Sony-STRD311-rec-sb436 电路图 维修手册.pdf

Model:STRD311 No.436 Subject:Output Transistor FailureDate:May 1, 1995 Symptom: (11)Output Transistors fail, sometimes repeatedly, after replacement. Solution:After replacing the defective output transistors, and any other defective components, change the value of the resistors as noted below. REFFORMERNEW DESCRIPTIONPART NUMBERDESCRIPTIONPART NUMBER R7073.3K OHM 1/4 WATT 1-249-423-1115K OHM 1/4 WATT 1-249-431-11 R7573.3K OHM 1/4 WATT 1-249-423-1115K OHM 1/4 WATT 1-240-431-11 Note: When replacing output transistors be sure to use a sufficient amount of heat sink compound on the replacement device. Tighten the mounting screw with enough force to firmly secure the transistor to the heat sink for adequate heat transfer. In some instances the following 47uf 25V electrolytic capacitors, C709, 759, 704, and 754 were not mounted on the main board at the factory. Add these capacitors, part number 1-124-477-11, before releasing the unit. CSA-13Hi-Fi Products Service Bulletin Sony Service Company - Technical Services A Division of Sony Electronics Inc. Sony Drive, Park Ridge, New Jersey 07656 Reference: FPR-PPRINTED IN USA Autoflagged - YES PRINTED ON RECYCLED PAPER RadioFans.CN 收音机爱 好者资料库 Filename:HFP0436.SB Directory:J:SBDOCMAY95 Template:C:WINWORDS_BULL.DOT Title:STRD311 Service Bulletin Subject:Output Modification Author:Hoyt Wing Lee Keywords: Comments: Creation Date:05/01/95 11:13 AM Revision Number:2 Last Saved On:05/01/95 11:13 AM Last Saved By:Hoyt Wing Lee Total Editing Time:0 Minutes Last Printed On:04/01/96 9:41 AM As of Last Complete Printing Number of Pages:1 Number of Words:203 (approx.) Number of Characters:1,158 (approx.) RadioFans.CN 收音机爱 好者资料库