Kenwood_TK-760_H_TK-860_H_broch.pdf
Compact Synthesized FM Mobile Radios TK-760(H)/860(H) Specifications Applicable MIL-STD TK-760/760HTK-860/860H GENERAL Frequency rangeType 1: 148 174 MHz Type 2:136 156 MHz* *TK-760 only Type 1: 450 476 MHz Type 2: 470 496 MHz Number of channels32 semi-duplex channels32 semi-duplex channels Channel spacing30/25/15/12.5 kHz (PLL channel step 5/6.25 kHz) 25/12.5 kHz (PLL channel step 5/6.25 kHz) Input voltage13.6 V DC negative ground13.6 V DC negative ground Current drain Standby Receive Transmit (standard) Transmit (H-model) 0.4 A 1.0 A 8.0 A 12.0 A 0.4 A 1.0 A 8.0 A 10.0 A Duty cycleRX: 100%; TX: 20%RX: 100%; TX: 20% Operating temperature range -30 C +60 C-30 C +60 C Dimensions (W x H x D)140 x 40 x 170 mm140 x 40 x 170 mm Weight (net)1.0 kg1.0 kg FCC ID Type 1: Type 2: ALHTK-760-1 (TK-760) ALHTK-760H-1 (TK-760H) ALHTK-760-2 (TK-760) ALHTK-860-1 (TK-860) ALHTK-860H-1 (TK-860H) ALHTK-860-2 (TK-860) ALHTK-860H-2 (TK-860H) Applicable environmental EIA/TIA standard Shock, vibration, high humidity Shock, vibration, high humidity TK-760/760HTK-860/860H RECEIVER (Measurements made per EIA/TIA-204D) RF input impedance50 W50 W Sensitivity (12 dB SINAD)0.25 mV/wide 0.33 mV/narrow 0.28 mV/wide 0.35 mV/narrow Selectivity78 dB/wide 68 dB/narrow 75 dB/wide 65 dB/narrow Intermodulation73 dB/wide 63 dB/narrow 70 dB/wide 63 dB/narrow Spurious this permits communication with talk groups out- side of their own. DTMF decodeis also available creating a simple, inexpensive “selective call” paging for fleets of any size (10 digit codes, millions of combinations). It can be used to privately call individual mobiles within a fleet and also provide an alert out- put to trigger a vehicle horn, headlights, or strobe bar (option). KPS-10A DC Power Supply KLF-2 Line Noise Filter KES-3 External Speaker KMB-2B Mounting Case KMC-9 Control Station Desktop Microphone KMC-23 Hand Microphone KAP-1 PA/HA Unit KCT-18 Ignition Sense Cable KCT-19 Accessories Connection Cable TK760/860.qxd 7/9/99 6:06 pm Page 4 User Features Technology Features Synthesized channel frequency generationprovides up to 32 semi-duplex channels for any application, from the simplest to the most sophisticated. Wide/narrow channel bandwidth switching(25 kHz/12.5 kHz) is software controlled and programmed independently for each channel. This approach gives you compatibility with both existing wide band systems and emerging narrow band assignments. Wideband designprovides coverage across the most common VHF this permits communication with talk groups out- side of their own. DTMF decodeis also available creating a simple, inexpensive “selective call” paging for fleets of any size (10 digit codes, millions of combinations). It can be used to privately call individual mobiles within a fleet and also provide an alert out- put to trigger a vehicle horn, headlights, or strobe bar (option). KPS-10A DC Power Supply KLF-2 Line Noise Filter KES-3 External Speaker KMB-2B Mounting Case KMC-9 Control Station Desktop Microphone KMC-23 Hand Microphone KAP-1 PA/HA Unit KCT-18 Ignition Sense Cable KCT-19 Accessories Connection Cable TK760/860.qxd 7/9/99 6:06 pm Page 4 Compact Synthesized FM Mobile Radios TK-760(H)/860(H) Specifications Applicable MIL-STD TK-760/760HTK-860/860H GENERAL Frequency rangeType 1: 148 174 MHz Type 2:136 156 MHz* *TK-760 only Type 1: 450 476 MHz Type 2: 470 496 MHz Number of channels32 semi-duplex channels32 semi-duplex channels Channel spacing30/25/15/12.5 kHz (PLL channel step 5/6.25 kHz) 25/12.5 kHz (PLL channel step 5/6.25 kHz) Input voltage13.6 V DC negative ground13.6 V DC negative ground Current drain Standby Receive Transmit (standard) Transmit (H-model) 0.4 A 1.0 A 8.0 A 12.0 A 0.4 A 1.0 A 8.0 A 10.0 A Duty cycleRX: 100%; TX: 20%RX: 100%; TX: 20% Operating temperature range -30 C +60 C-30 C +60 C Dimensions (W x H x D)140 x 40 x 170 mm140 x 40 x 170 mm Weight (net)1.0 kg1.0 kg FCC ID Type 1: Type 2: ALHTK-760-1 (TK-760) ALHTK-760H-1 (TK-760H) ALHTK-760-2 (TK-760) ALHTK-860-1 (TK-860) ALHTK-860H-1 (TK-860H) ALHTK-860-2 (TK-860) ALHTK-860H-2 (TK-860H) Applicable environmental EIA/TIA standard Shock, vibration, high humidity Shock, vibration, high humidity TK-760/760HTK-860/860H RECEIVER (Measurements made per EIA/TIA-204D) RF input impedance50 W50 W Sensitivity (12 dB SINAD)0.25 mV/wide 0.33 mV/narrow 0.28 mV/wide 0.35 mV/narrow Selectivity78 dB/wide 68 dB/narrow 75 dB/wide 65 dB/narrow Intermodulation73 dB/wide 63 dB/narrow 70 dB/wide 63 dB/narrow Spurious & image rejection80 dB75 dB (except 1/2 IF) Audio output4 W at 4 W, with less than 5% distortion 4 W at 4 W, with less than 5% distortion Frequency stability0.0003%0.0003% Channel frequency spread26/20 MHz26 MHz TRANSMITTER (Measurements made per EIA-152C) RF power output Standard H-model 25 W 45 W 25 W 35 W ModulationF3E, 5 kHz/2.5 kHz for 100% at 1000 Hz F3E, 5 kHz/2.5 kHz for 100% at 1000 Hz Spurious & harmonics70 dB70 dB (H-model: 65 dB) FM noise50 dB (wide) 43 dB (narrow) 48 dB (wide) 42 dB (narrow) Microphone impedancelowlow Audio distortion3% at 1 kHz3% at 1 kHz Frequency stability0.0003%0.0003% Channel frequency spread26/20 MHz26 MHz Kenwood follows a policy of continuous advancement in development. For this reason specifications may be changed without notice. StandardMIL 810C Methods/ProceduresMIL 810D Methods/ProceduresMIL 810E Methods/Procedures Dust510.1/Procedure I510.2/Procedure I510.3/Procedure I Vibration514.2/Procedure VIII, X514.3/Procedure I514.4/Procedure I Shock516.2/Procedure I, II, III, V516.3/Procedure I, III, IV, V, VI516.4/Procedure I, III, IV, V, VI C E R T I F I E D I Wide/narrow channel bandwidth switching (multi-mode) for existing needs and future compatibility I 32-channel capability I Mobile data-ready port for MDT/modem applications I Installation-ready design I Compact, lightweight and rugged (MIL-STD 810 C/D/E) I Large backlit LCD display I Built-in QT, DQT and two-tone signaling I DTMF encode and decode options I Public address function (option) TK760/860.qxd 7/9/99 6:05 pm Page 2
