TIMER? CLOCK AGC 8 AM? SYNC 4 DEL 0 ATT 7 BCB 1 AIR 2 SW 3 F AGC S AM SYNC METER TIMER? ? +60? +40? +20? 9? 7? 5? 3? 1 KHz? ? SW M E M? ? 6.0 SW8 World Band ? Shortwave Receiver LSB 2 Introduction - Specificat