Marantz-CC4300-cd-mz03059 电路图 维修手册.pdf

100 Corporate Drive Mahwah, NJ 07430 Service Bulletin No. : MZ03-059 Date: December 13, 2006 _ Model: CC4300 / PMD371 Subject: Incorrect operation with the Remote controller. Symptom: “AMP Discrete power ON/ OFF” code is received, then the unit goes to Power ON/Standby mode. (16 12 01/16 12 02 code) Solution: Replace MICRO PROCESSOR IC101 on the MAIN PCB. First please check the version of IC101. The version number can be confirmed using SERVICE MODE. Refer to page 1 of the service manual. _ CONFIDENTIALITY NOTICE: The information contained in this document is intended for the exclusive use by MARANTZ Authorized Service Centers and their employees. This document may contain information that is privileged, confidential and may be protected from disclosure under applicable laws and terms of the MARANTZ Service Agreement. Any distribution, disclosure, dissemination or copying of this document and the information it contains is prohibited. No responsibility will be accepted by MARANTZ for any damage, injury or loss resulting from the misuse of the information contained in this document. RadioFans.CN 收音机爱 好者资料库 _ CONFIDENTIALITY NOTICE: The information contained in this document is intended for the exclusive use by MARANTZ Authorized Service Centers and their employees. This document may contain information that is privileged, confidential and may be protected from disclosure under applicable laws and terms of the MARANTZ Service Agreement. Any distribution, disclosure, dissemination or copying of this document and the information it contains is prohibited. No responsibility will be accepted by MARANTZ for any damage, injury or loss resulting from the misuse of the information contained in this document. Parts: FORMER NEW Ref # Description Part Number Description Part Number IC101 MICRO PROCESSOR *HU100590R MICRO PROCESSOR *HU100710R Serial Number Range: This solution applies to the following Lot number. MZxxxxxx01xxxx to MZxxxxxx36xxxx RadioFans.CN 收音机爱 好者资料库