DBX 260_Firmware_Update_Procedure电路图.pdf

dbx DriveRack 260 Firmware Update Procedure If you are using a USB to Serial adapter it is recommended that you ensure proper connection before performing the update. We recommend installing the version of DriveWare that came with your device. Once a connection has been confirmed, uninstall DriveWare then continue with the below steps. Go here for more information on these USB to Serial converters. Go here for information on troubleshooting your USB to Serial Converter. 1. Go to the dbx downloads page: 2. Download the latest 260 Updater. 3. Download DriveWare if you intend to use it in conjunction with the 260 (it is recommend to use the latest version of DriveWare in conjunction with the latest version of the 260 firmware). 4. Install the Firmware Updater. To install the updater: Click on the downloaded EXE file. Read contents then, Click Next. RadioFans.CN 收音机爱 好者资料库 Read contents then, Click Next Make sure that “Desktop Shortcuts” is checked. Press Next. RadioFans.CN 收音机爱 好者资料库 If you would like to select a different location for installation, do so here. If you are unsure, leave the settings as they are. Click Install. Leave these items checked. Click Finish. RadioFans.CN 收音机爱 好者资料库 Read contents of document. Installation is now complete. 5. Power cycle the 260 while holding the PREV PG button. The display will read “WAITING FOR FLASH DOWNLOAD”. 6. Next, select the proper COM port then click “CONNECT”. 7.The status should now read “Online” and the device will now be displayed. If “Offline” is still displayed double check the COM port connection and RS232 cable. When “Online” is displayed, click “Update” to begin the procedure. After the firmware update procedure completes, follow the prompts on the 260 display. You will now need to install DriveWare if you wish to use it in conjunction with the 260. The installation procedure for DriveWare is very similar to the installation procedure for the Updater.