Vertex_VX-1700_broch.pdf
HF Multi Mode Mobile Radio VX-1700 Frequency Coverage : RX: 30 kHz 30.0000 MHz in 10 Hz Steps TX: 1.600 30.0000 MHz A1A (CW), J3E (LSB/USB), A3E (AM), J2B (USB/LSB), 200 Memory Channels (arranged in five banks) Alpha-Numeric Labeling of Memory Channels Power Output: 125 Watts (A1A, J2B, J3E 1.6000 3.9999 MHz) 100 Watts (A1A, J2B, J3E 4.0000 30.000 MHz) 31 Watts AM Carrier (A3E 1.6000 3.9999 MHz) 25 Watts AM Carrier (A3E 4.0000 30.000 MHz) Mobile Antenna (Optional) Selcall / Telcall Built-in Selcall Telcall Message Call Position Request Call Position Send Call (with GPS receiver connected) Beacon Request Call ALE Operation (requires optional ALE-1 unit) Dual Watch Operation External Automatic Antenna Tuner, FC-30 (Coax) and FC-40 (Wire) Available VOX Noise Blanker Dimmer Function CW Side Tone Function CW Semi-break-in Transcrypt SSB Encryption Unit SC20-455 Available (Optional) PC Programmable MIL-STD 810D / E / F General Specifications Receiver Frequency Range 30 kHz 30.0000 MHz Transmitter Frequency 1.600 30.0000 MHz Emission Modes A1A (CW), J3E (LSB/USB), A3E (AM), J2B (USB/LSB) Frequency Synthesizer Steps 10 Hz, 100 Hz, 1 kHz Frequency Stability 1 ppm (14 F 131 F / 10 C +55 C) TYP Operating Temperature Range 14 F 131 F (10 C +55 C) Antenna Impedance 50 Ohms Supply Voltage 13.8 Volts DC 15%, negative ground Power Consumption Standby 25 mA Receive, no signal 1.0 A Receive 1.5 A Transmit 22 A (125 Watts output) Dimensions (WxHxD) 9.5 x 3.9 x 11.2 (241 x 99 x 285 mm) Weight (approx.) 9.5 lbs (4.3 kg) Accessories Fax 714/827-8100 Vibration Shock 514.3/Procedure I Cat. 10514.4/Procedure I Cat. 10514.5/Procedure I Cat. 20/24 Figure 514.5C-1 516.5/Procedure I Applicable MIL-STD StandardMIL 810D Methods/ProceduresMIL 810E Methods/ProceduresMIL 810F Methods/Procedures The Vertex Standard VX-1700 is a low-cost, integrated HF communications transceiver designed for the Land Mobile market. The VX-1700 includes 200 memory channels (arranged in five banks) with Alpha-Numeric labeling of Memory channels. And the Selcall feature allows paging of a single transceiver or groups of transceivers by a dispatch center. Available options include the VL-1000/VP-1000 1 kW Linear Amplifier/Power Supply, FP-1030A AC Power Supply, FC-30 Automatic External Antenna Tuner (for 50 Ohm unbalanced antenna feedlines), FC-40 Automatic External Antenna Tuner (for an end-fed random-length wire or long whip antenna), YA-30 Broadband Dipole Antenna, YA-007FG Mobile Antenna, MD-200A8X Desktop Microphone, MLS-100 External Speaker, and the ALE-1 Automatic Link Establishment Unit which automatically selects the channel with the best LQA (Link Quality Analysis) score from the programmed channels. Specifications are subject to change without notice or obligation. Transmitter Specifications? Power Output*1 125 Watts (A1A, J2B, J3E 1.6000 3.9999 MHz)*2 100 Watts (A1A, J2B, J3E 4.0000 30.000 MHz) 31 Watts AM Carrier (A3E 1.6000 3.9999 MHz) 25 Watts AM Carrier (A3E 4.0000 30.000 MHz) Modulation Types J3E: PSN type modulator A3E: Low-level (early stage) Spurious Radiation 56 dB (Harmonics) J3E Carrier Suppression Better than 50 dB below peak output Undesired Sideband Suppression Better than 60 dB below peak output J3E Audio Response Not more than 6 dB from 400 Hz 2500 Hz Occupied Bandwidth A1A: less than 0.5 kHz J3E: less than 3.0 kHz A3E: less than 6.0 kHz Microphone Impedance 200 10 k Ohms (600 Ohms Nominal) *2 100 Watts when using FC-30. *1 Duty Cycle RX : TX = 4 min : 1 min
