Symetrix 531E_532E_ds 电路图.pdf

Symetrix Inc. Mountlake Terrace, WA, USA Tel (425)778-7728 Fax (425)778-7727 +12 0 16K10K 12.5K20K -12 +12 16K12.5K10K20K -12 16K12.5K10K20K 0 8K5K4K6.3K3.15K2K2.5K1.25K8001K5004003156301.6K 4K8K6.3K5K3.15K2K2.5K 4K8K6.3K5K3.15K2K2.5K 1.25K1K800500400315630 1.25K1K800500400315630 1.6K 1.6K 2502001601006380125402531.520 0 CH118K HIGH CUT MODE 50 2501602001006380125 2502001601006380125 402531.5 BYPASS 12dB 3K65K 18K HIGH CUT CH2 20 402531.5 12dB BYPASS 42K 3K65K MODE 20 0 50 50 42K 2250 LOW CUT U INPUT CLIP CH1 LEVEL 115 6260 8 +15 LOW CUT U INPUT 0dB -20dB E CH2 LEVEL 115 5K 6260 8 +15 10dB -20dB 0dB POWER 2250 CLIP EQUALIZER GRAPHIC 532 5K10dB CH1 CUT FILTERS CH2 CUT FILTERS +6 -6 +6 -6 6dB 6dB APPLICATIONS Sound Reinforcement Installed Sound Systems 531E and 532E Graphic Equalizers EGARDLESS OF THE SIZE OF YOUR SOUND SYSTEM, good equalization is vital to its performance. That is why we developed the 531E and 532E Graphic Equalizers - as high quality alternatives to the mediocre “affordable” equalizers available today. FEATURES Proprietary topology delivers extremely low noise and distortion 31 constant Q bands High cut and low cut filters Servo balanced output (eliminates DC offset) Direct coupled inputs and outputs (superb low frequency response) Internal power supply with detachable cord In fact, the 531E and 532E are a purists dream - audiophile sound quality, an uncluttered control surface, and rugged reliability in one package. They offer thirty-one filter bands per channel on ISO 1/3rd-octave centers. Through the use of a global range switch, each band delivers either +/- 6dB or +/- 12dB of cut or boost. The grounded center detent position on each band serves as an on/off switch that completely removes that band from the audio signal path. In addition, they sport 12dB per octave High Cut and Low Cut filters. Each has a sweepable cutoff frequency and a control range that extends well into the sub/ultrasonic. Of course, the features and controls are secondary to the all-important question: How does it sound? Our design team believes that no one should have to settle for “good enough”, so they threw out all the conventional circuit designs and started from scratch. The result: a highly advanced filter topology that delivers extremely low distortion and noise, even at very high signal levels. Consider the following facts. Our proprietary filter technol- ogy delivers an extremely low noise floor, ultra-accurate summing, and minimal ringing and phase shift. The total harmonic distortion is less than 0.002%. Translation: the 531E and 532E are clean, clear, and musical-sounding. To ensure the highest level of performance, we build the 531E/32E to touring standards. Double sided, glass epoxy circuit boards; metal shaft, plastic film slide potentiometers; gold- plated XLR connectors, and a heavy duty all- steel chassis deliver rugged reliability. You dont have to treat these EQs with kid gloves. The details are worth noting, too. High- contrast front panel graphics make your control settings easy-to-read - even in a darkened concert hall. Servo-balanced outputs remove all DC offset voltage from the output. This eliminates the need for DC blocking capacitors in the signal path while improving noise, distortion, and low-frequency perfor- mance. Of course, both units incorporate a high current, internal power supply with an IEC-type detachable power cord. Whether you are a professional concert sound engineer, system designer, or musician, contact your nearest Symetrix dealer today. Discover for yourself why the 531E and 532E are the right choice for any professional sound reinforcement application. R 532E 531E/ EQUALIZER GRAPHIC +12 +6 20K16K12.5K10K 0 -6 -12 16K20K10K12.5K 8K6.3K5K4K3.15K2K2.5K1.25K8001K6305004003151.6K 6.3K8K4K5K3.15K2K2.5K1.25K8001K5003154006301.6K 2501602001006380125402531.520 +12 +6 50 2001602501006380125 18K HIGH CUT 12dB BYPASS 42K 3K65K MODE0 402531.5 -6 -12 2050 22 LOW CUT 50 U INPUT 5K 115 6260 8 - +15 CLIPE 10dB 0dB POWER -20dB LEVEL 531 CUT FILTERS +6 +3 -3 -6 +6 +3 6dB -3 -6 RadioFans.CN 收音机爱 好者资料库 Publication 1997 Symetrix, Inc. Symetrix Inc. Mountlake Terrace, WA, USA Tel (425)778-7728 Fax (425)778-7727 531E and 532E Graphic Equalizers SPECIFICATIONS Input/Output Number of Audio Channels531E: One, 532E: Two Maximum Input Level+21 dBu Balanced Maximum Output Level+21 dBu Balanced, +17 dBu Unbalanced Input Impedance10k Ohms Balanced, 5k Ohms Unbalanced Output Impedance400 Ohms Balanced, 200 Ohms Unbalanced Performance Data Frequency Response10 Hz - 38 kHz (+0 dB, -1 dB) Dynamic Range112 dB Signal to Noise Ratio94 dB (unweighted, ref to +4 dBu, eq in, all bands flat) THD+Noise (1 kHz - +4 dBu)<0.002% (10 Hz to 30 kHz measured bw, eq in, all bands flat) Graphic EQ Controls Frequency Control Range20 Hz - 20 kHz (31 bands, ISO 1/3rd octave centers) Cut/Boost Range 12 dB (Mode switch up), 6 dB (Mode switch down) Cut Filters Low Cut Filter Slope12 dB/octave Cutoff Frequency Range6 Hz - 260 Hz High Cut Filter Slope12 dB/octave Cutoff Frequency Range3 kHz - 65 kHz Physical Size (hwd)3.47 x 19 x 8.25 inches, 8.81 x 48.26 x 20.955 centimeters Shipping Weight11 lbs (5kg) Electrical Power requirements117V nominal, 105 to 130V AC, 50 to 60 Hz 230V nominal, 207 to 253V AC, 50 Hz Power Consumption531E: 10 watts max., 532E: 20 watts max. Specifications subject to change without notice. 10 WATTS TIP RING SLEEVE INPUT UNBALANCED BALANCED/ BALANCED OUTPUT 2 3 1 BALANCED/ UNBALANCED INPUTBALANCED 21 3 TIP = HIGH(+) = PIN 2 RING = LOW(-) = PIN 3 SLEEVE = GND = PIN 1 TYPICAL BALANCED CONNECTIONS OUTPUT CAUTION NE PAS OUVRIR TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK DO NOT EXPOSE THIS EQUIPMENT TO RAIN OR MOISTURE RISQUE DE CHOC ELECTRIQUE Il ne se trouve a linterieur aucune piece pourvant entre repare lusager. SEE OWNERS MANUAL. VOIR CAHIER DINSTRUCTIONS. Sadresser a un reparateur comptent. AVIS: WARNING: No user serviceable parts inside. Refer servicing to qualified service personnel. E531 MAXIMUM AC INPUT FABRIQU AUX E.-U. PAR SYMETRIX INC., LYNNWOOD, WASHINGTON. RFREZ TOUTE RPARATION UN TECHNICIEN QUALIFI. GRAPHIC EQUALIZER MANUFACTURED IN LYNNWOOD, WA, USA DO NOT OPEN RISK OF ELECTRIC SHOCK CH1 INPUT BALANCED/ UNBALANCED BALANCED CH2 INPUT UNBALANCED BALANCED/ BALANCED CH1 OUTPUT BALANCED UNBALANCED BALANCED/ CH2 OUTPUT 2 3 1 BALANCED/ UNBALANCED BALANCEDINPUT 21 3 RING SLEEVE TIP = HIGH(+) = PIN 2 RING = LOW(-) = PIN 3 SLEEVE = GND = PIN 1 TIP OUTPUT TYPICAL BALANCED CONNECTIONS CAUTION NE PAS OUVRIR TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK DO NOT EXPOSE THIS EQUIPMENT TO RAIN OR MOISTURE RISQUE DE CHOC ELECTRIQUE Il ne se trouve a linterieur aucune piece pourvant entre repare lusager. SEE OWNERS MANUAL. VOIR CAHIER DINSTRUCTIONS. Sadresser a un reparateur comptent. AVIS: WARNING: No user serviceable parts inside. Refer servicing to qualified service personnel. E532 20 WATTS MAXIMUM AC INPUT GRAPHIC EQUALIZER MANUFACTURED IN LYNNWOOD, WA, USA FABRIQU AUX E.-U. PAR SYMETRIX INC., LYNNWOOD, WASHINGTON. RFREZ TOUTE RPARATION UN TECHNICIEN QUALIFI. DO NOT OPEN RISK OF ELECTRIC SHOCK 532E 531E/ 531E and 532E ARCHITECTS AND ENGINEERS SPECIFICATIONS 531E Graphic Equalizer: The Graphic Equalizer (EQ) shall be a single channel unit that shall provide 31 filter bands, on ISO 1/3rd - octave centers. The lowest band shall be centered on 20Hz, the highest on 20kHz. There shall be a front panel mode switch which selects the cut/ boost range of the EQ band faders, and acts as a bypass. The EQ band controls shall be 60mm metal shaft faders. There shall also be separate, sweepable- frequency high-pass and low-pass filters. The unit shall occupy two rack spaces (2U). The high-pass filter shall have a 12dB/ octave slope with a user-adjustable cutoff frequency range of 6Hz to 260 Hz. The low-pass filter shall also have a 12dB/oct slope with a user-adjustable cutoff frequency range of 3kHz to 65 kHz. A front panel input level control shall provide - (infinity)dB to +15dB of gain adjustment. When the unit is rendered inoperative by loss of power, the inputs and outputs will be wired together by a fail-safe bypass relay. The frequency response with all filter bands flat, EQ in, and high-pass and low-pass set to the outside extremes of their ranges, shall be 10Hz to 38kHz (+0dB, -1dB). The total harmonic distortion plus noise shall be less than 0.002% (10Hz - 30kHz, EQ in, all bands flat). The dynamic range shall be greater than 112 dB. The EQ shall accept a maximum input signal of +21 dBu and have a maximum output level of +21 dBu. There shall be a four-segment, LED level meter. The inputs shall be direct-coupled, active balanced designs terminated with 3-pin XLR (AES/IEC standard wiring) and TRS. The input circuitry shall incorporate RFI filters. There shall be a servo- balanced, direct-coupled output that shall terminate in 3-pin XLR (AES/IEC standard wiring) and TRS. The EQ shall be capable of operating by means of its built-in power supply connected to 117V nominal AC, 105-130V, 50-60 Hz (230V nominal AC, 207-253V, 50 Hz where applicable). Power consumption shall be 10 watts maximum. There shall be a rear panel receptacle for an IEC-type detachable power cord. The EQ shall be UL and CE approved. The unit shall be a Symetrix Incorporated model 531E Graphic Equalizer. 532E Graphic Equalizer: The Graphic Equalizer (EQ) shall be a dual channel unit that provides 31 filter bands per channel, on ISO 1/3rd octave centers. The lowest band shall be centered on 20Hz, the highest on 20kHz. There shall be a front panel mode switch which selects the cut/ boost range of the eq band faders, and acts as a bypass. The eq band controls shall be 20mm metal shaft faders. There shall also be separate, sweepable- frequency high-pass and low-pass filters on each channel. The unit shall occupy two rack spaces (2U). The high-pass filter shall have a 12dB/ octave slope with a user-adjustable cutoff frequency range of 6Hz to 260 Hz, The low-pass filter shall also have a 12dB/oct slope with a user-adjustable cutoff frequency range from 3kHz to 65 kHz. A front panel input level control shall provide - (infinity)dB to +15dB of gain adjustment. When the unit is rendered inoperative by loss of power, the inputs and outputs will be wired together by a fail-safe bypass relay. The frequency response with all filter bands flat, EQ in, high-pass and low-pass set to the outside extremes of their ranges, shall be 10Hz to 38kHz (+0dB, -1dB). The total harmonic distortion plus noise shall be less than 0.002% (10Hz - 30kHz, EQ in, all bands flat). The dynamic range shall be greater than 112 dB. The EQ shall accept a maximum input signal of +21 dBu and have a maximum output level of +21 dBu. There shall be a four-segment LED level meter. The inputs shall be direct-coupled, active balanced designs terminated with 3-pin XLR (AES/IEC standard wiring), and TRS. The input circuitry shall incorporate RFI filters. There shall be a servo- balanced, direct-coupled output that shall terminate in 3-pin XLR (AES/IEC standard wiring) and TRS. The EQ shall be capable of operating by means of its built-in power supply connected to 117V nominal AC, 105-130V, 50-60 Hz (230V nominal AC, 207-253V, 50 Hz where applicable). Power consumption shall be 20 watts maximum. There shall be a rear panel receptacle for an IEC-type detachable power cord. The EQ shall be UL and CE approved. The unit shall be a Symetrix Incorporated model 532E Graphic Equalizer. RadioFans.CN 收音机爱 好者资料库