Alto-AComp-comp-sm 电路图 维修手册.pdf
《Alto-AComp-comp-sm 电路图 维修手册.pdf》由会员分享,可在线阅读,更多相关《Alto-AComp-comp-sm 电路图 维修手册.pdf(27页珍藏版)》请在收音机爱好者资料库上搜索。
1、Service Manual Version: 1.1 Model: COMP 24x32 Bit Digital Compressor Module RadioFans.CN 收音机爱 好者资料库 CONTENTS 1. Specification 2. Block Diagram 3. Schematic Diagram 4. Printed Circuit Board 5. Wiring Diagram 6. Test Procedure 7. Electrical Parts List 8. Exploded Views & Mechanical Parts List 9. Notes
2、 RadioFans.CN 收音机爱 好者资料库 1. SPECIFICATION (aCOMP) Electrical Frequency Response: +0.5 / -1.5 dB from 20Hz to 20 kHz S/N Ratio (process) 80 dB A wtg, 20 Hz-22kHz S/N Ratio (bypass) 90 dB A wtg, 20 Hz-22kHz THD+Noise: 500 Kohms A/D - D/A Conversions A/D converter: 1 bit Sigma-Delta D/A converter: 1 bi
3、t Sigma-Delta Output Number of Channels:2 Format:1/4 unbalanced Maximum Level (bypass): +9 dBu Output Impedance: LEFT input of the device under test. -LEFT output of the device under test - A input of Audio Precision System Two -RIGHT output of the device under test - B input of Audio Precision Syst
4、em Two On the Alphacomp: -Turn on the power switch. -Set INPUT volume to maximum. -Set OUTPUT volume to maximum. -Set PROGRAM to AGC PURE. -Set VARIATION to 1. Start the sweep (F9) and control the results (Page3 Graph) in the following conditions: -hardware bypass switch pressed. -hardware bypass sw
5、itch released. Audio Precision05/22/02 14:07:53 alfacomp_amplitude.at2c ColorLine StyleThickDataAxis CyanSolid1Anlr.Level ALeft GreenSolid1Anlr.Level BRight YellowSolid1Anlr.AmplLeft -10 +10 -7.5 -5 -2.5 +0 +2.5 +5 +7.5 d B V -10 +10 -7.5 -5 -2.5 +0 +2.5 +5 +7.5 d B V 2020k501002005001k2k5k10k Hz TH
6、D test On PC: -Load file: alfacomp_THD (APWin File menu / Open / Test ) Test Connections: -Output A of Audio Precision System Two - LEFT input of the device under test. On the Alphacomp: -Turn on the power switch. -Set INPUT volume to maximum. -Set OUTPUT volume to maximum. -Set PROGRAM to AGC PURE.
7、 -Set VARIATION to 1. Start the sweep (F9) and control the results (Page3 Graph) in the following conditions: -LEFT output of the device under test - A input of Audio Precision System Two / hardware bypass switch released. -RIGHT output of the device under test - B input of Audio Precision System Tw
8、o / hardware bypass switch released. Audio Precision05/22/02 14:10:23 alfacomp_THD.at2c ColorLine StyleThickDataAxis CyanSolid1Anlr.THD+N RatioLeft GreenSolid1Anlr.THD+N RatioLeft 0.1 1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 % 206k501002005001k2k Hz S/N test On PC: -Load file: alfacomp_SN (APWin File menu
9、/ Open / Test ) Test Connections: -Output A of Audio Precision System Two - LEFT input of the device under test. On the Alphacomp: -Turn on the power switch. - With hardware bypass switch in COMP position and both outputs connected to the Audio Precision, increase the INPUT level until the devices o
10、utputs clip, and after reduce the INPUT level itself until the outputs exit from clipping state. -Set OUTPUT volume to maximum. -Set PROGRAM to AGC PURE. -Set VARIATION to 1. Start the sweep (F9) and control the results (Page3 Graph) in the following conditions: -LEFT output of the device under test
11、 - A input of Audio Precision System Two / hardware bypass switch pressed. -RIGHT output of the device under test - B input of Audio Precision System Two / hardware bypass switch pressed. Audio Precision05/22/02 14:13:55 alfacomp_SN.at2c ColorLine StyleThickDataAxis CyanSolid1Anlr.AmplLeft GreenSoli
12、d1Anlr.AmplLeft -120 +20 -100 -80 -60 -40 -20 +0 d B V -1000.000+0-900-800-700-600-500-400-300-200-100 dBV PROCESSBYPASS Dynamics test On PC: -Load file: alfacomp_dyn (APWin File menu / Open / Test ) Test Connections: -Output A of Audio Precision System Two - LEFT input of the device under test. On
13、the Alphacomp: -Turn on the power switch. -Set INPUT volume to maximum. -Set OUTPUT volume to maximum. -Set PROGRAM to AGC PURE. -Set VARIATION to 1. Start the sweep (F9) and control the results (Page3 Graph) in the following conditions: -LEFT output of the device under test - A input of Audio Preci
14、sion System Two / hardware bypass switch pressed. -RIGHT output of the device under test - B input of Audio Precision System Two / hardware bypass switch pressed. Audio Precision05/22/02 14:17:59 alfacomp_dyn.at2c ColorLine StyleThickDataAxis CyanSolid1Anlr.THD+N RatioLeft GreenSolid1Anlr.Level ARig
15、ht GreenSolid1Anlr.THD+N RatioLeft YellowSolid1Anlr.Level ARight -7.5 +10 -5 -2.5 +0 +2.5 +5 +7.5 d B u -0 16 2 4 6 8 10 12 14 % -26-14-24-22-20-18-16 dBu BYPASS BYPASS PROCESS Stability test On PC: -Load file: alfacomp_stability (APWin File menu / Open / Test ) Test Connections: -Output A of Audio
16、Precision System Two - LEFT input of the device under test. -LEFT output of the device under test - A input of Audio Precision System Two -RIGHT output of the device under test - B input of Audio Precision System Two On the Alphacomp: -Turn on the power switch. -Set OUTPUT volume to maximum. -Set PR
17、OGRAM to AGC PURE. -Set hardware bypass switch to BYPASS (released). -Set VARIATION to 1. Test: Move the input level knob from 0 to maximum 3 times and control the output waveforms: NO PERMANENT SINE WAVEFORMS should be visible. IF PERMANENT WAVEFORMS WITH FREQUENCY 20 kHz should become visible on w
18、hatever output channel, THE UNIT IS TO BE INSPECTED. SEKAKU ELECTRON INDUSTRY CO.,LTD IEBO_P02IEBO_P02 Multi-Level BOM Structure Listing Report No.:IEBO_P02Date2003/08/20 Prepared by000011YAFENPage No.:1/9 Item No.PF00076VersionUNIT:PCS DESCRIPTIOaCOMPDate:2002/04/16 aCOMP_ALTO_230V_ VersionItem NoL
19、oss % Ver.UnitCardinalEffective Date Item DescriptionUsage Rate:Phantom Layer Component RemarkAttrition Rate 0001-MA029181.0000 2002/04/16 panel(white)PCS1N Comp LTO0.00 % 0002-MB016151.0000 2002/04/16 bottom boardPCS1N a verb0.00 % 0003-MC003711.0000 2002/04/16 top coverPCS1N aVERB0.00 % 0004-MB019
20、571.0000 2002/04/16 rear boardPCS1N a verb0.00 % 0005-NI003631.0000 2002/04/16 plastic knobPCS1N 21*160.00 % 0006-NI003623.0000 2002/04/16 plastic knobPCS1N (COOL GRAY 8C/white)0.00 % 0007-NI008963.0000 2002/04/16 knob cover-ABSPCS1N 8.5*4 bule 072C0.00 % 0008-NI003071.0000 2002/04/16 power sw botto
21、mPCS1N 15*120.00 % 0009-NI011601.0000 2002/04/16 power switch capPCS1N 14.5*10 YELLOW C0.00 % 0010-NI003141.0000 2002/04/16 power sw bottomPCS1N 6.5*16(inner 3.3*3.3)black0.00 % 0011-MG0002510.0000 2002/04/16 screwPCS1N M3*60.00 % 0012-MG001632.0000 2002/04/16 Ni-screwPCS1N M3*80.00 % 0013-MG000454.
- 配套讲稿:
如PPT文件的首页显示word图标,表示该PPT已包含配套word讲稿。双击word图标可打开word文档。
- 特殊限制:
部分文档作品中含有的国旗、国徽等图片,仅作为作品整体效果示例展示,禁止商用。设计者仅对作品中独创性部分享有著作权。
- 关 键 词:
- Alto-AComp-comp-sm 电路图 维修手册 Alto AComp comp sm 维修 手册
收音机爱好者资料库所有资源均是用户自行上传分享,仅供网友学习交流,未经上传用户书面授权,请勿作他用。



Marshall-9100-62-02-Schematic电路原理图.pdf

