Rauland 1341 Power Supply Adapter 电路图.pdf

Installation KI-1358B 1341 Power Supply Adapter Module Rauland-Borg Corporation Issued: 07/16/98 Page 1 of 8 RadioFans.CN 收音机爱 好者资料库 Copyright 1998 by Rauland-Borg Corporation, all rights reserved. This document contains users information on technology that is proprietary to Rauland-Borg Corporation. Permitted transmittal, receipt, or possession of this document does not express license or imply any rights to use, sell, design or manufacture this information. No reproduction, publication, or disclosure of this information, in whole or in part, shall be made without prior written authorization from an officer of Rauland-Borg Corporation. Rauland-Borg Corporation Rauland-Borg Corporation 3450 West Oakton Street Skokie, Illinois 60076-2958 (847) 679-0900 RadioFans.CN 收音机爱 好者资料库 KI-1358B Power Supply Adapter ModuleInstallation Table of Contents GENERAL INFORMATION. 4 REVISION HISTORY. 4 ALERTS, PRECAUTIONS, AND LIMITATIONS. 4 RELATED DOCUMENTS. 5 DRAWINGS, DIAGRAMS, AND OTHER GRAPHICS. 5 INSTALLATION. 6 ELECTRICAL INSTALLATION. 6 PSL25 Power Supply. 6 MECHANICAL INSTALLATION. 7 WIRING DIAGRAMS. 8 KI-1358B Power Supply Adapter ModuleInstallation Page 4 of 8 (Jul-98) General Information This module is an intermediate stage, electrically positioned between a DC power supply and associated control and room-selector panels in a Rauland communications system. It requires an external model PS91 DC Power Supply, which must be ordered separately. ? Important: The 1341 Power Supply Adapter Module is only required when the 1340 Priority Module is used with the MCC300 or MCZ300 Control Panels. The Adapter Module contains voltage-regulator circuitry to light the LEDs on the associated SWT425 Room Selector Panel. It also contains circuitry to sense LED current on the SWT425 and activate (trigger-pulse) a call-in tone in the MCC300 or MCZ300 Control Panels. Revision History This manual has been reformatted. No substantial changes were made during the reformatting process. Alerts, Precautions, and Limitations ? Observe all polarities, lead color codes, and schematic and wiring diagram reference designations when making electrical connections 1 KI-1358B Power Supply Adapter ModuleInstallation Page 5 of 8 (Jul-98) Related Documents Other related information can be found in the following manuals: ? KI-1606 Telephone Control Panel Installation ? KI-1357 Priority Module Installation and Operation ? KI-1243 SWT425 Installation Drawings, Diagrams, and Other Graphics This document includes the following drawings, diagrams, and/or supplemental graphics: ? KM-0630 ? KC-1428 KI-1358B Power Supply Adapter ModuleInstallation Page 6 of 8 (Jul-98) Installation The following section contains information regarding Wiring and Mechanical installation. Electrical Installation Consult wiring diagrams KC1428 and KM0630 at the end of this manual for electrical connections. ? Important: Do not jumper the “L” and “K” leads of the SWT425 to the “L” and “K” leads of the SWL425 when both types of Switch Panels are used in the same system. Each type of Room Selector Panel requires a specified Power Supply to operate the annunciator LEDs. The PSL25 supplies power to the SWL425, and the 1341 Power Supply Adapter supplies power to the SWT425. PSL25 Power Supply The PSL25 Power Supply is only used when the SWL425 Room Selector Panel (providing visual annunciation of call-ins) is used for rooms without Priority Modules. It is separate and independent of other power supplies. One PSL25 Power Supply would accommodate a system using SWL425 Room Selectors. The Power Supply plugs into a 120V AC, 60Hz receptacle. Ensure that the power supplys DC output is connector to the SWL425 as follows: ? Positive (+) DC voltage to the L terminal ? Negative (-) DC voltage to the K terminal 2 KI-1358B Power Supply Adapter ModuleInstallation Page 7 of 8 (Jul-98) Mechanical Installation Use double-sided adhesive foam tape to mount the Power Supply Adapter Module on a flat surface inside a rack or turret. KI-1358B Power Supply Adapter ModuleInstallation Page 8 of 8 (Jul-98) Wiring Diagrams Consult the Wiring and Schematic diagrams, KC-1428 and KM-0630, on the following pages prior to installation. A