Kenwood-DNX-4289-BT-Service-Manual(1) 电路图 维修手册.pdf

This product uses Lead Free solder. This product complies with the RoHS directive for the European market. PbF DNX4280BT/5180/5280BT /5380/5380M/5380BT /5580BT/6040EX/6180 /6480BT/6980 SERVICE MANUAL 2011-3 PRINTED IN JA PAN B53-0849-00 (N) 303 MONITOR WITH DVD RECEIVER NAVIGATION SYSTEM DC cord * (E30-6796-15) DC cord * (E30-6881-25) Screw set * (N99-1779-15) Lever * (D10-7012-04) x2 Remote controller assy * (A70-2107-05) Mounting hardware assy * (J22-0657-03) Escutcheon * (B07-3172-12) Size AAA battery (Not supplied) Escutcheon * (B07-3165-02) Illustrations is DNX5380M Adhesive double- coated tape * (H30-0595-04) * It uses it by some models. Refer to the parts list. Microphone * (W01-1768-15) (3m) RC-DV331 Accessories (Remocon cable) * (W01-2004-05) Carrying case * (W01-2010-05) Compact disc (W01-2005-05) Antenna module (GPS ANT) (W02-5304-05) Mounting hardware (GPS plate) (J22-0964-04) The IC261 in the ELECTRIC UNIT (X34-695x-xx) are not replaceable components. When these ICs are defective, replace the whole ELECTRIC UNIT (X34-695x-xx). The IC3 and IC100 in the VIDEO UNIT (X35-514x-xx) are not replaceable components. When these ICs are defective, replace the whole VIDEO UNIT (X35-514x-xx) . The IC103,402, 403, 500 and IC501 in the DIGITAL I/O UNIT (X88-2080-xx) are not replaceable components. When these ICs are defective, replace the whole DIGITAL I/O UNIT (X88-2080-xx). The IC5 in the DVD unit (X37-1300-00) are not replaceable components. When these ICs are defective, replace the whole DVD mechanism assembly (X92-6640-00). MODEL TDF PANEL No. TDF NAME DNX5280BT Y33-3452-70 TDF-N5280 DNX5380 Y33-3450-21 TDF-N5380 DNX5380M Y33-3450-21 TDF-N5380 DNX5380BT Y33-3450-71 TDF-N5380 DNX5580BT Y33-3453-81 TDF-N5580 TDF SPARE-PANEL RadioFans.CN 收音机爱 好者资料库 2 DNX4280BT/5180/5280BT/5380/5380M /5380BT/5580BT/6040EX/6180/6480BT/6980 BLOCK DIAGRAM (X15- ) (C/3)(X88-208) (X17- ) (A/2)(X17-213) (B/2) TOUCH PANEL LCD PANEL CPT WVGA (X35-514) (X16-706) (X16-716) (X15-154) (A/3) (X34-695) J401 J405 J400 MODULE GPS TV I/F J402 ANT J403 GPS POWER IC406 SEL VIDEO CN402CN400 DVD MECHA SYSTEM u-COM IC205 CN201 E2PROM (1k) IC204 AUDIO DAC IC405 IC404 ISO CN200 SLOT MICRO J1 DC CN102 CN596 J571 J302 J301 J501 J531 W201 ANT FM/AM AV IN POWER SUPPLY IC IC2 CAR I/F IC1 IC POWER 5V PRE (EXCELON) (ENTRY) 2V PRE TMC DECODER IC261 ANT DISTRIBUTOR IC301 E-VOL FM/AM A201 RDS DECODER IC231 AUDIO SEL IC401 IC714 VIDEO DECODER IC103 IC704 VIDEO DAC 128Mbit (x8) IC402 SDRAM IC403 2Gbit (x16) NAND FLASH IC706 IC705 IC707 CN408 MUTE SYSCOM REWRITE CN202 CN403 CN404 CN405 W700 CN200 J201 J200 J2 J1 CN1 CN700 CN702 FLASH SERISL IC402 u-COM PANEL IC202 IC406 for LED BACK LIGHT IC203 iPod CP IC3 POWER SD SLOT IN/OUT AV SLOT USB AUX VOL- VOL+ REMO IC900 CN401 BLUETOOTH REWRITE MASTER CN101 CN205 CN207 STE REMO MIC BT AUDIO DAC J406 DIGITAL MEDIA PROCESSOR 128Mbit (x8) SDRAM 128Mbit (x8) 128Mbit (x8) SDRAM IC501 SDRAM IC500 FAN KAB I/F PRE OUT PRE OUT iPod AV DSI LED MASTER CN600CN400 KEY SW KEY ILLUMI KEYVOL+ VOL-SWILLUMI KEY REMO IC920 CN920 F/E CN410 CN1CN700 J901 J900 SD J408 CN201CN2 50pin 14pinAV(50pin) R.CAM DVD OUTPUT iPod TV SOC AV IN REAR AVOUT X200 32.768kHz 12MHz X201 70pin40pin 50pin 14pin 70pin70pin CVBS RGB/YCbCr SYNC 8pin5pin 40pin70pin 2pin SPPRE MUX AC IN MUX ISO OUTPUT SEL INPUT SEL ISO 4.332MHz X231 X1 10.25MHz iPod TUNER KAB BT TV AV IN 32MHz X700 TELECHIPS CVBS 5pin USB HS 12MHz X100 SOC SYNC SOC R/G/B, DVD Y/Cr/Cb DVD USB/SD NAVI MAIN SUB OUTPUT 14pin AV OUT 70pin 70pin 70pin 12MHz 12MHz 4pin60pin10pin24pin CAMERA 24pin 24pin 27MHz X2 14pin 4pin 4pin 4pin 4pin 24pin 24pin24pin 24pin 12MHz 16.368MHz 14pin 50pin70pin LCD HS,LCD VS (R-CAMERA) FRONT SP L/R REAR SP L/R SPEED ILLUMI PARKING REMO REVERSE P-CON ANT-CON ACC BU SUB WOOFER FRONT L/R REAR L/R CENTER L/R X400 X200 RadioFans.CN 收音机爱 好者资料库 3 DNX4280BT/5180/5280BT/5380/5380M /5380BT/5580BT/6040EX/6180/6480BT/6980 BLOCK DIAGRAM U,V,W COIL HALL BIAS HALL SENSOR DVD LD/CD LD VREFH IMON/VR DVD/VR CD PDIC I/V OUT FO+/-,TR+/- THERMISTER FO5,RO5 P5V FO2,RO2 3 3 H1H,H1L,HB A1,A2,A3 P5V VHALF V5V 2 PLL3.3V A3.3V D1.2VD3.3V 27MHz NRST LIM-SW 4 VREF,EC FE1,FE2,RF A,B,C,D,E,F, 9 D3.3V D3.3V 6 2 D3.3V 2 LPC1/LPC2 VREFH 4 FO3,RO3 FO4,RO4 FO6,RO6 PDIC VCC,HFM SW EJEND V5V 4 VDOUT LXVIN TEMP(AD1) FG SPIN,IN2-6 STBY MUTE 2 VHALF 21 16 BA0-1,MA0-11,DQM0-1 MDQ0-15 NWE,NCAS,NRAS,NCSM,MCK0 FG,P5 PWM0,PWM1 DRV1,DRV2,DRV3,DRV4 DQM3,P12 TRCCLK,EXTRG1 16 DQ0-15 W, G, E A0-20 24 P3 EXADR16-19 NEXWE NEXCE P15(ADR20) NEXOE EXADT0-15 DRV5 P11 P6 P4 P14 V5V V3.3V V5V 3 SRCK,LRCK DAC4OUT DT,CK,CS DAC0-3OUT 5 3 IECOUT Pb/B Y/G Pr/R VIDEO SPDIF AMUTE P1,P2SDA,SCL A5V AOUTR IFSEL RESET EXADT0-15 ADOUT3 DACCK RSTN R L NC 2 2 LPC01/LPC02 RESET AOUTL SPINDLE MOTOR DISC OPTICAL PICKUP STEPPING 2 PHASE CN1 30pin 28pin CN3 MOTOR ” in the specifi c fi le placed in the USB memory. Background of the screen will be blue if all the items were not NG. Perform Reset or Power OFF/ON after the Version Check is completed. 2.3.14 End of the test mode Perform Reset when ending the test mode. (Test mode will continue by performing ACC OFF/ON or Power OFF/ON.) 2.3.15 Other Do not operate the Back Up Memory function during the Test mode. There are the following restrictions during the test mode. It will not switch to R-CAM video even if Reverse interrupt occurs while the test mode dedicated screen is display- ing. (There is no problem when displaying a screen other than the test mode dedicated screen.) It will not transfer to Screen adjustment screen when Ten- key 6 is pressed while displaying the test mode dedicated screen. (There is no problem when displaying a screen other than the test mode dedicated screen.) It will not transfer to Flicker adjustment screen when Ten- key 0 is pressed while displaying other than the test mode dedicated screen. (There is no problem when displaying the test mode dedicated screen.) TEST MODE 31 DNX4280BT/5180/5280BT/5380/5380M /5380BT/5580BT/6040EX/6180/6480BT/6980 Procedure to clear Security Code If the unit is started with the Security ON condition, use the following procedure to clear the Security Code (in the mode other than the Test Mode). 1) When the unit is Reset or is powered on after the backup OFF under the Security ON condition, the unit boots up from the Security Code Entry screen. 2) Select Audio SW mode on the remote controller, and manually enter the code following the next procedure: Step 1: Press Tenkey5 twice. Step 2: Press Tenkey2 three times. Step 3: Press Tenkey2 once. Step 4: Press Tenkey7 twice. HOW TO CLEAR SECURITY CODE When the entry is made improperly during the Steps 14, repeat the code entry from the Step 1 after entering other remote controller Key. When the Security Code Entry screen is cleared, the Secu- rity Code clear is completed. 32 DNX4280BT/5180/5280BT/5380/5380M /5380BT/5580BT/6040EX/6180/6480BT/6980 1. WB/DVD_WB/VIDEO_WB/AGC/HPOSI auto adjustment Input signal From signal generator COMPOSITE RCAM input NTSC White Raster 100% RCAM_SCREEN_MODE: FULL DVD_SCREEN_MODE: FULL * Default: FULL Adjustment 96 kHz .20 22,000 Hz 48 kHz .20 22,000 Hz 44.1 kHz .20 20,000 Hz Total Harmonic Distortion .0.010 % (1 kHz) S/N Ratio (dB) . 98 dB (DVD-Video 96 kHz) Dynamic Range . 98 dB (DVD-Video 96 kHz) Disc Format .DVD-Video/ VIDEO-CD/ CD-DA Sampling Frequency .44.1/48/96 kHz Quantifying Bit Number . 16/20/24 bit USB interface section USB Standard .USB 2.0 High speed File System .FAT 16/ 32 Maximum Power Supply Current . 1A (5V) D/A Converter . 24 Bit Video Decoder .MPEG1/MPEG2/MPEG4/WMV/H.264 Audio Decoder . MP3/ WMA/ AAC/ WAV (Linear PCM) Bluetooth section (Except DNX5180) Technology .Bluetooth 2.1 Certifi ed Frequency .2.402 2.480 GHz Output Power .+4dBm (MAX), 0dBm (AVE), Power Class2 Maximum Communication Range .Line of sight approx. 10m (32.8 ft) Profi le .HFP (Hands Free Profi le), SPP (Serial Port Profi le) HSP (Headset Profi le), OPP (Object Push Profi le) PBAP (Phonebook Access Profi le) SYNC (Synchronization Profi le) FM tuner section Frequency Range DNX6480BT .87.5 MHz 108.0 MHz (50 kHz) DNX6980, DNX6180, DNX6040EX, DNX5180 .87.9 MHz 107.9 MHz (200 kHz) Usable Sensitivity (S/N : 30 dB) .9.3 dBf (0.8 V/75 ) Quieting Sensitivity (S/N : 50 dB) .15.2 dBf (1.6 V/75 ) Frequency Response ( 3.0 dB) .30 Hz 15 kHz S/N Ratio (dB) .70 dB (MONO) Selectivity ( 400 kHz) . 80 dB Stereo Separation .40 dB (1 kHz) AM tuner section Frequency Range (10 kHz) .530 kHz 1700 kHz Usable Sensitivity .28 dB Video section Color System of External Video Input .NTSC/PAL External Video Input Level (RCA/mini jack) .1 Vp-p/ 75 External Audio Max Input Level (RCA/mini jack) .2 V/ 25 k Video Output Level (RCA jacks) .1 Vp-p/ 75 Audio Output Level (RCA jacks) .1.2 V/ 10 k Audio section Maximum Power (Front 96 kHz .20 22,000 Hz 48 kHz .20 22,000 Hz 44.1 kHz .20 20,000 Hz Total Harmonic Distortion .0.010 % (1 kHz) S/N Ratio (dB) . 98 dB (DVD-Video 96 kHz) Dynamic Range . 98 dB (DVD-Video 96 kHz) Disc Format .DVD-Video/ VIDEO-CD/ CD-DA Sampling Frequency .44.1/48/96 kHz Quantifying Bit Number . 16/20/24 bit USB interface section USB Standard .USB 2.0 High speed File System .FAT 16/ 32 Maximum Power Supply Current . 1A (5V) D/A Converter . 24 Bit Video Decoder .MPEG1/MPEG2/MPEG4/WMV/H.264 Audio Decoder . MP3/ WMA/ AAC/ WAV (Linear PCM) Bluetooth section Technology .Bluetooth 2.1 Certifi ed Frequency .2.402 2.480 GHz Output Power .+4dBm (MAX), 0dBm (AVE), Power Class2 Maximum Communication Range .Line of sight approx. 10m (32.8 ft) Profi le .HFP (Hands Free Profi le), SPP (Serial Port Profi le) HSP (Headset Profi le), OPP (Object Push Profi le) PBAP (Phonebook Access Profi le) SYNC (Synchronization Profi le) FM tuner section Frequency Range (50 kHz) .87.5 MHz 108.0 MHz Usable Sensitivity (S/N : 26 dB) .0.7 V/75 Quieting Sensitivity (S/N : 46 dB) .1.6 V/75 Frequency Response ( 3.0 dB) .30 Hz 15 kHz S/N Ratio (dB) .65 dB (MONO) Selectivity ( 400 kHz) . 80 dB Stereo Separation .35 dB (1 kHz) AM tuner section Frequency Range (9 kHz) LW .153 279 kHz MW .531 1611 kHz Usable Sensitivity LW .45V MW .25V Video section Color System of External Video Input .NTSC/PAL External Video Input Level (RCA/mini jack) .1 Vp-p/ 75 External Audio Max Input Level (RCA/mini jack) .2 V/ 25 k Video Output Level (RCA jacks) .1 Vp-p/ 75 Audio Output Level (RCA jacks) .1.2 V/ 10 k Audio section Maximum Power (Front 96 kHz .20 22,000 Hz 48 kHz .20 22,000 Hz 44.1 kHz .20 20,000 Hz Total Harmonic Distortion .0.010 % (1 kHz) S/N Ratio (dB) . 98 dB (DVD-Video 96 kHz) Dynamic Range . 98 dB (DVD-Video 96 kHz) Disc Format .DVD-Video/ VIDEO-CD/ CD-DA Sampling Frequency .44.1/48/96 kHz Quantifying Bit Number . 16/20/24 bit USB interface section USB Standard .USB 2.0 Full speed File System .FAT 16/ 32 Maximum Power Supply Current . 1A (5V) D/A Converter . 24 Bit Video Decoder .MPEG1/MPEG2/MPEG4/WMV/H.264 Audio Decoder . MP3/ WMA/ AAC/ WAV (Linear PCM) Bluetooth section (DNX5380BT) Technology .Bluetooth 2.1 Certifi ed Frequency .2.402 2.480 GHz Output Power .+4dBm (MAX), 0dBm (AVE), Power Class2 Maximum Communication Range .Line of sight approx. 10m (32.8 ft) Profi le .HFP (Hands Free Profi le), SPP (Serial Port Profi le) HSP (Headset Profi le), OPP (Object Push Profi le) PBAP (Phonebook Access Profi le) SYNC (Synchronization Profi le) FM tuner section Frequency Range DNX5380, DNX5380M .87.5 MHz 108.0 MHz (50 kHz) DNX5380BT, DNX5380 (Region code 6) . 87.5 MHz - 108.0 MHz (50 kHz) 87.9 MHz - 107.9 MHz (200 kHz) Usable Sensitivity (S/N : 26 dB) DNX5380 (Region code 6) .9.3 dBf (0.7V/75) DNX5380BT, DNX5380 (Region code 3), DNX5380M .9.3 dBf (0.8V/75) Quieting Sensitivity (S/N : 46 dB) .15.2 dBf (1.6V/75) Frequency Response ( 3.0 dB) .30 Hz 15 kHz S/N Ratio (dB) DNX5380 (Region code 6) .