Philips-DVP-3360-Service-Manual(1) 电路图 维修手册.pdf
《Philips-DVP-3360-Service-Manual(1) 电路图 维修手册.pdf》由会员分享,可在线阅读,更多相关《Philips-DVP-3360-Service-Manual(1) 电路图 维修手册.pdf(52页珍藏版)》请在收音机爱好者资料库上搜索。
1、TABLE OF CONTENTS Page Version 1.3 Service Manual . Technical Specifications.1-2 . Safety Instruction, Warning 525 (NTSC/60Hz) Playback: Multi-standard (PAL/NTSC) Video performance Video DAC: 12 bits, 108 MHz Y Pb Pr: 0.7 Vpp 75 ohm Video output: 1 Vpp 75 ohm Video format Digital compression: MPEG 2
2、: DVD/SVCD MPEG 1: VCD/DivX Horizontal resolution: DVD: 720/1920 pixels (50 Hz); 720/1920 pixels (60 Hz) VCD: 352 pixels (50 Hz); 352 pixels (60 Hz) Vertical resolution: DVD: 576/1080 lines (50 Hz); 480/1080 lines (60 Hz) VCD: 288 lines (50 Hz); 240 lines (60 Hz) Audio performance DA converter: 24 b
3、its, 192 kHz Frequency response: DVD: 4 Hz - 22 kHz (48 kHz); 4 Hz - 44 kHz (96 kHz) SVCD: 4 Hz - 20 kHz (44.1 kHz); 4 Hz - 22 kHz (48 kHz) CD/VCD: 4 Hz - 20 kHz (44.1 kHz) Signal-Noise (1 kHz): 90 dB (A-weighted) Dynamic range (1 kHz): 80 dB (A-weighted) Crosstalk (1 kHz): 70 dB Distortion/noise (1
4、 kHz): 65 dB MPEG MP3: MPEG Audio L3 Audio format Digital: MPEG/AC-3/PCM: Compressed digital (16, 20, 24 bits fs, 44.1, 48, 96 kHz) MP3 (ISO 9660): 96, 112, 128, 256 kbps IEC61937 for MPEG 1/2, Dolby Digital HDMI output Main unit Dimensions (w x h x d): 360 x 38 x 203 (mm) Net Weight: approximately
5、1.3 kg Power Power supply rating: For U.K.: 240 V; 50 Hz For the rest of the Europe: 230 V; 50Hz Power consumption: 12 W Power consumption in standby mode: 90 dB (A-weighted) Dynamic range (1 kHz): 80 dB (A-weighted) Crosstalk (1 kHz): 70 dB Distortion/noise (1 kHz): 65 dB MPEG MP3: MPEG Audio L3 Au
6、dio format Digital: MPEG/AC-3/PCM: Compressed digital (16, 20, 24 bits fs, 44.1, 48, 96 kHz) MP3 (ISO 9660): 96, 112, 128, 256 kbps IEC61937 for MPEG 1/2, Dolby Digital HDMI output Main unit Dimensions (w x h x d): 360 x 37 x 209 (mm) Net Weight: approximately 1.3 kg Power Power supply rating: 110 V
7、 - 240V; 50/60 Hz Power consumption: 12 W Power consumption in standby mode: 90 dB (A-weighted) Dynamic range (1 kHz): 80 dB (A-weighted) Crosstalk (1 kHz): 70 dB Distortion/noise (1 kHz): 65 dB MPEG MP3: MPEG Audio L3 Audio format Digital: MPEG/AC-3/PCM: Compressed digital (16, 20, 24 bits fs, 44.1
8、, 48, 96 kHz) MP3 (ISO 9660): 96, 112, 128, 256 kbps IEC61937 for MPEG 1/2, Dolby Digital HDMI output Main unit Dimensions (w x h x d): 360 x 37 x 209 (mm) Net Weight: approximately 1.3 kg Power Power supply rating: 110 V - 240V; 50/60 Hz Power consumption: 12 W Power consumption in standby mode: 1
9、W Laser Specifi cation Type: Semiconductor laser InGaAIP (DVD), AIGaAs (CD) Wave length: 658 nm (DVD), 790 nm (CD) Output Power: 7.0 mW (DVD), 10.0 mW (VCD/CD) Beam divergence: 60 degrees For DVP3360K/75 1-2 Safety instruction 1. General safety Safety regulations require that during a repair: . Conn
10、ect the unit to the mains via an isolation transformer. . Replace safety components indicated by the symbol , only by components identical to the original ones. Any other component substitution (other than original type) may increase risk of fire or electrical shock hazard. Safety regulations requir
11、e that after a repair, you must return the unit in its original condition. Pay, in particular, attention to the following points: . Route the wires/cables correctly, and fix them with the mounted cable clamps. . Check the insulation of the mains lead for external damage. . Check the electrical DC re
12、sistance between the mains plug and the secondary side: 1) Unplug the mains cord, and connect a wire between the two pins of the mains plug. 2) Set the mains switch the “on” position (keep the mains cord unplug). 3) Measure the resistance value between the mains plug and the front panel, controls, a
13、nd chassis bottom. 4) Repair or correct unit when the resistance measurement is less than 1M?. 5) Verify this, before you return the unit to the customer/user (ref. UL-standard no. 1492). 6) Switch the unit “off”, and remove the wire between the two pins of the mains plug. 2.Laser safety This unit e
14、mploys a laser. Only qualified service personnel may remove the cover, or attempt to service this device (due to possible eye injury). Laser device unit Type : Semiconductor laser GaAlAs Wavelength : 650nm (DVD) : 780nm (VCD/CD) Output power : 7mW (DVD) : 10mW (DVD /CD) Beam divergence: 60 degree No
15、te: Use of controls or adjustments or performance of procedure other than those specified herein, may result in hazardous radiation exposure. Avoid direct exposure to beam. Safety instruction, Warning 2) Press the Setup button on the remote control,then the setup interface should be displayed on the
16、 TV screen; 3) Move the down cursor on remote control to choose Reference and press 1 3 8 9 3 1 on the remote control; 4) Then move the up or down cursors to choose the region code. Note: restart after above steps. * The other upgrade SW way is by memory, the steps are the same as CDRs, create the u
17、pgrade file into memory, and connect the USB flash drive to the USB socket on set, then press USB on remote control to access the content and play the upgrade file as above upgrade procedure. * 2) Press button or press down cursor on remote control to choose Preference and press right R36100K L9 10u
18、H FB40R R1270 C490.1uF C96 0.1uF C39 330pF C79 NC/0.1uF C261500pF R6210K 6PIN/2.0mm XP4 1 2 3 4 5 6 C284.7uF R5610K C150.1uF R38 100 C2 NC(100pF) L10 10uH C32 0.1uF C40 0.1uF R24.7K C25 0.1uF C72 0.1uF R6310K C11 0.1uF C31 NC/15pF R27 33 Q8 9012 C291uF R5733K C41 0.015uF C3 0.1uF +CE15 220uF/16V + C
19、E2470uF/10V D3 BAT54C 1 2 3 5PIN/2.0mm XP3 1 2 3 4 5 U2 AM5888 VINFC 1 VOTR- 9 VOTR+ 10 VOSL- 12 REGO2 3 TRB1 2 VOTK+ 15 REV 7 VOFC+ 14 VOFC- 13 VCTL 21 VCC2 19 NC 20 NC 24 BIAS 27 FWD 6 VINSL+ 4 REGO1 5 MUTE 28 VCC 8 VOSL+ 11 VOLD+ 17 VOLD- 18 VOTK- 16 VINLD 23 GND 22 TRB2 25 VINTK 26 G1 29 G2 30 C
20、110 0.1uF R61 10K C71 0.1uF R464.7 C13 0.1uF C27 0.1uF R300 R39 100 R60 NC/0R TOP XP2 SMD0.5 TOP 24 23 22 21 20 19 18 17 16 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 25 26 27 28 C35 0.01uF R115K/NC R42.5K 1% R101 NC/4.7K C18 0.1uF C38 330pF Q5 2SK3018 2 13 R20100K 4PIN/2.0mm XP7 1 2 3 4 C19 0.1uF TP8 R541
21、0K R21 0 R31180 Q7 9012 C9310uF/10V C24 0.1uF C37 NC C91 0.1uF L6 FB U3 PRTR5V0U2X 2 1 3 4 Q4 2N3904 C940.1uF C22 27pF R4227k R2410K TP13 Q1 NC(CES2302) 1 23 R91K F1 FUSE(500MA) C33 0.1uF R3210K R111K TP10 R1281K C30220pF C95 0.1uF R5510K Y2 27MHz R33100K R102 NC/4.7K R59180 TP11 C34 0.1uF Q24 9012
22、C87 0.1uF C48 0.1uF C84 0.1uF TP15 R52.2R C92 0.1uF C140.1uF/NC TP9 R4910K FB20R C90 0.1uF Q6 2SK3018 2 13 C74 0.1uF R1141K C9 10uF/10V +CE14 100uF/16V Q23 9012 R3410K + CE8 47uF/6.3V MT1389M LQFP 128 V1.0 U1 MT1389M MT1389M RFE 127 RFF 128 AVDD18 1 AVDD33 2 XTALI 3 XTALO 4 V20 5 REXT / GPO5 7 MDI1
23、8 LDO1 9 LDO2 10 AVDD33 11 DMO 12 FMO 13 TRAY_OPEN 14 TRAY_CLOSE 15 TRO 16 FOO 17 FG / GPIO2 18 USB_DP 19 USB_DM 20 USB_V33 21 PAD_VRT 22 USB_V18 23 GPIO3 / INT# 34 SF_CS_ 24 SF_DO 25 SF_DI 26 SF_CK 27 UP1_6 / SCL 28 UP1_7 / SDA 29 PRST# 32 IR 33 RD0 41 RD1 42 RD2 43 RD3 44 RD4 45 RD5 46 RD6 47 RD7
24、48 DQM0 49 RD15 50 RD14 51 DVDD18 52 RD13 53 RD12 54 RD11 55 RD10 56 RD9 57 RD8 58 DQM1 59 RCLK 60 RA11 61 RA9 62 RA8 63 DVDD18 79 V14 6 GPIO4 35 RA3 78 RA2 77 RA1 76 RA0 75 RA10 74 BA1 73 BA0 72 RAS# 70 CAS# 69 RWE# 68 RA4 67 DVDD33 71 RA5 66 RA6 65 RA7 64 RFD 126 RFC 125 RFB 124 RFA 123 RFH / OPIN
- 配套讲稿:
如PPT文件的首页显示word图标,表示该PPT已包含配套word讲稿。双击word图标可打开word文档。
- 特殊限制:
部分文档作品中含有的国旗、国徽等图片,仅作为作品整体效果示例展示,禁止商用。设计者仅对作品中独创性部分享有著作权。
- 关 键 词:
- Philips-DVP-3360-Service-Manual1 电路图 维修手册 Philips DVP 3360 Service Manual 维修 手册
收音机爱好者资料库所有资源均是用户自行上传分享,仅供网友学习交流,未经上传用户书面授权,请勿作他用。



Marshall-9100-62-02-Schematic电路原理图.pdf

