Marantz-SR9600-avr-mz06011 电路图 维修手册.pdf

100 Corporate Drive Mahwah, NJ 07430 Service Bulletin No. : MZ06-011 Date: April 25, 2007 _ Model: SR9600 Subject: Software Update Symptom: 1. When the unit is connected via HDMI to a SONY Video Projector, model VPL-VW100, the picture can not be viewed. 2. When the unit is set to “ECONOMY STANDBY”, pressing the main power button to POWER OFF then pressing the main power button to POWER ON, the unit will enter the Standby mode. The user cannot Power the set ON by using the remote controller when it is in Standby mode. 3. When the “SLEEP” mode is set and the OSD “ON” mode is selected the unit will display “3min” in Main volume level area of the TV screen. * This update is only intended to improve the minor problems listed, and is not required for all units you service. Do not apply this update to the SR9600A (with XM radio). Solution: 1. Update MAIN and SUB Microprocessor software. The new software versions are as follows. 1) MAIN Build_007 2) SUB Build_010 First please check the Microprocessor version. The version can be confirmed using the “SERVICE MODE”. Please refer to the Service Manual page 11 for the procedure. 2. Update the firmware using: SR9600_Main007_Sub010.zip (611 kB) _ CONFIDENTIALITY NOTICE: The information contained in this document is intended for the exclusive use by MARANTZ Authorized Service Centers and their employees. This document may contain information that is privileged, confidential and may be protected from disclosure under applicable laws and terms of the MARANTZ Service Agreement. Any distribution, disclosure, dissemination or copying of this document and the information it contains is prohibited. No responsibility will be accepted by MARANTZ for any damage, injury or loss resulting from the misuse of the information contained in this document. RadioFans.CN 收音机爱 好者资料库 The contents of “SR9600_Main007_Sub010.zip” file. 1) 00M11AJ499B07.mot (MAIN micro) Please refer to the Service Manual on page 30 for the procedure. 2) 00M11AJ499F10.mot (SUB micro) Please refer to the Service Manual on page 30 for the procedure. Attention-1: Please copy the file to your PC first and be sure to unzip it before using it. Serial Number Range: 1. This update applies to the following serial number range. 1.) SR9600/U1B applies to xx03xxxxxxxxxx and earlier. This improvement has been done in production from serial number xx04xxxxxxxxxx and later. 2.) SR9600/U1G applies to xx03xxxxxxxxxx and earlier. This improvement has been done in the production serial number xx04xxxxxxxxxx and after. _ CONFIDENTIALITY NOTICE: The information contained in this document is intended for the exclusive use by MARANTZ Authorized Service Centers and their employees. This document may contain information that is privileged, confidential and may be protected from disclosure under applicable laws and terms of the MARANTZ Service Agreement. Any distribution, disclosure, dissemination or copying of this document and the information it contains is prohibited. No responsibility will be accepted by MARANTZ for any damage, injury or loss resulting from the misuse of the information contained in this document. RadioFans.CN 收音机爱 好者资料库