215_Pro_Speaker_Cabinet_Service_Manual 电路图.pdf

215 PRO (This is the model name for warranty claims) Fender Musical Instruments Corporation, 8860 East Chaparral Road Suite 100 Scottsdale, AZ 85250 Issued: September, 2007 p/n 2215200000 (120V) SERVICE MANUAL ATTENTION: WARRANTY SERVICE PROCEDURES The Fender 215 PRO is covered by the standard FMIC 5 Year Electronic Limited Warranty as it applies to Speaker Enclosures. PCB Assemblies and Electronic Components are covered for 5 years. Speakers, Drivers, Cabinet Assemblies, and Cabinet Hardware are covered for 1 year. Cables and wiring harnesses for 90 days. This enclosure is considered to be repairable to the component level in the field. If you have questions please contact the FMIC Customer Service Support Center at (866) 345-3642 or Email RadioFans.CN 收音机爱 好者资料库 215 PRO (This is the model name for warranty claims) 2 September, 2007 IMPORTANT NOTICE Copyright 2007 FMIC. All rights reserved. All information contained herein is CONFIDENTIAL and PROPRIETARY and is the property of Fender Musical Instruments Corporation. It is not to be sold or assigned to another party and is disclosed solely for use by Fender Authorized Service Centers for purposes of product service and maintenance. All information is not to be dis- closed to others without the expressed permission of Fender Musical Instruments Corporation. All specifications are subject to change without no- tice. This information and any copies produced electronically or otherwise must be surrendered upon demand of Fender Musical Instruments Corporation. Parts marked with two asterisks (*) indicate the required use of that specific part. This is neces- sary for RELIABILITY and SAFETY requirements. DO NOT USE A SUBSTITUTE! PARTS LIST CODES The description codes used in the itemized Parts Lists are defined below: CAPACITOR CODES CAP AE = Aluminum Electrolytic CAP CA = Ceramic Axial CAP CD = Ceramic Disk CAP CR = Ceramic Radial CAP MPF = Metalized Polyester Film CAP MY = Mylar CAP PFF = Polyester Film/Foil RESISTOR CODES RES CC = Carbon Comp RES CF = Carbon Film RES FP = Flame Proof RES MF = Metal Film RES MOX = Metal Oxide RES WW = Wire Wound HARDWARE CODES BLX = Black Oxide CR = Chrome Plated HWH = Hex Washer Head M = Machine Screw NI = Nickel Plated OHP = Oval Head Phillips PB = Particle Board PHP = Pan Head Phillips PHPS = Pan Head Phillips Sems SMA = Sheet Metal A Point SMB = Sheet Metal B Point SS = Stainless Steel TF = Thread Forming ZI = Zinc Plated RadioFans.CN 收音机爱 好者资料库 215 PRO (This is the model name for warranty claims) 3 SPECIFICATIONS Model Name: 215 PRO Release Number: PR 730 Part Number: 2215200000 Impedance: 4 ohms Sensitivity: 101 dB, 1w-1m Power Handling: 800 Watts, Continuous 1600 Watts, Program Drivers: Two 15” (38.1 cm) Fender Special Design cast frame woofers with 3” (7.6 cm) voice coil and 105 0z. (2.98 kg) magnet (p/n 0075912000) One horn tweeter with 1” (2.5 cm) voice coil and 8 oz. (0.23 kg) magnet (p/n 0048847000) Connections: Dual, parallel wired, ” (6.35 mm) high current input jacks and Speakon connector Cabinet: ” (1.9 cm) Baltic Birch plywood Dimensions Height: 36 5/8 in (93.0 cm) Width: 26 in (66.0 cm) Depth: 17 in (43.2 cm) Weight: 110 lb (50.0 kg) Product specifications are subject to change without notice RadioFans.CN 收音机爱 好者资料库 215 PRO (This is the model name for warranty claims) 4 SERVICE NOTES Input Assembly removal is required for lamp re- placement and is accomplished by following these steps: 1. Remove the four screws from the input panel corners. 2. Pull the panel out at the top until the L-pad is clear of the mounting plate, then pull upward on the assembly. 3. Use a small screwdriver or other tool to remove the blown lamp, which is visible through a cut- out in the circuit board. 4. Remove the spare lamp stowed on the side of the circuit board and install it where the blown lamp was removed. 5. Install the input assembly in the reverse order of removal. PCB EXCHANGE POLICY Parts marked with a single asterisk (*) in the Part Lists are not field replaceable. If a failure due to one of these components is detected, please con- tact the FMIC Customer Service Department to order the complete PCB Assembly. 215 PRO (This is the model name for warranty claims) * Non-serviceable part. Replace complete parent assembly. See PCB EXCHANGE POLICY section above. shaded Unique Fender part. Order directly from the FMIC Parts Department. shaded + * Access to this part or assembly is controlled. Please contact the FMIC Customer Service Department. * Safety Requirement part. Replacement must match Safety AgencyValue, if specified Type, if specified Approval Mark(s) if on part. shaded + * Both a unique Fender part and a Safety Requirement part as defined above. 5 .PARTS LIST: PCB ASSEMBLY QTY. PART # DESCRIPTION REFERENCE DESIGNATION 1 0075753000 *PCB ASSEMBLY BASS PRO SPEAKERS 1 0051858000 INDUCTOR AIR CORE .18mH L1 2 0051857000 LAMP TYPE 561 LMP1, LMP2 4 0053475000 LAMP CLIP 4 0012555000 EYELET-ROLLED FLANGE G.S. 3-4 2 0051861000 CAP MPF RDL 3.3Uf 250v 10% C1, C2 2 0029175000 JACK PHONE ” HI CURRENT PC J1, J2 PARTS LIST: INPUT ASSEMBLY QTY. PART # DESCRIPTION REFERENCE DESIGNATION 1 0075735000 * INPUT ASSEMBLY FBA BASS PRO SPKRS 1 0075605000 PLATE INPUT FBA PRO SERIES 1 0049348000 CONTROL L PAD 8 OHM 50W 1 0064463000 KNOB PLASTIC W/POINTER XOVER 2 0016436000 WSHR LCK INTL 3/8x.687x.065 NI 2 0031153000 WSHR FLAT 3/8x.614 NI 2 0016352000 NUT HEX 3/8-32x3/32 TK NI 1 0040432000 JACK SPEAKON 4-POLE (NL-4MP) 2 0059914000 SCRW TF 4-40X3/8 FHP BLK PARTS LIST: CABINET ASSEMBLY QTY. PART # DESCRIPTION REFERENCE DESIGNATION 1 0074214000 *CABINET ASSEMBLY 215 PRO 16 0021972000 NUT T 10-32x3/4 STR 3 PRNG BLX 2 0059919000 FOOT RUBBER 2.50 DIA 2 0059916000 WSHR FLAT 7/16X1X.070 STL ZI 2 0059918000 SCRW 3/8-16X1 HH ZINC 2 0012094000 NUT T 3/8-16x7/16 TWIST 4 PRNG 8 0059920000 CORNER STL/NI STACKING C1335N 32 0026571000 SCRW SMAB 8X5/8 THP NI 2 0059843000 “CASTER FXD 3” WHL W2080K/HD” 52 0033380000 SCRW SMAB 8x1 THP BLX 2 0059844000 HANDLE RECESSED STEEL BAR 2 0074224000 RAIL GLIDE HDPE 215/610 PRO 10 0059921000 SCRW SMA 10X1 THP BLK 1 0054842000 PLATE KICK 810 PRO 10 0037543000 SCRW SMAB 8x3/4 OHP NI 3.35 0051343000 VINYL TOLEX 4227A SY PARTS LIST: END ITEM ASSEMBLY QTY. PART # DESCRIPTION REFERENCE DESIGNATION 1 0074214000 *CABINET ASSEMBLY 215 PRO 2 0075912000 SPEAKER 15 INCH 8 OHM CAST FRAME 1 0075735000 *INPUT ASSEMBLY FBA BASS PRO SPEAKERS 215 PRO (This is the model name for warranty claims) * Non-serviceable part. Replace complete parent assembly. See PCB EXCHANGE POLICY section above. shaded Unique Fender part. Order directly from the FMIC Parts Department. shaded + * Access to this part or assembly is controlled. Please contact the FMIC Customer Service Department. * Safety Requirement part. Replacement must match Safety AgencyValue, if specified Type, if specified Approval Mark(s) if on part. shaded + * Both a unique Fender part and a Safety Requirement part as defined above. 6 PARTS LIST: END ITEM ASSEMBLY QTY. PART # DESCRIPTION REFERENCE DESIGNATION 1 0073681000 GRILLE 215/610 PRO 1 0074228000 *BADGE X-LARGE FBA 1 0048847000 HORN FOSTER 8 OHM 1 0054212000 INPUT MOUNTING PLATE SUNN 410H 8 0030858000 SCRW SMA 8x5/8 PHP NI 4 0026553000 SCRW M 8-32 x 3/8 PHP BLX 4 0033380000 SCRW SMAB 8 x 1 THP BLX 11 0036112000 SCRW SMAB 6 x 1-1/4 OHP BLX w/WS 16 0057975000 SCREW M 10-32 x 1-1/4 FLHP STL BL 22 0055734000 RUBBER FOOT ” DIA 4 0059644000 SCRW CAP 6-32x3/8 HEX SKT NI 4 0069393000 NUT 6-32 HEX EXT LOCK 1 0055831000 GASKET HORN BASSMAN SERIES 215 PRO (This is the model name for warranty claims) 7 Schematics and Drawings Service Diagram (Schematic) .Bassman 410 PRO Input Assembly .FBA Bass Pro Speakers End Item Assembly .215 PRO FRACT. -+/-1/32 .X -+/-.050 .XX -+/-.015 .XXX-+/-.010 ANGLES-+/-.5 DEGREES HOLE DIA-+.005 -.001 UNMARKED ANGLES ARE 90 DEGREES. TOL. UNLESS NOTED FINISH MATERIAL NONE NONE D R C CORONA, CALIFORNIA U.S.A. ENGINEER DRAWN DATE DATEDATEDATE DATE DFT.ENG.ENG. APPROVED SHEET SCALE SIZEREVPART NUMBER 1of1 TITLE 0075735000 INPUT ASSEMBLY FBA BASS PRO SPEAKERS DA 05/17/2007 NONE FENDER MUSICAL INSTRUMENTS CORP. B A FENDER MUSICAL INSTRUMENTS CORP. DATE/ARCHIVEEC NUMBERREVBY 123456 THIS DOCUMENT CONTAINS INFORMATION OF A PROPRIETARY NATURE TO FENDER MUSICAL INSTRUMENTS AND IS SUBMITTED TO YOU IN CONFIDENCE AND SHALL NOT BE DISCLOSED OR TRANSMITTED TO OTHERS WITHOUT AUTHORIZATION FROM ASSEMBLY 09/27/2007 SERVICE MANUAL DOCUMENT ITEMQTYDESCRIPTION 102SCRW TF 4-40X3/8 FHP BLK 91JACK SPEAKON 4-POLE (NL-4MP) 8ARTAPE VINYL NITRITE W/ADHESIVE 71PCB ASSEMBLY BASS PRO SPEAKERS 62NUT HEX 3/8-32x3/32 TK NI 52WSHR FLAT 3/8x.614 NI 42WSHR LCK INTL 3/8x.687x.065 NI 31KNOB PLASTIC W/POINTER XOVER 21CONTROL L PAD 8 OHM 50W 11PLATE INPUT FBA PRO SERIES 6 7 1 8 2X 5 3 9 10 4 REF 2X 2X 2X 2 GRN RED BLU WHT ORN BRN BK LOCATIONS WIRING AND SOLDERING BLU GRN 8 WIRE TIE 4.25.03 2X 4.00.03 2X FRACT. -+/-1/32 .X -+/-.050 .XX -+/-.015 .XXX-+/-.010 ANGLES-+/-.5 DEGREES HOLE DIA-+.005 -.001 UNMARKED ANGLES ARE 90 DEGREES. TOL. UNLESS NOTED FINISH MATERIAL NONE SEE PARTS LIST D R C CORONA, CALIFORNIA U.S.A. ENGINEER DRAWN DATE DATEDATEDATE DATE DFT.ENG.ENG. APPROVED SHEET SCALE SIZEREV DRAWING NUMBER TITLE END ITEM ASSEMBLY 215 PRO 2215200000 DA 06/07/2007 1of2 NONE FENDER MUSICAL INSTRUMENTS CORP. B A FENDER MUSICAL INSTRUMENTS CORP. DATE/ARCHIVEEC NUMBERREVBY 123456 THIS DOCUMENT CONTAINS INFORMATION OF A PROPRIETARY NATURE TO FENDER MUSICAL INSTRUMENTS AND IS SUBMITTED TO YOU IN CONFIDENCE AND SHALL NOT BE DISCLOSED OR TRANSMITTED TO OTHERS WITHOUT AUTHORIZATION FROM ASSEMBLY 16 19 18 SEE DETAIL A 9 2 8 15 14 13 12 1 7 6 4X 11X 4X 4X 2X 16X 11 22X 4 3 4X 58X 17 10 09/27/2007 (N.S.) = NOT SHOWN SERVICE MANUAL DOCUMENT BLACK WIRE FROM UPPER SPEAKER - TO LOWER SPEAKER -. WHITE WIRE FROM UPPER SPEAKER + TO LOWER SPEAKER +. GREEN WIRE FROM INPUT ASSEMBLY TO - ON TWEETER. BLUE WIRE FROM INPUT ASSEMBLY TO + ON TWEETER. BROWN WIRE FROM INPUT ASSEMBLY TO - ON UPPER SPEAKER. ORANGE WIRE FROM INPUT ASSEMBLY TO + ON UPPER SPEAKER. ITEMQTYDESCRIPTION 201WIRE SET FINAL 215 PRO (N.S.) 191LABEL INPUT 215 PRO 181LABEL POP 215 PRO 171LABEL SERIAL MEXICO 164NUT 6-32 HEX EXT LOCK 154SCRW CAP 6-32x3/8 HEX SKT NI 141BADGE X-LARGE FBA 1311SCRW SMAB 6x1-1/4 OHP BLX w/WS 1222RUBBER FOOT 3/4 DIA 111GRILLE 215/610 PRO 1016SCREW M10-32x1-1/4 FLHP STL BL 92SPEAKER 15 INCH 8 OHM CAST FRAME 84SCRW SMAB 8x1 THP BLX 71GASKET HORN BASSMAN SERIES 61HORN FOSTER 8 ohm 58SCRW SMA 8x5/8 PHP NI 44SCRW M 8-32x3/8 PHP BLX 31INPUT MOUNTING PLATE SUNN 410H 21INPUT ASSEMBLY FBA BASS PRO SPEAKERS 11CABINET ASSEMBLY 215 PRO GRN BLU BRN ORG BK WHT SPEAKER ORIENTATION DETAIL SEE NOTES ON SHEET 1 FOR SPEAKER WIRE CONNECTIONS SCALE: NONE + + RED CODED TERMINAL LOGO, P.O.P. LABEL PLACEMENT AND STANDOFF DETAIL AS HOLES WILL PERMIT SCALE: NONE SERVICE MANUAL DOCUMENT 09/27/2007 14 11 REF REF 17.50 3.88 1.53 26.59 27.66 33.47 .50 8.67 12.19 23.88 8.41 20.38 R FENDER MUSICAL INSTRUMENTS CORP. CORONA, CALIFORNIA U.S.A. ENGINEER DRAWN DATE DATEDATEDATE DATE DFT.ENG.ENG. APPROVED SHEET SCALE SIZEREVPART NUMBER TITLE END ITEM ASSEMBLY 215 PRO 2215200000 DA 06/07/2007 2of2 NONE THIS DOCUMENT CONTAINS INFORMATION OF A PROPRIETARY NATURE TO FENDER MUSICAL INSTRUMENTS AND IS SUBMITTED TO YOU IN CONFIDENCE AND SHALL NOT BE DISCLOSED OR TRANSMITTED TO OTHERS WITHOUT AUTHORIZATION FROM FENDER MUSICAL INSTRUMENTS CORP. DATE/ARCHIVEEC NUMBERREVBY 123456 A B C D ASSEMBLY DETAIL A SOME PARTS OMITTED FOR CLARITY CUT VINYL FLAP OFF ALONG BOTTOM EDGE OF ITEM 3 (INPUT MOUNTING PLATE)