Kenwood_TK-2207_TK-3207_broch.pdf
Compact VHF/UHF FM Portable Radios TK-2207/3207 QT/DQT/DTMF The industry standard tone/code squelching formats QT and DQT provide system access and group segre- gation on shared frequencies. DTMF PTT ID is included for dispatch operations or for a simple remote control application. The DTMF decode capabilities include a selective call ID, transpond with ID,“wild card” group calling and radio stun. Both selective calling formats (FleetSyncTMand DTMF) have call alert tones and LED indications. PROGRAMMABLE FUNCTION KEYS The two side PF Keys are programmable for any of the many functions available on the TK-2207/3207, permitting a customized fit for specific users. OPTIMUM AUDIO Clear audio means confident communications. The TK-2207/3207 is equipped with a large speaker offering a full half-watt of audio output, while tailored response characteristics provide optimum clarity even in noisy environments. 14-HOUR BATTERY PACK The standard KNB-29N Ni-MH 14-hour* pack offers extended power in a compact, lightweight design. *Battery life is based on a 5% transmit / 5% receive / 90% standby duty cycle. TOUGH it can also be used when scanning. This eyes-free user interface adds a new dimension for portables worn on a belt,in a pocket or in dimly lit environments. Also, you are less likely to miss a call as a result of an accidental channel change. INTERNAL VOX/HANDS FREE READY Enjoy the convenience of hands-free operation using the optional KHS-21 or KHS-1 headset accessory. The internal VOX (voice-operated transmission) provides PTT control with the simple act of talking. VOX is great for specialized tasks and events where hands-free, constant or repetitive communications are necessary (10-level sensitivity adjustment). BUILT-IN VOICE SCRAMBLER A voice-inversion scrambler provides basic communi- cations security against casual eavesdropping. It can also be used to ensure confidential communications with TK-2160/3160 transceivers. FleetSyncTMPTT ID & SELCALL The TK-2207/3207 uses Kenwoods FleetSyncTMPTT ID protocol to identify units to a FleetSyncTM-capable dis- patch operation. Alternatively, the PTT ID function can be set per channel to encode one of eight Fleet List IDs for selective calling of groups or individual units. tk2207_3207m.qxd 04.10.26 3:12 PM Page 1 CL561M-E-2 Options All accessories and options may not be available in all markets. Contact an authorized Kenwood dealer for details and complete list of all accessories and options. I KNB-29N Ni-MH Battery Pack (1,500mAh) I KSC-31 Rapid Charger (3H) I KRA-22 VHF Low Profile Helical Antenna I KRA-23 UHF Low Profile Helical Antenna I KRA-26 VHF Helical Antenna I KRA-27 UHF Whip Antenna I KMC-17 Speaker Microphone I KMC-21 Compact Speaker Microphone I KHS-1 Head Set with VOX/PTT I KHS-21 Head Set I KBH-10 Belt Clip I KWR-1 Water Resistant Bag Specifications TK-2207TK-3207 GENERAL Frequency Range Type 1136-174 MHz450-490MHz Number of Channels16 Channel Spacing Wide/Narrow25kHz/12.5kHz Channel Step5, 6.25kHz Operating Voltage7.5V DC20% Battery Life (5-5-90 duty cycle with battery saver off) with KNB-29N (1500mAh)Approx. 14 hours Operating Temperature Range-30C +60C -10C +60C when KNB-29N in use Frequency Stability2.5ppm (-30C +60C) Antenna Impedance50 Channel Frequency Spread Type 138MHz40MHz Dimensions (W x H x D), Projections not Included Radio Only54 x 122 x 21.1 mm with KNB-29N54 x 122 x 33 mm Weight (net) Radio Only160 g with KNB-29N360g TK-2207TK-3207 RECEIVER (Measurements made per TIA/EIA-603) Sensitivity (12dB SINAD) Wide/Narrow0.25V/0.28V Selectivity Wide/Narrow70dB/60dB Intermodulation Distortion Wide/Narrow65dB/60dB Spurious Response65dB60dB Audio Output500mW with less than 10% distortion TRANSMITTER (Measurements made per TIA/EIA-603) RF Power Output High/Low5W/1W4W/1W Spurious Response65dB Modulation Wide/Narrow16KF3E/11KF3E FM Noise Wide/Narrow45/40dB Audio DistortionLess than 5% Kenwood reserves the right to change specifications and features without prior notice. FleetSyncTMis a trademark of Kenwood Corporation. Applicable MIL-STD Military StandardsMethods/Procedures Methods/Procedures Methods/Procedures Methods/Procedures MIL-STD 810CMIL-STD 810DMIL-STD 810EMIL-STD 810F Low Pressure500.1/Procedure I500.2/Procedure I, II500.3/Procedure I, II500.4/Procedure I, II High Temperature501.1/Procedure I, II501.2/Procedure I, II501.3/Procedure I, II501.4/Procedure I, II Low Temperature502.1/Procedure I502.2/Procedure I, II502.3/Procedure I, II502.4/Procedure I, II Temperature Shock503.1/Procedure I503.2/Procedure I503.3/Procedure I503.4/Procedure I, II Solar Radiation505.1/Procedure I505.2/Procedure I505.3/Procedure I505.4/Procedure I Rain506.1/Procedure I, II506.2/Procedure I, II506.3/Procedure I, II506.4/Procedure I, III Humidity507.1/Procedure I, II507.2/Procedure II, III507.3/Procedure II, III507.4 Salt Fog509.1/Procedure I509.2/Procedure I509.3/Procedure I509.4 Dust510.1/Procedure I510.2/Procedure I510.3/Procedure I510.4/Procedure I, III Vibration514.2/Procedure VIII, X514.3/Procedure I514.4/Procedure I514.5/Procedure I Shock516.2/Procedure I, II, V516.3/Procedure I, IV516.4/Procedure I, IV516.5/Procedure I, IV *Rain (Drip/Blowing Rain): assumes that the supplied accessory jack cover or a Kenwood audio accessory is installed. tk2207_3207m.qxd 04.10.26 3:12 PM Page 2
