Marantz-UD9004-sacd-mz09132 电路图 维修手册.pdf

100 Corporate Drive Mahwah, NJ 07430 Service Bulletin No. : MZ09-132 Date: December 17, 2009 _ Model: UD9004 Subject: Software update Countermeasure is applicable only upon claim from the customer. Symptom: 1) BD-Live of Harry Potter and the Half-Blood Prince is not operated properly. 2) The MENU might be not displayed perfectly while playing the Blu-ray Disc Pure audio experience (D&M Europe produced) when the Tray is closed and opened. 3) No German text in disc menu of Blu-ray Disc Underworld. Solution: The firmware has been updated to correct the minor problems. Updating the firmware: Please do not use a Proxy for updating in the Network environment! If the customer uses a Proxy setting the unit wont update the firmware properly. *For update procedures, please see manual. *Please do not turn off the Power of the unit during the update operation. Confirmation of the version: 1) Press the OPEN/CLOSE button and open the Disc Tray. 2) Remove the Disc from the Tray. 3) Please confirm! NO DISC on the FL Display. 4) While pushing the PLAY and OPEN/CLOSE button, turn on the power of unit. 5) Plug in AC CORD. 6) The indication of PLAY and PAUSE will be displayed on FL Display. 7) Please confirm! NO DISC on the FL Display, and wait 10 seconds. 8) Press the buttons on the remote control in the following order 3, 2, 6 and 5. _ CONFIDENTIALITY NOTICE: The information contained in this document is intended for the exclusive use by MARANTZ Authorized Service Centers and their employees. This document may contain information that is privileged, confidential and may be protected from disclosure under applicable laws and terms of the MARANTZ Service Agreement. Any distribution, disclosure, dissemination or copying of this document and the information it contains is prohibited. No responsibility will be accepted by MARANTZ for any damage, injury or loss resulting from the misuse of the information contained in this document. RadioFans.CN 收音机爱 好者资料库 9) The version of the firmware will be indicated on the FL Display. 10) The firmware list will also be shown on connected TV (GUI). 11) Push the UP button of cursor button, version of the each firmware will be indicated on the FL Display. Serial Number Range: Please apply the above modification to the production models in the following serial numbers. (full digits) *000001 *000170 _ CONFIDENTIALITY NOTICE: The information contained in this document is intended for the exclusive use by MARANTZ Authorized Service Centers and their employees. This document may contain information that is privileged, confidential and may be protected from disclosure under applicable laws and terms of the MARANTZ Service Agreement. Any distribution, disclosure, dissemination or copying of this document and the information it contains is prohibited. No responsibility will be accepted by MARANTZ for any damage, injury or loss resulting from the misuse of the information contained in this document. RadioFans.CN 收音机爱 好者资料库