Art-CX311-xo-sm 电路图 维修手册.pdf

CX311CX311 Stereo 2-Way Active Crossover with Subwoofer Output SERVICE GUIDE RadioFans.CN 收音机爱 好者资料库 IMPORTANT SAFETY INSTRUCTIONS READ FIRST This symbol, wherever it appears, This symbol, wherever it appears, alerts you alerts you to the presence of uninsulated to important operating and maintenance dangerous voltages inside the enclosure that instructions in the accompanying literature. may be sufficient to constitute a risk of shock. Please read the manual. Read instructions Retain these safety and operating instructions for future reference. Heed all warnings printed here and on the equipment. Follow the operating instructions printed in this user guide. Do not open There are no user serviceable parts inside. Refer any service work to qualified technical personnel only. Power sources Only connect the unit to mains power of the type described in this user guide or marked on the rear panel. The power source must provide a good ground connection. Power cord Use the power cord with sealed mains plug appropriate for your local main supply as provided with the equipment. If the provided plug does not fit into you outlet consult your service agent. Route the power cord so that it is not likely to be walked on, stretched or pinched by items placed upon or against. Grounding Do not defeat the grounding and polarization means of the power cord plug. Do not remove or tamper with the ground connection on the power cord. Moisture To reduce the risk of fire or electrical shock, do not expose the unit to rain, moisture or use in damp or wet conditions. Do not place container of liquid on it, which may spill into any openings Heat Do not locate the unit in a place close to excessive heat or direct sunlight, as this could be a fire hazard. Locate the unit away from any equipment, which produces heat such as: power supplies, power amplifiers and heaters. Environment Protect from excessive dirt, dust, heat, and vibration when operating and storing. Avoid tobacco ash, drink spillage and smoke especially that associated with smoke machines. Handling Protect the controls from damage during transit. Use adequate padding if you need to ship the unit. To avoid injury to yourself or damage to the equipment take care when lifting, moving or carrying the unit. Servicing Switch off the equipment and unplug the power cord immediately if it is exposed to moisture, spilled liquid or the power cord or plug becomes damaged during a lightning storm or if smoke odor or noise is noted. Refer servicing to qualified technical personnel only. Installation Install the unit in accordance with the instruction printed in the user guide. 2 RadioFans.CN 收音机爱 好者资料库 TABLE OF CONTENTS IMPORTANT SAFETY INSTRUCTIONS READ FIRST .2 OVERVIEW.4 Features .4 INSTALLATION.5 AC POWER HOOKUP.5 INPUT/OUTPUT CONNECTIONS.5 OPERATION.6 FRONT PANEL CONTROLS.6 POWER SWITCH.6 LOW OUTPUT LEVEL CONTROLS .6 LOW CUT FILTER SWITCH .6 CROSSOVER FREQUENCY CONTROL .6 HIGH OUTPUT LEVEL CONTROL.6 PHASE SWITCH.6 SUB OUTPUT LEVEL CONTROL.7 SUBWOOFER FREQUENCY CONTROL.7 REAR PANEL CONNECTORS.7 XLR INPUT JACKS.7 1/4” INPUT JACKS.7 1/4” OUTPUT JACKS.7 APPLICATIONS.8 Typical Setup.8 Signal Flow .8 Initial Setup Tips .8 SERVICE PARTS .9 FULL BILL OF MATERIALS .10 Assembly.10 Main Ckt Board.11 SCHEMATIC.13 WARRANTY INFORMATION.15 Limited Warranty.15 Exclusions .15 SERVICE.16 SPECIFICATIONS.17 3 RadioFans.CN 收音机爱 好者资料库 OVERVIEW The ART CX311 Stereo 2-Way Active Crossover with Subwoofer Output offers a superb level of sound quality and its straightforward user interface gives you quick and easy access to all of its features. Designed for home, club, or DJ system applications or live sound reinforcement, the CX311 employs 24dB/ octave state-variable, fourth-order, Linkwitz-Riley filters. These filters guarantee in- phase outputs at all frequencies. This ensures the proper acoustic summing of common signals from adjacent drivers in the crossover region. The CX311 is a stereo 2-way electronic crossover with an additional subwoofer output. Each crossover channel splits the frequency of an input signal into two separate signals, which may then be sent to amplifiers or other signal processing equipment in a sound system. The subwoofer output can be used to add punch to low bass audio. Each stereo channel features high and low output level and crossover frequency rotary controls, while the subwoofer channel features its own output level and crossover frequency rotary controls. A low cut switch for each channel may be used to remove unwanted subsonic audio that can damage amplifiers or speakers. Each stereo channel also includes a phase switch that can be used to detect or correct audio path connection errors. The rear panel features balanced XLR and 1/4” TRS input and output connectors. Power for the CX311 is internal. The ART CX311 Stereo 2-Way Active Crossover with Subwoofer Output has been carefully designed, engineered and manufactured to provide you with years of great sound and reliable service. Features Stereo 2-way operation with separate subwoofer output Fourth-order Linkwitz-Riley filters Balanced XLR and 1/4” TRS inputs and unbalanced 1/4” outputs Adjustable, wide crossover frequency range (250Hz to 6kHz) Independent output level control for each output Switchable low cut (30Hz) filters on each stereo channel and subwoofer Phase reverse switch on each stereo channels High output Rugged, fully shielded all-steel chassis Internal AC power supply with standard IEC connector Three year warranty 4 INSTALLATION The ART CX311 may be used in a wide variety of applications and environments. Enclosed in a 1U (1.75 inches high) rack-mountable, all-steel enclosure, the unit is designed for continuous professional use. The depth is 5 inches. Mounting location is not critical. However, for greater reliability, we recommend that you not place the unit on top of power amps or other sources of heat. AC POWER HOOKUP The CX311 has an internal power supply designed to operate from 105 to 120VAC at 50/60Hz. Units manufactured for use outside of the United States have been modified to comply with the required electrical specifications for the country of destination. Before plugging the CX311 into the AC mains, make sure that all of the equipment following the crossover outputs are turned off or that all of the outputs are turned down. INPUT/OUTPUT CONNECTIONS The CX311 has XLR and 1/4 TRS phone jack connectors for each input. Audio input connections are active balanced although the 1/4 phone jack connections can easily be converted to unbalanced operation by using two-conductor phone plugs. All output connections are unbalanced and use 1/4” TS phone jacks. 5 OPERATION FRONT PANEL CONTROLS POWER SWITCH The POWER switch applies and removes power to the unit. Make sure that all equipment after the CX311 is either off or the outputs are turned all the way down before turning the CX311 on or off. LOW OUTPUT LEVEL CONTROLS Each channel of the CX311 has a LOW OUTPUT LEVEL control. These controls are used to trim the output levels to the LOW OUTPUT jacks on the rear of the unit. These controls cover the range of 30dB to +10dB of output gain trim, as indicated on the front panel. In most cases you would set them to 0dB, for flattest response from the crossover. You can use these controls to compensate for amplifier gain variations or efficiency of your speakers. LOW CUT FILTER SWITCH The LOW CUT switch activates a 30Hz high pass filter. There is one for each of the LOW OUTPUT jacks and one for the SUBWOOFER OUTPUT. This filter is a 2-pole Butterworth design (12dB/octave). Its response reduces spurious subsonic frequencies, which tightens up the low end and helps to protect your amplifiers and speakers. CROSSOVER FREQUENCY CONTROL Each channel of the CX311 has a crossover FREQUENCY control to set the crossover point for the high and low frequencies. These controls cover the frequency range of 250 Hz to 6 kHz. All frequencies below the set frequency will be sent to the LOW OUTPUT and all frequencies above the set frequency will be sent to the HIGH OUTPUT. The main crossover filters are 4-pole Linkwitz-Riley designs (24dB/octave). This yields a sharp rolloff to help protect speakers and the outputs sum to a flat response. HIGH OUTPUT LEVEL CONTROL Each channel of the CX311 has a HIGH OUTPUT LEVEL control. These controls are used to trim the output levels to the HIGH OUTPUT jacks on the rear of the unit. These controls cover the range of 30dB to +10dB of output gain trim, as indicated on the front panel. In most cases you would set them to 0dB, for flattest response from the crossover. You can use these controls to compensate for amplifier gain variations or efficiency of your speakers. PHASE SWITCH Each channel of the CX311 has a PHASE switch. These switches are used to switch the polarity (invert the phase) of the signals going to the HIGH OUTPUT jacks. Normally you would leave these 6 switches in the out (NORM) position. Pushing a button in (INVERT position) may be used to help correct audible phase-related problems. SUB OUTPUT LEVEL CONTROL This control is used to trim the audio output level to the SUBWOOFER OUTPUT jack on the rear of the unit. The subwoofer signal is used to provide extra bass via a mono subwoofer speaker in your system. This control covers the range of 30dB to +10dB of output gain trim, as indicated on the front panel. In most cases you would set it to 0dB. You can use this control to compensate for amplifier gain variations or efficiency of your speaker. SUBWOOFER FREQUENCY CONTROL The SUBWOOFER FREQUENCY control sets the crossover point for signals going to the SUBWOOFER OUTPUT jack. This control covers the frequency range of 50 Hz to 250 Hz. For this function, both of the input channel signals are combined and frequencies below the set frequency will be sent to the SUBWOOFER OUTPUT. This is in addition to the normal signals that are sent to each of the channels other outputs. REAR PANEL CONNECTORS It is easy to interface the unit with a wide variety of equipment. The rear panel has balanced XLR and 1/4” inputs as well as unbalanced 1/4” outputs. XLR INPUT JACKS The XLR input connections are balanced and follow the AES standard for wiring: Pin 1 = Ground, Pin 2 = Hot (+) and Pin 3 = Cold (-). These inputs directly parallel the 1/4” inputs. 1/4” INPUT JACKS The 1/4” input connections are balanced with Tip = Hot (+), Ring = Cold (-), and Sleeve = Ground. These inputs directly parallel the XLR inputs. 1/4” OUTPUT JACKS The 1/4” output jacks are unbalanced with Tip = Hot (+) and Sleeve = Ground. They are used for sending signals to amplifiers, or other unbalanced equipment. 7 APPLICATIONS Typical Setup For a stereo 2-way system, separate high frequency (horn or tweeter) and low frequency (bass) s