5-1Manual 电路图.pdf

Make sure you return your warranty card so that we may keep you up- to- date on new Klipsch products and promotions. As always, if you have any questions, contact your local authorized Klipsch dealer. For your records: Model: ProMedia 5.1 System Date Purchased 3502 WOODVIEW TRACE, SUITE 200 INDIANAPOLIS, IN 46268- 1104 1.800.KLIPSCH WWW.KLIPSCH.COM RadioFans.CN 收音机爱 好者资料库 RadioFans.CN 收音机爱 好者资料库 I M P O RTANT SAFETY INSTRUCTIONS CAUTION: RISK OF ELECTRIC SHOCK! DO NOT OPEN! CAUTION! To reduce the risk of electric shock and fire, do not remove the cover or back plate of the device enclosure. There are no user serviceable parts inside. Refer servicing to a Klipsch authorized service center. CAUTION! The international symbol of a lightning bolt inside a triangle is intended to alert the user to uninsulated dangerous voltage within the device enclosure. The international symbol of an exclamation point inside a triangle is intended to alert the user to the presence of important operating, maintenance and servicing information in the manual accompanying the device. WARNING! To reduce the risk of fire or electrical shock, do not expose this equipment to rain or moisture. 1. Read Instructions All safety and operating instructions should be read before operating the device. 2. Retain Instructions The safety and operating instructions should be retained for future reference. 3. Heed Warnings All warnings on the device and in the operating instructions should be adhered to. 4. Follow instructions All operating and safety instructions should be followed. 5. Attachments Do not use attachments not recommended by the product manufacturer as they may cause hazards. 6. Water and Moisture Do not use this product near water (for example, near a bath tub, wash bowl, kitchen sink, or laundry tub; in a wet basement; or near a swimming pool; and the like). 7. Ventilation Slots and openings in the cabinet are provided for ventilation and to ensure reliable operation of the product and to protect it from overheating, and these openings must not be blocked or covered. The openings should never be blocked by placing the product on a bed, sofa, rug, or other similar surface. This product should not be placed in a built- in installation such as a bookcase or rack unless proper ventilation is provided or the manufacturers instructions have been adhered to. 8. Heat This product should be situated away from heat sources such as radiators, heat registers, stoves, or other products (including amplifiers) that produce heat. 9. Power Sources This product should be operated only from the type of power source indicated on the marking label. If you are not sure of the type of power supply in your home, consult with your product dealer or the local power company. For products intended to operate from battery power, or other sources, refer to the operating instructions. 10. Grounding This product is equipped with a three- wire grounding- type plug, a plug having a third (grounding) pin. This plug will only fit into a grounding- type power outlet. This is a safety feature. If you are unable to insert the plug into the outlet, contact your electrician to replace your obsolete outlet. Do not defeat the safety purpose of the grounding- type plug. 11. Power- Cord Protection Power- supply cords should be routed so that they are not likely to be walked on or pinched by items placed upon or against them, paying particular attention to cords at plugs, convenience receptacles, and the point where they exit from the product. 12. Overloading Do not overload wall outlets, extension cords, or integral convenience receptacles as this can result in a risk of fire or electrical shock. 13. Lightning and Periods of Non- Use For added protection for this product during a lightning storm, or when it is left unattended and unused for long periods of time, unplug it from the wall outlet and disconnect the antenna or cable system. This will prevent damage to the product due to lightning and powerline surges. 14. Cleaning Unplug this product from the wall outlet before cleaning. Do not use liquid cleaners or aerosol cleaners. Use a damp cloth for cleaning. 15. Object and Liquid Entry Never push objects of any kind into this product through openings as they may touch dangerous voltage points or short- out parts that could result in a fire or electric shock. Never spill liquid of any kind on the product. 16.Damage Requiring Service Unplug this product from the wall outlet and refer servicing to qualified service personnel under the following conditions: a) When the power- supply cord or plug is damaged, b) If liquid has been spilled, or objects have fallen into the product, c) If the product has been exposed to rain or water, d) If the product does not operate normally by following the operating instructions. Adjust only those controls that are covered by the operating instructions as an improper adjustment of other controls may result in damage and often will require extensive work by a qualified technician to restore the product to its normal operation, e) If the product has been dropped or damaged in any way, and f) When the product exhibits a distinct change in performance this indicates a need for service. 17. Replacement parts When replacement parts are required, be sure the service technician has used replacement parts specified by the manufacturer or have the same characteristics as the original parts. Unauthorized substitutions may result in fire, electric shock, or other hazards. 18. Safety Check Upon completion of any service or repairs to this product, ask the service technician to perform safety checks to determine that the product is in proper operating condition. 19. Servicing Do not attempt to service this product yourself as opening or removing covers may expose you to dangerous voltage or other hazards. Refer all servicing to qualified service personnel. If this unit is purchased outside of the U.S., please contact your local dealer or distributor for service center information. If purchased inside the U.S. and dealer service is not available, contact Klipsch Customer Service for a return authorization (RA) number before shipping. For further service information, contact: KLIPSCH CUSTOMER SERVICE 1- 888- 554- 5665 137 COUNTYRD 278 HOPE, AR USA71801 WE WANTYOUR NEW SPEAKER SYSTEM TO LOOK AS GOOD AS ITDID LEAVING THE FACTORY. PLEASE CHECK PROMPTLY FOR TRANSIT DAMAGE. Carefully unpack your new speaker system and check the components against the packing list. In extreme circumstances, items may have become damaged in transit. If any damage is discovered, notify the delivery service and/or dealer where the system was purchased. Make a request for inspection, and follow the instructions for evaluation. Be sure to keep the product with its original shipping carton. Klipsch also recommends that you save your packing material to aid in future transportation. RadioFans.CN 收音机爱 好者资料库 PACKING LIST 4 Satellite speakers with pedestals and rubber isolation feet attached 1 Center channel with adjustable rear post and rubber isolation feet attached 1 Control tower with rubber isolation feet attached 1 Subwoofer with rubber isolation feet attached 2 Packets of individual speaker interconnects (3 front, 2 rear) 1 Owners manual 1 Packet of 3 individual audio cables 1 Power cord WIRING INSTA L L AT I O N DO NOTC O N N E C TTHE POWER CORD TO THE PROMEDIA5.1 UNTILA L L CONNECTIONS HAVE BEEN MADE AND ARE CORRECT. TURN OFF THE POWER TO YOUR COMPUTER, OR A N Y OTHER DEVICE, BEFORE MAKING THE CONNECTIONS. Please refer to the quick connection guide included in this manual before wiring. Most PCs are set up with at least a two- channel soundcard. If your soundcard has only one stereo output jack, it is a two- channel soundcard. The ProMedia 5.1 is optimized for connection to and use with a 5.1 channel soundcard, or any audio device with discrete channel outputs in a 5.1 configuration. The ProMedia 5.1 has five channels and a subwoofer. It can be adapted to deliver two channels, four channels or six channels of audio, depending upon hookup. There is no harm if the rear left and right (L/R) and center/sub channels are not fully utilized (not plugged into), as in the case of two- channel play. If the device you are hooking up has RCAjacks, a mini- plug adapter will be necessary and is readily available at a local Radio Shackstore or any stereo, appliance or computer retail outlet. SPEAKER PLACEMENT 1.Two of the satellite speakers should be symmetrically positioned on each side of your computer video monitor to balance the sound in the front soundstage. All satellite speakers are magnetically shielded, and should not cause interference with the computer monitor. 2.The center channel should be placed on top of the monitor or television, utilizing the adjustable rear post to optimize the angle for the listening position. 3.Position the remaining two surround channel satellite speakers symmetrically and behind the listening position. The satellites may be placed on a bookshelf, desk or table. If rear positioning is impossible, place the speakers as far back, to the left and right, as possible. Avoid putting the speakers on the floor as this impairs the rear sound field and doesnt provide a seamless sense of surround ambience. If no other rear placement option is available, the pedestal stands may be removed by unscrewing the threaded bolt to allow the rear speakers to be wall mounted. This 1/4 20- thread bolt pattern was chosen to accommodate a wide variety of wall brackets available at stereo and appliance stores nationwide. (Klipsch WB- 1 wall brackets are available for purchase at .) 4.Locate the subwoofer either directly under your computer desk, or close to the front satellite speakers, allowing access to the AC outlet and soundcard connections. The subwoofers proximity to a wall or the floor will greatly enhance the low frequency content of the system. It is important not to cover up the side speakers or front vent port of the enclosure. Also, be sure to provide enough ventilation to the rear of the subwoofer, as the amplifier resides inside its enclosure. The subwoofer should be no closer than 10 to the computer monitor to avoid interference. 5.Position the speakers with safe routing of the interconnection cables in mind. Speaker or power cables, which might be run across an area of foot traffic, should be positioned against a wall or corner and taped down. Special cable troughs are available from stereo, appliance and computer stores to assist in covering cables, which may fall underfoot or across walkways. The front and center speaker interconnects are four meters in length. The rear speaker interconnects are six meters in length. SIGNAL CONNECTION FIVE- CHANNELDISCRETE CHANNELCONNECTION (5.1 SOUNDCARD) 1. The stereo mini- plug cables send the proper front, center, subwoofer and rear (surround) signals to the amplifier housed in the subwoofer. Plug the cables into the jacks marked INPUTS on the ProMedia 5.1s subwoofer panel. Use the GREEN plug in the FRONT L/R jack, the BLACK plug in the REAR L/R jack and the ORANGE plug in the CENTER/SUB jack. Route the other end of these cables into the 2- , 4- , or 5.1- channel soundcard output jacks on the rear of your PC. Connect the GREEN plug to soundcard output number one for the front signals, the BLACK plug to output number two for the rear (surround) channels, and the ORANGE plug for center and subwoofer signals. This will ensure that all channel signals are positioned and routed properly. NOTE: If you have a two- channel soundcard, do not connect the BLACK or ORANGE signal cables to the amplifier panel. If you are using a four- channel soundcard, do not connect the ORANGE signal cable to the amplifier panel. Since the unused channels will not amplify any signals, you dont need to connect the center speaker, or for a two- channel soundcard, the rear speakers. 2. Connect the control tower cable, which has the round DIN multi- pin plug, into the ProMedia 5.1 subwoofer panel connector marked VOLUME CONTROL. Ensure that the flat side of the plug is facing up. 3. One of the six amplifier channels powers the subwoofer itself, while the other five amplifier sections feed the satellite and center speakers through their own speaker cables. From the subwoofer amplifier panel, connect the five satellite interconnects (including the center channel) to each of the five speakers. The front and center satellite speaker interconnects are four meters long, and the rear satellite speaker interconnects are six meters long. The wire ends attach to the amplifier and satellite speakers to allow for speaker wire upgrades if desired. Be sure to observe the polarity (+/- ) settings at each tinned wire end for connection. To ensure proper bass response and aural imaging, it is VERY IMPORTANT that all of the positive terminals are connected in proper polarity. In other words, avoid having the positive (+) bare lead from a satellite speaker connected to the negative (- ) terminal on the subwoofer enclosure. Route the speaker cables safely, to avoid a tripping danger. SPEAKER CONNECTION 1. Connect mini plugs into PC soundcard from the subwoofer amplifier rear panel. 2. Connect DIN plug to the subwoofer from the control tower module. 3. Connect four satellites and center channel by inserting the tinned wire leads into the speaker cabinet terminals and the subwoofer panel, making sure only the bare wire leads are connected. 4. Connect the AC power cable to the AC power receptacle on the subwoofer amplifier panel. Do not plug in the AC power until your computer audio system is set up. Once system is properly set up and plugged in, start up the computer, then press the Control Tower power switch to turn the ProMedia 5.1 system on. 5. Plug headphone mini stereo plug in headphone jack, if desired. 6. Plug stereo mini plug into MP3/Aux jack, if desired. Plug stereo mini plug into MP3 player (as an example). S O F T WARE AND HARDWARE GAIN CONTROLS SOFTWARE VOLUME CONTROLS IN MICROSOFTWINDOWS 1. Click Start on your taskbar, go to Programs 2. Choose Accessories 3. Windows 95: Choose Multimedia, Windows 98/2000: Choose Entertainment 4. Click on the Volume Control 5. Adjust the Wave, CD and Main Volume Elevator Button to 75% VOLUME CONTROLPROGRAMS Some soundcard and/or PC manufacturers may have software that must be adjusted separately from the Windows volume control. Consult applicable manual for specific hardware documentation. FRONT/CENTER/SURROUND BALANCE Using a pre- recorded 5.1 channel voice/test signal provided with a 5.1 channel card, advance the Control Tower Main Volume knob to the indication 50 to initiate level balancing. Adjust the Center and Surround level until the voice appears equally loud in the front, center and rear channels. SUBWOOFER LEVEL For CD or DVD output, the optimal sub level is referenced at the factory to the 0 level posit