gigatronics_product_catalog 电路图.pdf

Product Catalog Microwave Synthesizers- Bench/VXI Power Meters- Bench/VXI Scalar Network Analyzers Power Sensors Automation Test Software RadioFans.CN 收音机爱 好者资料库 1 2400B SERIES MICROWAVE SYNTHESIZER The 2400 Series Microwave Synthesizers are the industrys first general purpose microwave synthesizers providing highly stable, fast frequency switching signals while maintaining low phase noise performance that you expect in a microwave synthesizer. In addition to these features, the 2400B series delivers high output power making it an excellent test solution for a wide range of CW, LO substitution, modulated, sweep, and step frequency applications for R enabling faster testing, list download speeds, and more device throughput Xpress Auto-programmer Visual Basic -100 dBm 20 GHz Option 26: -20 dBm to 20 GHz; -10 dBm 20 GHz Power Offset: 0 to 10 dB Resolution 0.05 dB 2400B SERIES SPECIFICATIONS RadioFans.CN 收音机爱 好者资料库 3 MICROWAVE SYNTHESIZERS 2400B SERIES SPECIFICATIONS CONTINUED Temperature Stability: 0.025 dB/C Output Source Match (typical): < 2.0:1 into 50 ACCURACY (dB) (Specifications apply over 15 to 35C range and degrades 5 dBm -20 dBm -110 dBm 0.01 - 20 GHz 1.0 0.8 1.3 20 - 40 GHz 1.2 1.0 1.5 SPECTRAL PURITY Harmonics (Specifications for harmonics above instrument frequency range are typical.) Frequency (GHz) Standard (at 6 dBm) 0.01 - 20 GHz3 -55 dBc 20 - 40 GHz -30 dBc Sub-Harmoncs Frequency (GHz) Standard (at 6 dBm) 0.01 - 2 GHz -80 dBc 2 - 20 GHz -60 dBc 20 - 40 GHz -50 dBc Spurious (Specification is -45 dBc typical for offsets < 300 Hz) Frequency (GHz) Standard (at 6 dBm) 0.01 - 16 GHz -60 dBc 16 - 32 GHz -54 dBc 32 - 40 GHz -48 dBc Residual FM (typical) Frequency (GHz) 50 Hz - 15 kHz (bandwidth) 0.01 - 16 GHz <40 Hz 16 - 32 GHz <80 Hz 32 - 40 GHz 5 MHz) 0.01 - 2 GHz -130 dBm/Hz 2 - 20 GHz -145 dBm/Hz 20 - 40 GHz -140 dBm/Hz SSB PHASE NOISE: Frequency Offset from Carrier (dBc/Hz) GHz 100 Hz 1 kHz 10 kHz 100 kHz 1 MHz 0.85 -92 -111 -112 -123 -130 1.85 -86 -105 -106 -117 -135 5.6 -75 -97 -98 -105 -130 10 -74 -92 -92 -101 -128 18 -68 -89 -90 -99 -123 23 -63 -85 -86 -93 -118 30 -61 -83 -84 -91 -115 FREQUENCY Sensitivity: TTL levels (polarity selectable) Impedance: 50 Internal Function Generator: AM/FM Modulation Source Waveforms: Sine, Square, Triangle, Ramp, Gaussian Noise Rate: AM: 0.01 Hz to 10kHz FM: 0.01 Hz to 1 MHz Resolution: 0.01 Hz Accuracy: Same as time base AM Out: 2V, peak to peak into 10 k Load FM Out: 2V, peak to peak into 10 k Load PM Modulation Source Width: 0.05 uSec. to 0.01 Sec. Pulse Repetition Interval: 0.2 uS to 1 Sec. Sync. Out Delay: 0 to 10 mSec. Resolution: 10 nSec. Accuracy: 0.1% typical. Worst case: 2% of setting or 20 nsec, whhichever is greater AUTOMATION XPRESS REQUIREMENTS 20 MB Disk Space Windows 2000, Windows XP 128 MB RAM or greater 2400S Series Models Only 2400S Series include: Rear RF Output Delete Front Panel Option Front Panel LED Indicators: Power, EXT REF, Unleveled AXI Interface INPUTS above 1 GHz, complies with MIL-STD-461C REO2 (part 2). Power Requirement: Voltage Max Current(52000A) Max Current(50000A) (Vdc) (mA) (mA) +24 175 2500 +12 100 1200 +5 2500 Not Used +5 standby Not Used Not Used - 2 Not Used Not Used - 5.2 Not Used Not Used -12 700 1600 -24 30 200 Power Rating: 52000B: 30 W maximum. 50000B: 100 W maximum. Physical Characteristics: 52000B: Dimensions: C-size, one-slot, VXI standard, 30 mm (1.2 in) wide, 234 mm (9.2 in) high, 340 mm (13.4 in) deep. Weight: 2.27 kg (5.0 lbs). 50000B: Dimensions: C-size, two-slot, VXI standard, 60 mm (2.4 in) wide, 234 mm (9.2 in) high, 340 mm (13.4 in) deep. Weight: 5.45 kg (12.0 lbs). OPTIONS Option 26: Provides a built-in 90 dB step attenuator in 10 dB steps (reduces maximum leveled power by 1 dB from 8 to 16 GHz and 2 dB above 16 GHz). 52000B/50000B VXIBUS MICROWAVE SYNTHESIZER MODULE/CONTROL SPECIFICATIONS MICROWAVE SYNTHESIZERS 16 LOCAL BUS CHARACTERISTICS (52000B) Capability: Controls from 1 to 8 Series 50000B synthesizer modules. Digital Output Signals (to synthesizer modules): Output is to the right (as viewed from the front) on the 12 local bus lines on connector P2. TIME BASE CHARACTERISTICS (52000B) Internal: 10 MHz temperature compensated crystal oscillator; aging rate 1 x 10-6/year after 20 minutes of continuous operation. External (automatically overrides internal time base): 10 MHz 1 x 10-6 or better; 1.5 Vpp. Time Base Related Analog Output Signals (derived from internal or external time base): 10 MHz, ECL levels; 330 MHz, .15 dBm, typical, into 50; 10 MHz Time Base Out, 2 Vpp into 50. FRONT PANEL CONNECTORS (52000B) 10 MHz Output: Type SMB male. 330 MHz Output: Type SMB male. Time Base Input: Type BNC female. Time Base Output: Type BNC female. INPUTS REQUIRED (50000B) Local Bus Input Signals (from a compatible Giga-tronics VXIbus module): Inputs from the left (as viewed from the front), on the 12 local bus lines on connector Time Base Related Analog Input Signals (from a compatible Giga-tronics VXIbus module): 10 MHz, ECL levels; 330 MHz, -15 dBm, typical. OUTPUTS SUPPLIED (50000B) RF Output: RF signal produced by the module; available at the RF OUT connector. Digital Output Signals (replicates corresponding input signals to control other Giga-tronics VXIbus modules): Output to the right (as viewed from the front), on the 12 local bus lines on connector P2. Time Base Related Analog Output Signals (buffered from corresponding inputs; used to drive other Giga-tronics VXIbus modules): 10 MHz, ECL levels; 330 MHz, .15 dBm, typical (at REFERENCE OUT connectors). FRONT PANEL CONNECTORS (50000B) 10 MHz Input and Output: Type SMB male. 330 MHz Input and Output: Type SMB male. AM In: Type SMB male. FM In: Type SMB male. PM In: Type SMB male. RF Out: Type SMA female. FRONT PANEL INDICATORS (50000B) Lock: Green LED. Level: Green LED. RF On: Green LED. FREQUENCY CHARACTERISTICS (50000B) Range Model Number Frequency Range 50208B 2 to 8 GHz 50212B 2 to 12 GHz 50218B 2 to 18 GHz 50220B 2 to 20 GHz 50612B 5.4 to 12.5 GHz 50618B 6 to 18 GHz 51218B 12 to 18 GHz 50008B 0.01 to 8 GHz 50012B 0.01 to 12 GHz 50018B 0.01 to 18 GHz 50020B 0.01 to 20 GHz Resolution: 1 Hz throughout the frequency range. Accuracy and Stability: Identical to, and determined by, the time base oscillator selected in the 52000B Control Module. RF OUTPUT POWER PARAMETERS (50000B) Maximum Leveled Output: +8 dBm, 0.01 to 2 GHz; +12 dBm, 2 to 12 GHz; +9 dBm, 12 to 20 GHz. Resolution: 0.1 dB Minimum Leveled Output: .10 dBm (-15 dBm typical); -90 dBm with option 26. RF Off: Typically attenuates a 0 dBm signal to -140 dBm at the output connector. Output Accuracy (internally leveled): 2 dB Flatness: Included in accuracy. Output Impedance: 50, nominal. Output SWR: <2:1 SPECTRAL PURITY (50000B) Harmonics: (up to maximum frequency of synthesizer): 50 dBc (measured at +5 dBm, 2 to 20 GHz); 40 dBc (measured at +5 dBm, .01 to 2 GHz). Subharmonics: None. Nonharmonics (tested at 0 dBm): Offset Frequency Level Typical <100 kHz <40 dBc <50 dBc 100 kHz to < 1MHz <50 dBc 1MHz <60 dBc <70 dBc SSB PHASE NOISE (dBc): Frequency Offset from Carrier (dBc/Hz) GHz 1 kHz 10 kHz 100 kHz <2 -70 -75 -97 2 to 8 -75 -77 -97 8 to 12 -70 -75 -97 12 to 16 -65 -73 -97 16 to 18 -60 -72 -97 18 to 20 -60 -70 -97 Residual FM (50 Hz to 15 kHz bandwidth): <200 Hz rms, below 8 GHz; <300 Hz rms, from 8 GHz to 16 GHz; <400 Hz rms, above 16 GHz. AMPLITUDE MODULATION (AM) (50000B) AM specifications apply for waveforms where envelope peak is at least 1 dB below maximum specified output power, with FM off and PM off. However, AM may be operated simultaneously with FM and/or PM. AM Envelope Parameters (measured at 7 dB below max rated power). Depth: 0 to 82%, 90% typical. Bandwidth (50% depth; 3 dB points referenced to 1 kHz): 10 Hz to 10 kHz, (50 kHz typical). Harmonic Distortion (relative to externally supplied AM envelope): <10% at 1 kHz rate and 50% depth, 5% typical. Externally Supplied AM Envelope Waveform: Any waveform compatible with band width considerations. Rate: See Bandwidth, above. Sensitivity: 1 Vpp=50% modulation 10% (i.e., 40 to 60%) at a 1 kHz rate, measured at 7 dB below max rated power. Input Impedance: 600 , nominal, ac coupled. FREQUENCY MODULATION (FM) (50000B) FM specifications apply with AM and PM off. However, FM may be operated simultaneously with AM and/or PM. FM Envelope Parameters Deviation: 10 kHz to 5 MHz, peak. Bandwidth: 3 dB, 10 Hz to 1 MHz. Residual FM: 1.5 kHz rms, typical. Distortion (relative to externally supplied FM envelope): 80 dB. Rise/Fall Time: 50 ns wide (leveled output), positive level=RF on. 52000B VXIBUS MICROWAVE SYNTHESIZER CONTROL MODEL 50 MHz, nominal 0.0 dBm Accuracy: 1.2% worst case for one year, over temperature range of 5 to 35C. VSWR: 30 dB) 0 dBm. 800 MHz - 1 GHz Synthesizer Specifications: (Option 12) Power Range: +15 dBm to -30 dBm, settable in 1 dB steps. Frequency: 800 MHz to 1 GHz, settable in 1 MHz steps. Power Stability: <0.1 dB/Hour Frequency Accuracy: 0.05% Instrumentation Linearity: 0.02 dB over any 20 dB range from -70 to +16 dBm. 10 0.02 dB + (0.05 dB/dB) from +16 to +20 dBm. 0.04 dB from -70 to +16 dBm. Graph show linearity plus worst case zero set, and noise versus input power Temperature Coefficient of Linearity: <0.3%/C temperature change following Power Sweep calibration. 24 hour warm-up required. Zeroing Accuracy: (CW) Zero Set12: <50 pW, <100 pW with 80400A and 80600A Series Modulation Power Sensors. <200 pW with 80700A Series Sensors. Zero Drift12: <100 pW during 1 hour, <200 pW with 80400A and 80600A Series Sensors, <400 pW with 80700A Series Sensors. Noise: <50 pW, <100 pW with 80400A and 80600A Series Modulation Power Sensors. <200 pW with 80700A Series Sensors. Measurable over any 1 minute interval after zeroing, 3 standard deviations. REMOTE INPUTS/OUTPUTS V Prop F Input (BNC)13: Sets calibration factors using source VpropF output. Analog Output (2) (BNC): Provides an output voltage of 0 to 10V in either Lin or Log units.13 Trigger Input (BNC): TTL trigger input signal for Swift and Fast Buffered modes. GPIB Interface: IEEE-488 and IEC-625 remote programming. RS232 Interface: Programmable serial interface, DB-9 connector. GENERAL SPECIFICATIONS Temperature Range: Operating: 0 to 55C (+32 to +131F)14 Storage: -40C to 70C (-40 to +158F) Power Requirements: 100/120/220/240V 10%, 48 to 440 Hz, 25VA typical Physical Characteristics: Dimensions: 215 mm (8.4 in) wide, 89 mm (3.5 in) high, 368 mm (14.5 in) deep Weight: 4.55 kg (10lbs) ORDERING INFORMATION POWER METERS 8651A Single Input Universal Power Meter (includes 1 sensor cable) 8652A Dual Input Universal Power Meter includes 2 sensor cables) ACCESSORIES One manual, one power cord. POWER METER OPTIONS 01 Rack mount kit 03 8651A Rear Panel Sensor and Calibrator Connections 04 8652A Rear Panel Sensor and Calibrator Connections 05 Soft Carry Case 07 Side Mounted Carrying Handle 08 Transit Case, (Includes Soft Carry Case) 09 Dual Rack Mount Kit (with assembly instructions) 10 Dual Rack Mount Kit (factory assembled) 12 1 GHz, 50 MHz Switchable Calibrator 13 8651A Rear Panel Input Connector 14 8652A Rear Panel Input Connectors 10 Depending on sensor used. 11 MAP (Modulated Average Power), PAP (Pulse Average Power), BAP (Burst Average Power). 12 Specified performance applies with maximum averaging and 24 hour warm-up at constant temperature. 13 Operates in Normal Mode only. 14 Display contrast reduces above 50 C. 15 Does not apply to 80701A Sensor below 500 MHz. 8650 POWER METER SPECIFICATIONS 19 8540C UNIVERSAL POWER METER SPECIFICATIONS Specifications describe the instruments warranted performance, and apply when using 80300A, 80400A, and 80600A Series sensors. Typical performance, (shown in italics), is non-warranted. METER Frequency Range: 10 MHz to 40 GHz 10 Power Range: -70 dBm to +47 dBm (100 pW to 50 Watt) 10 Single Sensor Dynamic Range:10 CW Power Sensors: 90 dB Peak Power Sensors: 40 dB, Peak 50 dB, CW Modulation Power Sensors: 87 dB, CW 80 dB, MAP/PAP 11 60 dB, BAP 11 Display Resolution: User selectable from 1 dB to 0.001 dB in Log mode, and from 1 to 4 digits of display resolution in Linear mode. Meter Functions Measurement Modes (Sensors): CW (80300A, 80350A, 80400A, 80600A, and Series) Peak (80350A Series) MAP/PAP/BAP 11 (80400A and 80600A Series) Averaging: User selectable, auto-averaging or manual from 1-512 readings. dB Rel and Offset: Power display can be offset by -99.999 to +99.999 dB to account for external loss/gain. Configuration Storage Registers: Allows up to 20 front panel setups. Power Measurements and Display Configurations: Any two of the following channel configurations, simultaneously: A, B, A/B, B/A, A-B, B-A, DLYA, DLYB ACCURACY Calibrator:Power Sweep calibration signal to dynamically linearize the sensors (Type N connector). Frequency: 50 MHz, nominal Graph shows linearity plus worst case zero set and noise versus input power. 0.0 dBm Accuracy: 1.2% worst case for one year, over temperature range of 5 to 35C. VSWR: 33 dB) Instrumentation, Relative to 0 dBm: 0.02 dB over any 20 dB range from -70 to +16 dBm. 0.02 dB + (0.05 dB/dB) from +16 to +20 dBm. 0.04 dB from -70 to +16 dBm. Temperature Coefficient of Linearity: <0.3%/C temperature change following Power Sweep calibration. 24 hour warm-up required. Zeroing Accuracy: (CW) Zero Set: 12 <50 pW, <100 pW with 80400A and 80600A Series Modulation Power Sensors. Zero Drift: 12 <100 pW during 1 hour Noise: <50 pW, <100 pW with 80400A and 80600A Series Modulation Power Sensors. Rise time Sensor frequency range from 0.03 or 0.75 to 18.5, 26.5 or 40 GHz Power Range: -20 to +20 dBm Pulse; -40 to +20 dBm CW Measurement resolution is 100 ps Measure the same point on repetitive pulses at over 70 m measurements/second Built-in power sweep calibrator with NIST traceable accuracy METER Frequency Range: 30 MHz to 40 GHz depending on sensors (see sensors specifications) Power Range: Pulse: -20 to +20 dBm CW: -40 to +20 dBm (see sensor specifications) ACCURACY The uncertainty of microwave power measurements depends on several factors, the most imporant being the effective mismatch of both the power sensor and the RF source. Excluding mismatch effects, the measurement uncertainties of the instrument are: Calibration Power Uncertainty (at 0 dBm): 1.5% Linearity after Automatic Calibration: 3% (at stable temperature) Temperature Coefficient of Linearity at Ambient 5 C, CW and Peak; typical: -10 dBm: negligible, 0 to 50 C <-10 dBm; 0.5%/ C, 15 to 50 C; 1.0%/ C, 0 to 15 C (Instrument indicates if 5 C calibration range is exceeded.) Uncertainty due to Zeroing and Noise: CW (Avg.=500): < 10 nW, 15 to 50 C; < 20 nW, 0 to 15 C Peak (Avg.=100): < 3.5 W, 15 to 50 C; < 5.0 W, 0 to 15 C Single Pulse (typ.): < 15 W, 15 to 50 C; < 30 W, 0 to 15 C Time Base Range: 1.2 ns/div to 20 ms/div (12 ns to 200 ms time window,