Alinco_DX-R8_broch.pdf
LW/MW/SW All Mode Desktop Communications Receiver DX-R8T/E Come Experience the Excitement of Shortwave Radio! Now you can enjoy the thrill of listening to live radio signals from all over the world with the Alinco DX-R8T/E. A new desktop radio designed to be aff ordable without compromising performance, the DX-R8T/E boasts a communications grade receiver circuit, 3 ceramic fi lters (FM/AM, SSB, CW) with narrow fi lter function, excellent 1ppm stability and a large, easy-to-read LCD screen. The I/Q mode with supporting SDR freeware lets you output the I/Q signal from the 3.5mm stereo jack and decode DRM using only a PC and a sound card. Simple operating commands and straight-forward key layout make this a radio that you can start enjoying from the moment you fi rst turn it on. Packed with many features normally found only in more expensive receivers, the DX-R8T/E is ready to capture the imagination of everyone from a beginner in the world of shortwave to the most experienced shortwave listener. Attention : This product requires an optional power-supply (3A-class /12Vdc) and an external antenna to operate. Shown with optional accessories. INCORPORATED Simple-Clean-Dependable Authorized Dealer: FNFNENEE-AX Ver.1.0R8 Printed in Japan ALINCO, INC. Electronics Division Yodoyabashi Dai-Bldg 13F, 4-4-9 Koraibashi, Chuo-ku, Osaka 541-0043 Japan Phone: 06-76362362 Fax: 06-62083802 http:/www.ALINCO.com E-mail: exportalinco.co.jp Copyright Alinco,Inc., Osaka, Japan. All rights reserved. Although Alinco has designed this brochure to be as accurate and comprehensive as possible, we reserve the right to make changes at any time to our equipment line, optional accessories, specifi cations, standard accessories, or availability of any such devices we manufacture and distribute. Please note that certain products and accessories may not be available in all countries of distribution therefore consult your Authorized Alinco Dealer for product availability and pricing. Colors of images herein may appear slightly diff erent from actual products due to print. Projections are not included in the declared dimension values.Cellular frequencies can t be received. I/Q signal output allows use of third-party SDR software 150 kHz35MHz (T-model up to 30MHz) in AM/USB/LSB/CW/FM and IQ modes Front and rear jacks make connecting accessories easy Direct frequency input to the dual VFO system Detachable front-control panel off ers more mounting options Large LCD display makes operation simple Front-speaker and powerful 2W audio output makes it easy to hear signals Rugged, die-cast chassis Narrow ceramic fi lters (AM 2.4kHz/SSB 1kHz) and 0.5kHz audio-fi ltering for CW 4-level RF preamp/attenuator IF shift and RIT reduces interference Noise blanker enables clearer reception 3 banks/600 memory channels make it easy to save banks of favorite frequencies Two sets of programmed search pairs and varieties of scanning modes Auto-power-off , Sleep-timer, Dial and Key locks, RX indicator illumination and more! Computer utility software makes it easy to manage settings and edit memories Monitor shortwave signals from aviation, navigation and data sources Instruction manual EDC-37 DC cable Standard accessories Optional accessories Specifications Weight Dimensions Frequency stability Current drain Power requirements Memories Receiving mode Frequency range DX-R8T/E LW/MW/SW All Mode Desktop Communications Receiver 1ppm 1A max 13.8V DC 15% (11.7 to 15.8V) 200 channels 3 banks = 600ch AM/FM/CW/USB/LSB/IQ E: Caution Restrictions may apply to receive communications such as public-safety, air-band etc. in some countries. Please consult with the local authority before operating these products. 240 (W) x 100 (H) x 293 (D) mm 9.45 (W) x 3.97 (H) x 11.54 (D) in Features 4.1 kg (9 lbs) T : 150KHz29.99999MHz E : 150KHz34.99999MHz Cigar-Plug EDC-36 Noise fi lter PC cable USB port ERW-7EDC-37 Front control remote cable DC cable EDS-17 Description Model Remarks (spare) 5m cable/bracket/ panel 7-digit alphanumeric channel tags make operation simple! Free utility/SDR software is downloardable from Standard accessories declared herein are our factory default and may vary at moment of sales depending on the market and Dealers sales policy. RIT variable range Audio output power Spurious and image rejection ratio AM, FM Selectivity Intermediate frequency FM AM CW Sensitivity Receiver type 1.2kHz More than 2.0W (8,10%THD) More than 70dB 6kHz/6dB 18kHz/60dB 2.4kHz/6dB 4.5kHz/60dB 1st 71.75MHz 2nd 455kHz 28 to 30MHz 6dBu(0.5uV) 1.8 to 30MHz +6dBu(2uV) 0.15 to 1.8MHz +20dBu(10uV) 1.8 to 30MHz 12dBu(0.25uV) 0.15 to 1.8MHz 0dBu(1uV) Double conversion superheterodyne SSB SSB, CW, AM (narrow) Operating temperature Ground method Antenna impedance 10 to 60 (+14 F to +140 F) Negative ground 50 unbalanced (without projections)
