Marantz-PM8004-int-mz10043 电路图 维修手册.pdf

100 Corporate Drive Mahwah, NJ 07430 Service Bulletin No. : MZ10-043 Date: September 17, 2010 _ Model: PM8004 Subject: Modification of the Firmware. This Service information is revised of MZ10-033. We revised only Serial number of PM8004. This is Information only. Symptom: Addition of the following new 2-IR command for Power Amplifier Direct In/Off. 1) Power Amp Direct In On: (RC5ex) 16-01-30 2) Power Amp Direct In Off: (RC5ex) 16-01-31 Solution: COUNTERMEASURE: We modified the firmware. F/W: PM7004_V07.h16 *For update procedures, please see service manual. Serial Number Range: We will apply the above modification to the production models in the following serial numbers. Corresponded from 200110*000001 to the advanced software. We changed the Service Code from 00 to 01. _ CONFIDENTIALITY NOTICE: The information contained in this document is intended for the exclusive use by MARANTZ Authorized Service Centers and their employees. This document may contain information that is privileged, confidential and may be protected from disclosure under applicable laws and terms of the MARANTZ Service Agreement. Any distribution, disclosure, dissemination or copying of this document and the information it contains is prohibited. No responsibility will be accepted by MARANTZ for any damage, injury or loss resulting from the misuse of the information contained in this document. RadioFans.CN 收音机爱 好者资料库