Qsc - Dsppower 电路图.pdf

DSP-3 Digital Signal Processor Hardware Manual Addendum IMPORTANT INFORMATION- PLEASE READ! QSCs DSP-3 Module has been designed to attach directly to the DataPort connector of QSCs CX, DCA, Powerlight, and Powerlight2 series amplifiers. When attached to CX, DCA, and PL2 amps, the module is supposed to receive its power through the DataPort from the amplifier. Modules connected to Powerlight amplifiers require an external DC supply (available from QSC). CX, DCA, and PL2 amps made prior to August 1999 DO NOT provide adequate power supply voltage to the module, requiring the use of the same type of external DC supply as used with Powerlight amplifiers. The amps in question will have a serial number PRIOR to 0899XXXXX, where the first four digits of the serial number are the MMYY datecode. Again, the modules WILL work with these amps just fine, but will require the use of our external power supply. QSC Audio Products, Inc. 1675 MacArthur Blvd. Costa Mesa, CA 92626 Telephone (Main): (714) 754-6175 FAX (Technical Services): (714) 754-6173 WEB: TD-000087-00 Rev.A Addendum 1 RadioFans.CN 收音机爱 好者资料库