GIG_8651A_8652A_menu 电路图.pdf

Menu Structure Manual 31470, Rev. E, April 2001D-5 Figure D-4: Meter Setup Menu Structure 8 bits Rel dB mW Sensor Setup Display Setup Meter Setup Main Menu See page D-6 Select item to be altered Config Service Display Return Setup Menu Configure Display A - 46.12 BWaiting for triggerPk MAP dBm Set Delay 1.000sB Calibrator Sto/Rcl See page D-2 & D-3 OK Config Cancel GPIB V/F In Mode: 8600Addr: 13 Analog OutA Strip Chart Sound RS-232 T-Gate Analog Out B Histogram Power Meter Configuration OK On Off Cancel Calibrator OFF OK Recall Cancel Recall/Store Setup Level dBm Level mW Frequency Cancel OKSetup #1 Name Use to move the cursor Numeric Graphic Delay OK Gate Time Cancel Delay Gate Time: 0.070 ms 0.400 ms Burst Edge External Trigger Falling screen is essentially the same as External Trigger Rising 0.00 dBm 1.000 Ghz Recall a previously saved setup from memory. Save the current setup to memory. Store Cancel Recall Setup Choose a stored setup OK Store Setup Select and ID for saving current setup Cancel GPIB Configuration OK Cancel OKV/F Config Mode:SCPI Zero Scale 2 -1 Cancel OK Analog OutputA or B SensorA Histogram Vert Horiz Zoom In Zoom Out Exit Cursor: - 46.89 dBm 1.45% 2% -48.62 dBm -43.62 dBm CAL ON Interval: 1 min (sampling complete) 0% Select Mode Reset Reset Run Pause Cur on Cur off Exit STRIP CHARTCAL ON A-15.75 dBm 33.5 sec (crsr) -7 -27 Rising Falling Delay OK Gate Time Cancel Delay Gate Time: 0.070 ms 0.400 ms External Trigger Rising CDF Select Mode CCDF External Gate Cancel OK Gate/Trigger RS-232 Config Baud Rate:9600 Parity: Stop Bits: Data Bits: None 1 Line 1 (measuringA) Cancel OK Select Source Log Lin Set Scale Cancel OK Baud Length Parity Stop bits External Gate Ext Trig Rising Ext Trig Falling Burst Edge Analog OutputA or B Holdoff:0.500 ms Gate Low OK Gate High Cancel Select External Gate Level SensorA Gated - ext gate low Listen &Talk Setup ID # 1 Old Name (no name) Cancel OK Recall Preset (detA: BAP) (detB: Peak) (AO) (CAL ON) Line 1:A -(Lin) + (Bar Graph) Line 2: B (Log) Line 3: B (Lin) Line 4: Off Previous Settings None Sensor B SensorA & B SensorA SensorA Gated - ext trig rising Line 2 (measuring B) Select Source Log Lin Set High Set Low Line 1 (measuringA) Line 2 (measuring B) High: 0.0V = 100.0 mW1 Low: 0.0V = 0.0 mW SetVolts Set Power Use arrow keys to select characters ABCDEFG HIJKLMN OPQRSTU VWXYZ 01234567890 1 3 -1 SourceData Line 2 3 Other Off A B Data Line 1 Configuration Data Line 1 Configuration SourceData Line 2 3 Other Off A BA A/B A-B PKHold CrFact SourceData Line32 Other Off A BMin/Max A Pk A 11.11 CW dBm Mean & SD Line # A B Data Line 1 Configuration Cancel OK Select Source Select Data dB mW Config Cancel OK Select Source Select Data dB mW Config Cancel OK Select Limits Bar Graph Data Line 1 Configuration A 11.11 CW dBm A 11.11 CW dBm Data Line 1 Configuration A 11.11 CW dBm A 11.11 CW dBm Data Line 1 Configuration Increase or decrease resolution Set High and Low Limits: EndLow Cancel High OK Off High End:dBm+ 0.002 Low End:-80.00dBm Min 11.11 dBm Max 11.11 dBm Config RadioFans.CN 收音机爱 好者资料库