Philips-AX6301-cd-sm 电路图 维修手册.pdf
Technical specification .1-1 Features .1-1 Accessories .1-1 Instruction For Use.1-2.1-8 Safety .to switch the player on, start playback and interrupt playback 4 ESP.to switch on /off ESP function 5 DBB.to select bass enhancement 6 .to skip forward and search forward for CD and MP3-CD .to skip forward for VCD 7 + + .to select the desired album up for MP3-CD playback .to fast forward during VCD playback 8 DISPLAY.(for CD and VCD) to display the current track number and remaining / elapsed playing time. (for MP3-CD) to display the current album number, track number, remaining/elapsed playing time. 9 Display 0.to select the desired album down for MP3-CD playback .to fast rewind during VCD playback ! .to skip backward and search backward for CD and MP3-CD .to skip backward for VCD OFFRESUMEHOLD OFF.switches RESUME and HOLD off RESUME.stores and starts at the last position played HOLD.locks all buttons on the set except the volume control slider # 9 (STOP).to stop playback, clear a program and switch the set off $ PROGRAM.to program tracks % MODE .to select playback options - REPEAT 1, REPEAT ALL, SCAN and SHUFFLE LINE OUT/p.to connect .- headphones - the set to the audio/video input of your stereo equipment .to start /pause playback / return to normal playback ( + +.to select the desired album up for MP3-CD playback .to fast forward during VCD playback MODE OSD PROG RESUMEVIEWZOOMP/N PBCGO TOSLOWRETURN R/L 10/0 1 2 3 4 5 6 7 8 9 1 ( 2 3 4 5 6 7 90! 8# $ % AC: 110V/220V and 50/60Hz). Any other product may damage the player. 1Make sure the mains voltage matches the voltage requirement of the mains adapter. 2Connect the mains adapter to the 4.5V DC socket of the player and to the wall socket. PLAYBACK Playing a disc With this set, you can play - Video discs - audio discs (pre-recorded audio CDs, fi nalized audio CDs and CD-RWs) - MP3-CDs (CD-ROMs with MP3 fi les) For VCD playback, you need to connect the player to your TV (see Connecting to your TV system) 1 Push the OPEN 2 slider to open the disc lid. 2 Insert a disc, printed side up, by pressing the CD onto the hub. Close the lid by pressing the lid down. 3 Press 2; on the set to start playback. Playback starts. Video disc: appears. The current track number and the elapsed time are displayed. Audio disc: The current track number and the elapsed playing time are displayed. MP3-CD: MP3 appears. The current album number, track number and the elapsed playing time are displayed. 4To stop playback, press 9. Video disc: The number of tracks and the total playing time of the disc are displayed. Audio disc: The number of tracks and the total playing time of the disc are displayed. MP3-CD: The number of albums and the number of tracks are displayed. . TIP: - Always disconnect the adapter when you are not using it. - Once the mains adapter is connected, the power supply from batteries will be switched off automatically. TV connection Connecting to your TV System Use the supplied AV cable to connect the player to your TV system. To ensure uninterrupted viewing, we recommend you use AC mains power for your play- er during VCD operation. 1Insert the yellow video cable pin into the VIDEO IN jack on the rear of your TV. Insert the white and red audio cable pins respectively into the left and right AUDIO IN jacks of your TV. 2Insert the pin on the other end of the AV cable into the LINE OUT jack on your player. 3Connect the mains adapter to the 4.5V DC socket of the player and to the wall socket. LINE OUT p Playing a disc 5 Press 9 again to switch off the player. To remove the disc, hold it by its edge and press the hub gently while lifting the disc. TIP: - You can only press 2; on the set to start playback. - if there is no activity, the player will automatically switch off in 30 seconds to save energy. - After pressing 2;, you may need to wait for 10 seconds or more until the fi rst MP3 track is played. Pause 1Press 2; to interrupt playback. The track number and the elapsed playing time are displayed. 2Press 2; again to resume playback TIP: - If the set stays in the PAUSE mode for more than 90 seconds, it will enter the STOP mode automatically. After 30 seconds or more in the STOP mode, your set automatically powers down. 0 INSTRUCTION FOR USE 1-4 DISPLAY features for VCD, CD and MP3-CD During normal playback, you can press OSD on the remote control or DISPLAY on the set repeatedly to select your desired display. Press OSD or DISPLAYDisplay 1xTrack number + tracks remaining playing time 2xNormal display FEATURES Return If you want to return to MENU PLAY (the main menu at the beginning of your VCD) during SEQUENCE PLAY, press RETURN. Go to 1Press GO TO on the remote control. GO TO-:- appears on the TV screen. Enter the desired time from which you want to start playback. 2Press GO TO again to deactivate GO TO. GO TO CANCEL appears. View This feature allows you to scan through your VCD in 9 segments. 1Press VIEW to divide the whole movie of the video into 9 segments. The 7-second of each segment is played. After the last segment, playback starts from the fi rst segment. 2Select your desired segment using the number buttons on the remote control. Playback continues from the selected segment. 3Press VIEW again or 2; to resume normal playback. Zoom 1Press ZOOM on the remote control once to enlarge the picture by 2 times. ZOOM2 appears. 2Press ZOOM again to quit the zoom feature. RESTOREappears and normal playback resumes. Slow Select from 4 speeds to capture action in slow motion: 1/2, 1/4, 1/8, and 1/16. 1Press SLOW on the remote control once or more for playback at slow speed. Sound is muted and SLOW1/2, SLOW1/4, SLOW1/8 or SLOW1/16 is displayed. 2To resume normal playback, press 2;. Playing a VCD V2.0 with PBC PBC is a predefi ned play sequence stored in the CD. SEQUENCE PLAY is by default on when VCD playback starts. Before viewing your VCD, make sure the set is switched to the corresponding PAL or NTSC system of your TV set (except multi-system TVs). 1Press P/N repeatedly to select PAL or NTSC. is displayed when you load a VCD with PBC (Playback Control) into your player. 2You can press PBC to toggle between MENU PLAY and SEQUENCE PLAY. If SEQUENCE PLAY is selected, the playback starts from the beginning of the fi rst track. If MENU PLAY is selected, a list of tracks is displayed on the TV screen. TIP: This function is not available for discs without Table Of Contents. ZOOM SLOW GO TO VIEW RETURN P/N PBC FEATURES Special features for VCD playback only Adjusting your TV System Before viewing the Video CD, ensure that the set is switched to the corre- sponding PAL or NTSC system of your TV set (except multi-system TV). 1Connect the audio/video output cable to the corresponding ports of the TV set. 2Turn on your TV system and adjust the input mode to AV 3On the remote control, press P/N to toggle between PAL and NTSC TV systems. OSD - On Screen Display If you insert a VCD, your TV screen will serve as an additional display for messages (e.g. PLAY, STOP) and information stored in the VCD. Press OSD on the remote control or DISPLAY on the set repeatedly to switch OSD on or off. When OSD is switched on, your TV screen may for example display the follow- ing XX-MM:SS - where: “XX is the current track MM is for minute. SS is for second.OSD INSTRUCTION FOR USE 1-5 General MP3 information How to make a CD-ROM with MP3 fi les Use your computers CD burner to record (burn) music fi les from your hard disc on a CD-ROM. Use ISO9660 disc format. Make sure that the fi le names of the MP3 fi les end with .mp3 Note: Data compression in UDF is not supported. Supported formats This set supports: -Video CD V1.0, Video CD V2.0 - DVCD -ISO-9660, ISO-9660+Joliet, Joliet, Packet writing -MP3 bit rate: 32-320 kbps and variable bit rate (VBR) -Maximum number of tracks per disc: 400 -Maximum number of albums per disc: 99 TIP: -When the system reads a mixed mode MP3-CD, only the number of total CDDA tracks is displayed. GENERAL INFORMATION Maintenance Do not touch the lens A of the player. Do not expose the unit, batteries or discs to humidity, rain, sand or excessive heat (caused by heating equipment, or direct sunshine). You can clean the player with soft, slightly dampened and lint-free cloth. Do not use any cleaning agents, as they may be corrosive. To clean the CD, wipe it in a straight line from the center toward the edge using soft, lint-free cloth. Never write on a disc or attach a sticker to it. Discs and lens may cloud over when the unit is moved suddenly from cold to warm surroundings. Leave the player in a warm environment until the moisture has evaporated. Active mobile phones in the vicinity may cause malfunctions. Avoid dropping the unit as this may cause damage. Enviromental information We have done our best to make the packaging easily separable into mono materials. Cardboard (box) and polyethylene (bags, protective foam sheet). Your set consists of materials which can be recycled if disassembled by a spe- cialized company. Please observe the local regulations regarding the disposal of packing material, exhausted batteries and old equipment. GENERAL INFORMATION General MP3 information How to get music fi les The music compression technology MP3 (MPEG Audio Layer 3) reduces the digital data of an audio CD signifi cantly while maintaining CD-like sound quality. With MP3 you can record up to 10 hours of CD-like music on a single CD-RW. How to organize music fi les Either download legal music fi les from the Internet to your computer hard disc or create them from your own audio CDs. For this, insert an audio CD into your computers CD-ROM drive and convert the music using appropriate encoder software. To achieve good sound quality, a bit rate of 128 kbps or higher is recommended for MP3 music fi les. How to make a CD-ROM with MP3 fi les In order to easily handle the large number of music fi les on a CD-ROM, you can organize them in folders (albums). The tracks of an album will be played in alphabetical order. If you want to arrange them in a certain order, let the fi le names start with numbers. For example: 001-EWORLD.MP3 002-FIRESTARTER.MP3 003-DEEP.MP3 Albums will be arranged in alphabetical order, but subfolders (albums within another album) will be played immediately after the album in which they are located. Albums without MP3 fi les will be skipped. If there are MP3 fi les which you did not put into an album, you will fi nd them in the album VARIOUS with album number 0. VARIOUS is the fi rst album that will be played. Accessories Headphones, HE035 Mains adapter, AY3193 Wireless remote control, AY3788 AV cable, AY3484 Headphones (HE035) Connect the supplied headphones to LINE OUT/p. TIP: LINEOUT/ p.can also be used to connect this set to your HiFi or TV system. Take care when using headphones Hearing safety Do not play your headphones at a high volume. Hearing experts advise that continuous use at high volume can permanently damage your hearing. Traffi c safety Do not use your headphones while driving a vehicle. It may create a hazard and it is illegal in many countries. E HOLD L INE O UT / INSTRUCTION FOR USE 1-6 Selecting tracks using the number digits Press number buttons 0-9 on the remote control to select your desired track. If more than 10 tracks are stored in a disc, you can use 10+: Press 10+ fi rst, and then the last number. Press 10+ once for 10+, twice for 20+, and three times for 30+, and so on. Searching VCDs at different fast / slow speeds during playblack Press + once or several times to select your desired forwarding speed: PressTimes of normal speed 1xFORWARD x1 2xFORWARD x2 3xFORWARD x3 4xFORWARD x4 5xNormal Play Press once or several times to select your desired rewinding speed: PressTimes of normal speed 1xBACKWARD x1 2xBACKWARD x2 3xBACKWARD x3 4xBACKWARD x4 5xNormal Play Playing tracks repeatedly or in a random order - MODE Press MODE once or several times to select the desired playback possibility. REPEAT 1: The current track is played repeatedly. REPEAT ALL: The entire disc is played repeatedly. But forMP3- CDs, only all the tracks in the current album are played repeatedly. SHUFFLE: All tracks are played in a random order. SCAN : The fi rst 10 seconds of each track is played in sequence. REPEAT1ALL SHUFFLE SCAN GENERAL INFORMATION/FEATURE Volume and sound Volume adjustment Adjust the volume by using the volume control VOL E. Sound adjustment 1 Press DBB for a moderate bass enhancement. appears. Press DBB again to switch off the bass enhancement. disappears. R/L : Channel and stereo sound selection It is possible to select the right channel or left channel or stereo from a multi- channel disc when you connect your player to your TV or Hi-Fi system. 1 For VCDs, make sure you connect the player correctly to your TV system fi rst. For music discs, make sure you connect the player to your Hi-Fi system fi rst. 2 On the remote, press R/L once or more to select your sound output option. DBB DBB FEATURES Selecting and searching on all discs Selecting a track during playback Briefl y press or once or several times to skip to the beginning of the previous or subsequent track. Playback continues with the selected track . Search for a passage during CD playback 1Keep or pressed to fi nd a particular passage in a backward or forward direction. Searching is started. 2Release the button at the desired passage. Normal playback continues. Selecting albums and tracks on MP3-CDs Selecting an album during playback Briefl y press - or + once or several times to skip to the fi rst track of the cur- rent, previous or subsequent album. Playback starts from the fi rst track of the selected album. Selecting a track during playback 1 Briefl y press or once or several times to select previous or subsequent tracks within the cur- rent album. 2Release the button at the desired track. Playback continues with the selected track. R/L INSTRUTION FOR USE 1- 7 ESP - Electronic Skip Protection The ESP duration is 120 seconds for CD playback, 400 seconds for MP3 disc playback and 30 seconds for VCD playback. The ELECTRONIC SKIP PROTECTION system prevents sound loss or unstable playback caused by light vibra
