Tascam 2488MKII Manual 电路图.pdf

2488MK# Digital Portastudio D00951210A OWNERS MANUAL RadioFans.CN 收音机爱 好者资料库 IMPORTANT SAFETY PRECAUTIONS TASCAM 2488MKII The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance. The lightning flash with arrowhead symbol, within equilateral triangle, is intended to alert the user to the presence of uninsulated “dangerous voltage” within the products enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. WARNING: TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. This appliance has a serial number located on the rear panel. Please record the model number and serial number and retain them for your records. Model number Serial number TO THE USER This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures. a) Reorient or relocate the receiving antenna. b) Increase the separation between the equipment and receiver. c) Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. d) Consult the dealer or an experienced radio/TV technician for help. CAUTION Changes or modifications to this equipment not expressly approved by TEAC CORPORATION for compliance could void the users authority to operate this equipment. For U.S.A. RadioFans.CN 收音机爱 好者资料库 IMPORTANT SAFETY INSTRUCTIONS TASCAM 2488MKII 1 Read these instructions. 2 Keep these instructions. 3 Heed all warnings. 4 Follow all instructions. 5 Do not use this apparatus near water. 6 Clean only with dry cloth. 7 Do not block any ventilation openings. Install in accordance with the manufacturers instructions. 8 Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat. 9 Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet. 10 Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus. 11 Only use attachments/accessories specified by the manufacturer. 12 Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over. 13 Unplug this apparatus during lightning storms or when unused for long periods of time. 14 Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped. Do not expose this apparatus to drips or splashes. Do not place any objects filled with liquids, such as vases, on the apparatus. Do not install this apparatus in a confined space such as a book case or similar unit. The apparatus draws nominal non-operating power from the AC outlet with its POWER switch in the off position. The apparatus should be located close enough to the AC outlet so that you can easily grasp the power cord plug at any time. An apparatus with Class I construction shall be connected to an AC outlet with a protective grounding connection. Batteries (battery pack or batteries installed) should not be exposed to excessive heat such as sunshine, fire or the like. RadioFans.CN 收音机爱 好者资料库 TASCAM 2488MKII This product has been designed and manufactured according to FDA regulations “title 21, CFR, chapter 1, subchapter J, based on the Radiation Control for Health and Safety Act of 1968, ” and is classified as a class 1 laser product. There is no hazardous invis- ible laser radiation during operation because invisible laser radiation emitted inside of this product is com- pletely confined in the protective housings. The label required in this regulation is shown at 1. Optical pickup: Type: SF-W37S Manufacturer: SANYO Laser output: 1.5 mW (Read), 74 mW (White) Wavelength: 783 nm CAUTION DO NOT REMOVE THE PROTECTIVE HOUSING USING A SCREWDRIVER. USE OF CONTROLS OR ADJUSTMENTS OR PERFORMANCE OF PROCEDURES OTHER THAN THOSE SPECIFIED HEREIN MAY RESULT IN HAZARDOUS RADIATION EXPOSURE. IF THIS PRODUCT DEVELOPS TROUBLE, CONTACT YOUR NEAREST QUALIFIED SERVICE PERSONNEL, AND DO NOT USE THE PRODUCT IN ITS DAMAGED STATE. Safety Information 1 For USA 1 Introductions . 8 Supplied accessories .8 Use with a personal computer .8 About this Users Manual .9 Manual conventions .9 Precautions and notes for placement and use .10 Handling of compact discs .10 Beware of condensation .10 Never use a stabilizer or printable discs .10 About CD-R and CD-RW discs .11 About finalizing .11 2 Setting up and basic knowledge . 12 Setting up the 2488MKII .12 Shutdown .13 Basic knowledge.13 Hard disk and partitions .13 Selecting the active partition .13 Songs .14 Screen .14 Menu screen .14 Home screen .14 Direct access screens .15 Some general notes on using the 2488MKII .15 Navigation .15 YES/ENTER key .15 NO/EXIT key .15 Changing values .15 Titling .15 SHIFT key .16 3 Names and functions of the 2488MKII. 17 Top panel.17 Input channel section .17 Effects section .18 Track mixer section .18 Sub mixer section .18 Stereo Bus section .18 Monitor Section .19 LCD display section .19 Access indicator section .19 Utility section .19 Screen operation section .19 Channel section .20 Locate section .20 Mark/Title section .20 Transport section .21 Transport keys .21 Mixdown section .21 Routing section .22 Other keys .22 Front panel .22 Rear panel .23 4 Recording . 24 Setting up your first song .24 New song .24 Setting the tempo .25 Making the first recording .26 Recording the guitar .26 Lead line .28 5 Mixer . 29 Inputs and assignments .29 Assignment to a stereo track . 29 Digital input assignment .29 Checking assignments .30 Breaking assignments .30 Saving and loading assignments (QUICK ROUTING) .30 Channel functions .31 Track channels and input channels .31 EQ.31 Digital pad/gain .31 EQ .31 Effect send .32 Fader/pan .32 Phase . 32 Pan . 32 Faders . 32 Mute .33 Linking channels .33 Stereo bus functions .33 Stereo EQ .33 Stereo dynamics .34 Stereo fader .34 Direct output .35 Sub mixer .35 Monitoring .36 Monitor selection .36 Mono monitoring .36 Record source monitoring .36 Monitor muting .36 Soloing and toggle .37 Scene memories .37 Scene recall .37 Internal faders and physical faders .37 Fader matching .37 Saving scenes .38 Matching the physical faders with internal fader values . 38 6 Effects . 39 Settings insert effect modes .39 Mic effects .39 TASCAM 2488MKII Contents Assigning mic effects .39 Selecting mic effects .40 Editing mic effects .40 Multi-effect.41 Assigning the multi-effect .41 Editing the multi-effect .41 Using the multi-effect library .41 Saving multi-effect settings .42 Single effect .42 Saving single effects .42 Tuner.43 7 Recorder . 44 First steps in recording (song management) .44 Creating a song .44 Loading a song .44 Saving a song .45 Reverting to the previously saved version of a song .45 Erasing a song .45 Copying songs .46 Erasing unneeded audio data from songs .46 Protecting a song .47 Transport controls .47 Setting the playback position .47 Return to zero (RTZ) .47 Last Recording Position (LRP) .47 Jog positioning .48 Fast forward and rewind .49 Skipping to marks.49 Recording .49 PUNCH recording .49 Hands-free recording .50 Undo recordings .50 Rehearsing recording .50 IN, OUT, TO and FROM points .50 Setting the IN, OUT, TO and FROM points .50 Locating to the points .50 Editing the IN, OUT, TO and FROM points .51 Mark functions .51 Inserting marks .51 Active marks .51 Giving a title to the active mark .51 Deleting the active mark .51 Editing the active mark .52 Skip between marks .52 Using the mark list .53 Locating using the list .53 Titling using the list . 53 Erasing marks using the list .53 Direct location .54 Direct location (i) .54 Direc