Rauland Telecenter V - Diagnostic Program Ki-1730D 电路图.pdf

Installation - KI-1730D Telecenter” V Diagnostic Program Version 16 Rauland-Borg Corporation Orig. 1 l/92. Rev. 7/94, 10/94,3/95,12/95 173004 Page 1 of 40 RadioFans.CN 收音机爱 好者资料库 Telecenter V Diagnostic Program a Copyright 1992, 1994, 1995, Rauland-Borg Corporation, all rights reserved. This document contains user s information on technology that is proprietary to Rauland- Borg Corporation. Permitted transmittal, receipt, or possession of this document does not express license or imply any rights to use, sell, design or manufacture this information. No reproduction, publication or disclosure of this information, in whole or in part, shall be made without prior written authorization from an officer of Rauland- Borg Corporation. ORauland-Borg Corporation Printed in USA Rauland-Borg Corporation Rauland-Borg (Canada) Inc. 3450 West Oakton Street 6535 Millcreek Drive, Unit 5 Skokie, Illinois 60076-295 1 Mississauga, Ontario, Canada L5N 2M2 (847) 679-0900 (905) 821-2225 Page 2 3/l 6/95 RadioFans.CN 收音机爱 好者资料库 Telecenter” V Diagnostic Program Table of Contents General Information 1 . 5 Description. . 5 License for Use. . 5 PC Requirements. . 6 Getting Started 2 . 7 Backup Copy . 7 Hard Disk Installation . 7 Connecting to the Telecenter V System. . 8 Running the TD5 Program 3 . .9 Establishing a Direct Connection . 10 Connecting with a Modem. . 10 Exiting the TD5 Program . 1 1 Terminal Mode 4 . 13 Terminal Mode Command Descriptions. . 13 Fl - Editor Selection . 13 F2 - Diagnostics. . 13 F3 - Change Baud/Port. . 13 F4 - Date/Time Functions. . 14 F5 - Phone Dialer. . 14 F6 - Printer On/Off . 14 F7 - View Text File . 14 F8 - Edit Text File. . 14 F9 - File Transfers . 14 F 10 - Redraw. . 14 Esc - Exit . 14 ? - Help . 14 Editor Selection 5 . 15 Common Commands. . 16 F2 - External Program. . 16 F4 - Block Status . 16 F6 - Load from Disk . 16 F7 - Save to Disk. . 16 F8 - Capture Data from TC5 . 17 F9 - Send Data to TC5 . 17 F 10 - Print . 1 7 Alt-F 1 - Select System Block . 1 7 3/l 6/95 Page 3 Telecenter B V Diagnostic Program Ah-A - Architectural Editor . 18 F3 - Block Program. . 19 F5 - Copy Previous. . 19 Alt-C - Class of Service Editor. . .2Q Alt-E - Time Based Events Editor. . .20 Alt-F - Call Forwarding Editor . 21 Alt-l - PIN Code Editor. . .21 F3 - Dialed Digits. . 22 Alt-L - Location Code Editor . 22 Alt-M - Intercept Table Editor. . .23 Entries. . 24 Alt-P - Call-in Prefix Editor. . .25 Alt-S - Student Phone Editor. . .26 Alt-T - Toll Prefix Editor. . .26 Alt-V - VCM Assignment Editor. . .27 Alt-X - Page Exclusion Editor . .27 Diagnostics 6 . 29 Dump Active List. . .29 I/O Diagnostic. . .30 Read Statistics . .32 Logging . .33 Appendix A . .35 Voltage . 36 F5 Phone Dialer . .36 Preliminary Tests . .37 Appendix B . .39 TD5 Command Line Arguments . .39 Monitor Comrnands. . .39 Miscellaneous CPU Monitor Commands . 40 Page 4 3.!16195 Telecente? V Diagnostic Program General Information 1 Description The Telecenter Diagnostic Disk (TD5) is a configuration and diagnostic program used with the Telecenter V system. A PC based program, the TDS communicates with the Telecenter V system through a serial connection. This connection can be either a cable which directly connects the PC to the Telecenter V system, or through a pair of modems that are connected to the system. The TD5 program enables a user to: J Edit configuration files on disk that are then downloaded to the Telecenter V system. J Retrieve the memory contents from a Telecenter V system for editing, diagnostics, and archival. J Monitor system activity and acquires statistics maintained by the system. J Remotely analyze system performance. J Access system features for activation changes and troubleshooting. License for Use The TD5 software and this manual are copyrighted by the Rauland-Borg Corporation, Skokie IL 60076. With the purchase and use of this software comes the following license for use: ? The software may only be used to support Telecenter V systems. Using or copying the software for any other purpose is a violation of Rauland-Borg s copyright. ? The software is to be used as described in this manual or as authorized by an Rauland-Borg employee. Any other application of the software is a violation of Rauland-Borg s copyright. ? The software and supporting files can be copied from the purchased diskette to any hard disk or other diskettes for supporting Telecenter V systems or for backup. No restrictions apply to the number of copies created from the purchased diskette for the purposes stated. ? This manual can be reproduced as needed for supporting Telecenter V systems. Distributing this manual for any other purpose is a violation of Rauland-Borg s copyright. 3/l 6/95 Page 5 Telecenter V Diagnostic Program PC Requirements The TD5 helps maintain Telecenter V systems and the related configuration data. In providing this capability, the program requires a minimum of 550K of usable memory (RAM). Many of the data editors functions are extensive and take a certain amount of processor time. Naturally, the program may seem slow on some computers. The minimum recommended PC configuration that would be used extensively for Telecenter V configuration and diagnostics is as follows: ? 386SX desktop or laptop computer . I Meg memory (RAM) ? 20 Meg hard disk ? 3-l/2” low density diskette ? Standard COM port Although this is the minimum recommended configuration, the TD5 will run on a slower computer (including an IBM XT compatible) with 640K of memory and no hard disk. For emergencies, the software can be copied to 5-114” double density diskettes and used on computers without a 3-l /2” disk drive. Page 6 3116195 Telecente? V Diagnostic Program Getting Started 2 With the computer turned on and the TD5 software installed, prepare to program the system in one of the following ways: ? Copy the TD5 software to the hard disk of the computer. This provides faster start- up during subsequent sessions and should be done if the computer continues to support the Telecenter V system. ? Use the TD5 program from the diskette. This is applicable if the computer does not have a hard drive or the use of this computer is temporary. Backup Copy Before using the TD5 program, copy it to another diskette for a backup. It is recommended that the files are copied to a blank diskette and the original diskette is stored in a cool, dry place, separate from the working copy. To make a backup copy of the original program, use the DOS copy command. If the computer has two diskette drives: 1. Insert the purchased diskette into drive A: 2. Insert a blank diskette into drive B: copy u A: *.* B: 3. Use the DOS command “Copy” to copy the tiles from drive A: to drive B: 4. Remove and store the diskette in drive A: in a safe place. Use the diskette in drive B: as a working copy of the TD5 program. If the computer has only one drive or only one 3-l/2” drive, refer to the DOS manual for the commands that are needed to copy the files from the purchased diskette to a blank diskette. If using the hard disk, follow the Hard Disk Installation instructions for your computer to copy the files from the hard disk to a blank diskette. Hard Disk Installation md C:td5 To copy the TD5 program to a hard disk: 1. Put the TD5 diskette into the diskette drive. (Drive A: will be used as an example.) 2. Create a directory on the hard disk for the TD5 program. Use the adjacent command to create a directory called “td5” on hard disk C: (Drive C: will be used as an example). 3/I 6195 Page 7 Telecenter V Diagnostic Program copy A: *.* C:td5 3. Copy the files from the diskette to the td5 directory on the hard disk. PATH zPATtiz;c:TD5 4. If you wish, add the td5 directory to the DOS PATH. In the autoexec.bat file, add the adjacent line. This adds the td5 directory to the end of the DOS PATH. Older versions of DOS do not have this ability. Refer to the DOS manual for the synt