Anritsu 10580-00028F 电路图.pdf

Site Master S113B, S114B, S331B, S332B, Antenna, Cable and Spectrum Analyzer Users Guide Hand-Held Tester for Transmission Lines and other RF Components RadioFans.CN 收音机爱 好者资料库 RadioFans.CN 收音机爱 好者资料库 WARRANTY The Anritsu product(s) listed on the title page is (are) warranted against defects in materials and workmanship for one year from the date of shipment. Anritsus obligation covers repairing or replacing products which prove to be defec- tive during the warranty period. Buyers shall prepay transportation charges for equipment returned to Anritsu for warranty repairs. Obligation is limited to the origi- nal purchaser. Anritsu is not liable for consequential damages. LIMITATION OF WARRANTY The foregoing warranty does not apply to Anritsu connectors that have failed due to normal wear. Also, the warranty does not apply to defects resulting from improper or inadequate maintenance by the Buyer, unauthorized modification or misuse, or op- eration outside the environmental specifications of the product. No other warranty is expressed or implied, and the remedies provided herein are the Buyers sole and exclusive remedies. TRADEMARK ACKNOWLEDGMENTS MS-DOS, Windows, Windows 95, Windows NT, and Windows 98 are registered trademarks of the Microsoft Corporation. Anritsu and Site Master are trademarks of Anritsu Company. NOTICE Anritsu Company has prepared this manual for use by Anritsu Company personnel and customers as a guide for the proper installation, operation and maintenance of Anritsu Company equipment and computer programs. The drawings, specifications, and information contained herein are the property of Anritsu Company, and any un- authorized use or disclosure of these drawings, specifications, and information is prohibited; they shall not be reproduced, copied, or used in whole or in part as the basis for manufacture or sale of the equipment or software programs without the prior written consent of Anritsu Company. June 200210580-00028 Copyright ? 1999-2002 Anritsu Co.Revision: F RadioFans.CN 收音机爱 好者资料库 Table of Contents Chapter 1 - General Information1-1 Introduction. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-1 Description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-1 Standard Accessories. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-1 Options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-2 Optional Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-2 Performance Specifications . . . . . . . . . . . . . . . . . . . . . . . . . 1-3 Preventive Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-6 ESD Precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-6 Calibration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-7 Annual Verification. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-7 Chapter 2 - Getting Started2-1 Introduction. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-1 Charging a New Battery . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-1 Charging the Battery in the Site Master . . . . . . . . . . . . . . . . . . . . . 2-1 Charging the Battery in the Optional Charger. . . . . . . . . . . . . . . . . . 2-1 Determining Remaining Battery Life . . . . . . . . . . . . . . . . . . . . 2-2 Battery Life . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-3 Important Battery Information . . . . . . . . . . . . . . . . . . . . . . . . . . 2-4 Chapter 3 - Functions and Operations3-1 Introduction. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-1 Front Panel Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-1 Test Connector Panel. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-2 Keypad Controls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-3 Soft Keys . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-6 Power Monitor Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-18 Printing. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-19 Printing a Screen . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-19 Printer Switch Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-20 Symbols . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-21 Self Test . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-21 Error Codes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-22 Self Test Errors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-22 Range Errors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-23 Using the Soft Carrying Case. . . . . . . . . . . . . . . . . . . . . . . . 3-25 i Chapter 4 - Measurements4-1 Introduction. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-1 Measurement Functions . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-1 Power On Procedure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-2 Calibration Procedure . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-2 Selecting the Frequency Range . . . . . . . . . . . . . . . . . . . . . . . . . . 4-3 Performing a Calibration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-3 Saving the Setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-4 Recalling a Setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-4 Saving a Display to Memory . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-4 Recalling a Display From Memory . . . . . . . . . . . . . . . . . . . . . . . . 4-4 SWR (Return Loss) and Cable Loss Measurement . . . . . . . . . . . . 4-6 Required Equipment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-6 Device-Under-Test Specification. . . . . . . . . . . . . . . . . . . . . . . . . . 4-6 Procedure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-6 Selecting the Measurement Mode . . . . . . . . . . . . . . . . . . . . . . . . . 4-6 Selecting the Frequency Range . . . . . . . . . . . . . . . . . . . . . . . . . . 4-6 Performing a Calibration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-7 SWR or Return Loss Measurement . . . . . . . . . . . . . . . . . . . . . . . . 4-8 Set the Amplitude Scale and Limit Line . . . . . . . . . . . . . . . . . . . . . 4-8 Setting the Markers. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-9 Cable Loss Measurement . . . . . . . . . . . . . . . . . . . . . . . . . . 4-10 Setting the Amplitude Scale . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-10 Setting the Markers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-10 DTF Measurement . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-12 Required Equipment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-12 Device-Under-Test Specification . . . . . . . . . . . . . . . . . . . . . . . . . 4-12 Procedure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-12 Selecting the Measurement Mode . . . . . . . . . . . . . . . . . . . . . . . . 4-12 Performing a Calibration. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-13 DTF Measurement (Determining the Length of the Cable) . . . . . . . . . . 4-14 Setting the Amplitude Scale . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-14 Setting the Marker . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-14 DTF Measurement (Determining the quality of the cable.) . . . . . . . . . . 4-16 Setting the Amplitude Scale . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-16 Setting the Markers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-16 Making Power Measurements . . . . . . . . . . . . . . . . . . . . . . . 4-18 Entering Power Monitor Mode. . . . . . . . . . . . . . . . . . . . . . . . . . 4-18 Zeroing the Power Monitor. . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-18 Measuring High Input Power Levels. . . . . . . . . . . . . . . . . . . . . . . 4-18 Displaying Power in dBm and Watts . . . . . . . . . . . . . . . . . . . . . . 4-18 Displaying Relative Power . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-18 Making a Measurement with the Spectrum Analyzer . . . . . . . . . . 4-19 Example Measuring a 900 MHz signal. . . . . . . . . . . . . . . . . . 4-19 Set the Site Master to Spectrum Analyzer mode . . . . . . . . . . . . . . . . 4-19 Set the center frequency . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-19 Set the frequency span . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-20 Setting the marker. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-20 Set the Reference Level . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-21 ii Chapter 5 - Software Tools Program5-1 Description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-1 Requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-1 Communication Port Setting. . . . . . . . . . . . . . . . . . . . . . . . . 5-1 Changing COM Port SettingsWindows 95/98/NT . . . . . . . . . . . . . . . 5-1 Software Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-3 Plot Capture. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-3 Capture multiple traces to a database. . . . . . . . . . . . . . . . . . . . . . . 5-4 Capture single or multiple traces to PC screen. . . . . . . . . . . . . . . . . . 5-4 Program Operation. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-5 Fault Location Software . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-5 Smith Chart Software . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-5 Saving a Plot as a Windows Metafile or as a Spreadsheet File . . . . . . 5-6 Pasting a Plot in Graphic or Spreadsheet Format . . . . . . . . . . . . . 5-6 Saving Data to a Database . . . . . . . . . . . . . . . . . . . . . . . . . . 5-6 “Drag-n-Drop” . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-6 Printing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-7 Appendix A - Reference DataA-1 Coaxial Cable Technical Data. . . . . . . . . . . . . . . . . . . . . . . . A-1 iii/iv Chapter 1 General Information Introduction This chapter provides a description, performance specifications, optional accessories, pre- ventive maintenance, and calibration requirements for the Site Master models S113B, S114B, S331B, and S332B. Throughout this manual, the term Site Master will refer to the models S113B, S114B, S331B, and S332B. ModelFrequency Range S113B S114B S331B S332B 5 to 1200 MHz 5 to 1200 MHz, 100 kHz to 1200 MHz Spectrum Analysis 25 to 3300 MHz 25 to 3300 MHz, 100 kHz to 3000 MHz Spectrum Analysis Description The Site Master is a hand held SWR/RL (standing wave ratio/return loss), and Distance-To- Fault (DTF) measurement instrument that includes a built-in synthesized signal source. All models include a keypad to enter data and a liquid crystal display (LCD) to provide graphic indications of SWR or RL over the selected frequency range and selected distance. The Site Master is capable of up to 2.5 hours of continuous operation from a fully charged field-replaceable battery and can be operated from a 12.5 dc source. Built-in energy conser- vation features can be used to extend battery life over an eight-hour work day. The Site Master is designed for measuring SWR, return loss, or cable insertion loss and lo- cating faulty RF components in antenna systems. Power monitoring is available as an op- tion. Site Master models S114B and S332B include spectrum analysis capability. The displayed trace can be scaled or enhanced with frequency markers or a limit line. A menu option provides for an audible “beep” when the limit value is exceeded. To permit use in low-light environments, the LCD can be back lit using a front panel key. Standard Accessories The Software Tools PC-based software program provides a database record for storing measurement data. Site Master Software Tools can also convert the Site Master display to a Microsoft Windows? 95/98/NT workstation graphic. Measurements stored in the Site Mas- ter internal memory can be downloaded to the PC using the included null-modem serial ca- ble. Once stored, the graphic trace can be displayed, scaled, or enhanced with markers and limit lines. Historical graphs can be overlaid with current data, and underlying data can be extracted and used in spreadsheets or for other analytical tasks. The Site Master Software Tools program also performs DTF (Distance To Fault) and Fault Location. 1 - 1 1 The following items are supplied with the basic hardware. ?Soft Carrying Case ?AC-DC Adapter ?Automotive Cigarette Lighter 12 Volt DC Adapter, ?CDROM disk containing the Software Tools program. This program contains Fault Lo- cation (DTF) and Smith Chart functions ?Serial Interface Cable (null modem type) ?One year Warranty (includes battery, firmware, and software) ?Users Guide Options ?Option 5 Add RF Wattmeter Power Monitor Optional Accessories ?Anritsu Precision N (m) Open/Short/Load, 42 dB, Part No. OSLN50LF ?Anritsu Precision N (f) Open/Short/Load, 42 dB, Part No. OSLNF50LF ?Anritsu Precision N (m) Short/Open, Part No. 22N50 ?Anritsu Precision N (f) Short/Open, Part No. 22NF50 ?Site Master Precision N (m) Load, 42 dB, Part No. SM/PL ?Site Master Precision N (f) Load, 42 dB, Part No. SM/PLNF ?7/16 (m) Precision Open/Short/Load, Part No. 2000-767 ?7/16 (f) Precision Open/Short/Load, Part No. 2000-768 ?Adapter, Precision N (m) to N (m), Part No. 34NN50A ?Adapter, Precision N (f) to N (f), Part No. 34NFNF50 ?Adapter, 7/16 (f) to N (m), Part No. 510-90 ?Adapter, 7/16 (f) to N (f), Part No. 510-91 ?Adapter, 7/16 (m) to N (m), Part No. 510-92 ?Adapter, 7/16 (m) to N (f), Part No. 510-93 ?Adapter, 7/16 DIN (m) to 7/16 DIN (m), Part No. 510-96 ?Adapter, 7/16 DIN (f) to 7/16 DIN (f), Part No. 510-97 ?Armored Test Port Extension Cable, 1.5 meter, N (m) to N (f), Part No. 15NNF50-1.5A ?Armored Test Port Extension Cable, 3.0 meter, N (m) to N (f), Part No. 15NNF50-3.0A ?Armored Test Port Extension Cable, 5.0 meter, N (m) to N (f), Part No. 15NNF50-5.0A ?Armored Test Port Extension Cable, 1.5 meter, N (m) to N (m), Part No. 15NN50-1.5A 1 - 2 Chapter 1 General Information ?Armored Test Port Extension Cable, 3.0 meter, N (m) to N (m), Part No. 15NN50-3.0A ?Armored Test Port Extension Cable, 5.0 meter, N (m) to N (m), Part No. 15NN50-5.0A ?Armored Test Port Extension Cable, 1.5 meter, N (m) to 7/16 DIN (f), Part No. 15NDF50-1.5A ?Armored Test Port Extension Cable, 1.5 meter, N (m) to 7/16 DIN (m), Part No. 15ND50-1.5A ?RF Detector, 1 to 3000 MHz, N(m) input connector, 50 Ohms, Part No. 5400-71N50 ?Transit Case for Site Master, Part No. 760-215A ?Ante