Marantz-LC-4201-E-Service-Manual 电路图 维修手册.pdf

《Marantz-LC-4201-E-Service-Manual 电路图 维修手册.pdf》由会员分享，可在线阅读，更多相关《Marantz-LC-4201-E-Service-Manual 电路图 维修手册.pdf（107页珍藏版）》请在收音机爱好者资料库上搜索。

1、RadioFans.CN 收音机爱 好者资料库 -1- 1. FORWARD This document defines the design and performance requirements for HYUNDAI IT E-SERIES MODEL 26” ,32”,37”,42”,46” LCD COLOR TV It is capable of displaying maximum 1366X768 resolution image. The LCD TV screen comes equipped with a dedicated terminal board which i

2、s designed to a Accommodate an image signal from a variety of multimedia source such as DVD players,VCRs Camcoders and set-top box,CATV 2. GENERAL DESCRIPTION 2.1 Features 2.1 Features This digital Terrestrial receiver is suited for DVB-T standard reception of Free digital Terrestrial program and ha

3、s the following features; * Full DVB-T compliant * High quality video and CD quality sound by MPEG-2 standard * 3000 pre-programmable station (video:2000ch,audio;1000ch) * User friendly and well defined On Screen Display * Parent lock and favorite select function * EPG(Electronic Program Guide)Funct

4、ion * Full infrared remote control * Automatic scan for added channel * NIT scan function * Manual and automatic scan programming * Display signal strength meter on the screen * Optical connector for SPDIF Output * Output for Audio L/R * PIG (Picture in Graphic) function * High resolution graphic wi

5、th 256 colors * Channel delete, move, edit and add function * Software up grade with RS232C * There are 7 languages OSD as English, Deutsch, Franais, Nederland, Italiano, Espaol, Suomi * A choice of WIDE, ZOOM and advanced 4:3 and 14:9 AUTO size aspect ratios * High luminance and contrast ratio, low

6、 reflection and wide viewing angle * PIP (Picture-In-Picture) * Auto Volume Limit * Noise Reduction * Sound Mode Setting(7 Equalizer : 100Hz,3200Hz,1.0KHz, 3.0KHz,10KHz) * Picture Mode Setting Marantz Technical Service Manual RadioFans.CN 收音机爱 好者资料库 * Full multimedia capability * TELETEXT(252pages :

7、 only ATV) 2.3 General Specification 2.3 General Specification The LCD TV is a Color Active Matrix Liquid Crystal Display with an integral Cold Cathode Flourscent Lamp(CCFL) backlight system. The matrix employs a-Si Thin Film Transistor as the active element. It is a transmissive display type which

8、is operated in the normally black mode. It has a 31.51 inch diagonally measured active display area with WXGA resolution. (768 vertical by 1366 horizontal pixel array) Each pixel is divided into Red, Green and Blue sub-pixels or dots which are arranged in vertical stripes. Gray scale or the luminanc

9、e of the sub-pixel color is determined with a 8-bit gray scale signal for each dot, Therefore it can present a palette of more than 16.7M(true) Colors. It has been designed to apply the 8Bit 1 port LVDS interface. It is intended to support LCD TV, PCTV where high brightness, super wide viewing angle

10、, high color gamut, high color depth and fast response time are important -2- RadioFans.CN 收音机爱 好者资料库 -3- 2.4 General Features( REFER 322.4 General Features( REFER 32”) ) Marantz Technical Service Manual -4- 3. A/V Circuit BLOCK Diagram 3.1 PC Mode P C inputs, R, G, B , H, and V signals, are entered

11、 through D-Sub 15pin (DSUB1). When PC is selected in MCU, the signals are entered into the SCALER, MST-6151DA (USC01). MST6151DA is controlled using the MCU VCT49X3R(US02) Bus line of pin 41/42/43/47/48/49/50. PC input resolution is Fh : 3170k and Fv: 5685Hz, and the maximum input resolution is 1360

12、 x768 at 60Hz. Because MST6151DA Scaler has AD converter, data is operated RGB 24 bits. If the resolution is above the specifications, an out of range message is displayed on the center of the screen. However, even if the resolution is within the specified range, if the input timing is different fro

13、m the timing indicated on the manual, unsupported video, a message can be displayed. The Geometry Adjust function, which is used to adjust the picture position and size, should be carried out in the Windows desktop screen,or full cross hatch. The component signals, 480p, 720p, and 1080i, from the se

14、t-top box with a D-Sub out port, may be has not good image quality. Sound L R signal of pc mode is entered pin117,118 of VCT49X3R. and sound processor is included in VCT49X3R. Ouput Sound signal is outputted through pin 123,124 of MST6151DA ,and then this signal is entered audio amp YDA138E. PC inpu

15、t and DVI input share a single audio jack 3.2 HDMI Mode HDMI inputs (LVDS signal), 8bit, are entered through HDMI 19pin (CNG02). When HDMI is selected by MCU, the LVDS signals are entered into digital port of the SCALER MST-6151DA (USC01). MST6151DA is controlled using the MCU Bus line of pin 41/42/

16、43/47/48/49/50. the maximum resolution is 1360 x768 at 65Hz. If the resolution is above the specifications, an out of range message is displayed on the center of the screen. However, even if the resolution is within the specified range, if the input timing is different from the timing indicated on t

17、he manual, unsupported video, a message can be displayed. In hdmi mode, this model support 480p(60), 576p(50), 720p(50/60), 1080i(50/60) ,and pc timing on the manual. 3.3 COMPONENT Mode Component signals Y, Pb(Cb),Pr(Cr) are entered port0 of mux PI5V330SWE(UC01). mux PI5V330SWE is controlled by mcu.

18、 When pin 1 of mux is low, component signal is outputted, and then Component signals are entered into The SCALER, MST-6151(USC01)DA. The Component signals are composed of 480p (50/60Hz) for SD, 576p(60Hz),720p (50/60Hz) for HD, and 1080i (50/ 60Hz). Component audio signal is entered audio mux TEA642

19、2(UX01). Mux TEA6422 is controlled by SCL,SDA line of MCU VCT49X3R. 3.4 S-Video S-Video signals are entered as Y/ C signals, which is composed of Luminance and color signals. The PAL/SECAM are automatically detected by the video decoders VCT49X3R. video decorder is included in VCT49X3R (US02). Video

20、 signal is operated 656 format( 8bit), and YUV 8bit signal is entered scaler video port. S-Video input and composite video input share a single audio jack. Therefore, while the pictures for the two inputs can be viewed at the same time, only one of the sounds can be heard. S-video and composite audi

21、o signal is entered audio mux TEA6422(UX01). Mux TEA6422 is controlled by SCL,SDA line of MCU VCT49X3R. 3.5 Video Video signal is a composite signal that combines the Luminance (Y) and color (CHROMA) . It is entered to the scaler IC, MST-6151DA (USC01). Video signal is operated 656 format( 8bit) as

22、S-video , and YUV 8bit signal is entered scaler video port. 3.6 Scart Mode Scart mode is separated full scart mode , half scart mode. Full scart mode support CVBS video signal and RGB signal with audio signal. half scart mode support CVBS video signal with audio signal. Y-C Mode Signals is not Suppo

23、rted. pin 8 high will auto select the SCART input. With a voltage range of 4.5V to 7.0V a compatible set will select AV input in 16x9 mode. With a voltage range of 9.5v to 12.0v the set will select AV input in 4x3 mode. pin 16 is used to select between composite or RGB input modes using the same SCA

24、RT. With a voltage of 1-3V DC (with respect to pin 18) RGBS input mode is selected. With a voltage range of 0-0.4V composite mode is selected 3.7 IDTV Mode 3.7 IDTV Mode Marantz Technical Service Manual -5- -6- DTV Y Pb Pr signal is inputted from digital board assy . DTV signals Y, Pb(Cb),Pr(Cr) are

25、 entered port1 of mux PI5V330SWE(UC01). mux PI5V330SWE is controlled by mcu. When pin 1 of mux is high, dtv signal is outputted, and then dtv signals are entered into The SCALER, MST-6151(USC01)DA. dtv signals are composed of 576i. dtv audio signal is entered audio mux TEA6422(UX01). Mux TEA6422 is

26、controlled by SCL,SDA line of MCU VCT49X3R. 3.8 Analog TV Mode 3.8 Analog TV Mode Rf signal from tuner(UX02) is generated IF. And IF signal is entered saw filter TFS96F(US01) Output signal from saw filter is entered VCT49X3R. this signal is separated CVBS video and audio signal in VCT49X3R. 3.9 Supp

27、orted PIP/POP Table SubMain PC HDMI iDTV COMP S-VIDEO VIDEO FScart HScart ANALOG TV PC X X X X O O O O O HDMI X X X X O O O O O iDTV X X X X O O O O O COMP X X X X O O O O O S-VIDEO O O O O X X X X X VIDEO O O O O X X X X X FScart O O O O X X X X X HScart O O O O X X X X X ANALOG TV O O O O X X X X

28、X X: Not supported, O: Supported 3.10 Scaler Output Scaler output signals is R, G, B (each 8bits) LVDS signal . This signal sent to the logic B/D in the LCD module. 3.11 Audio part Audio input port for each mode: Input Port Remark PC /HDMI RCA L/R 1EA Shared Scart Scart Jack L/R Full and half CVBS /

29、S-Video RCA L /R 1EA PAL COMPONENT RCA L /R 2EA Audio input signal for PC/HDMI,COMPONENT,S-VIDEO,SCART and CVBS modes is entered into the audio processor IC(VCT49X3R), The audio processor (VCT49X3R) to control volume, and left/right balance and mono/stereo and Sound effect. The L/ R audio signal sen

30、t by VCT49X3R is amplified in the amplifier, YDA138E (UAU01),and sent to the speaker. YDA138E Support 10W(based on impedance 8 ohm of output for L/R). 4. To use Service Mode 4.1 ENTERED INTO AGING MODE 1) REMOCON CONTROL SET UP :MENU + S. MODE + SLEEP + MUTE Then go to number 5 Then go to number 3(A

31、ging Option) ON SET UP REMOVE :EXIT 4.2 CHECKING MCU VERSION 1) REMOCON CONTROL - SET UP :MENU + S. MODE + SLEEP + MUTE Then You will see MCU VERSION - GO TO Number 6 4. 3 FACTORY RESET 1) REMOCON CONTROL - SET UP :MENU + S. MODE + SLEEP + MUTE Then go to number 7(FACTORY RESET) - PRESS ENTER AND RI

32、GHT KEY Marantz Technical Service Manual -7- -8- 4. 4 IN CASE DTV Go to DTV Source Then Press MENU and move DTV CHANNEL and move FACTORY SET and Press ENTER 4.5. Exit Service menu - press exit key 5.Trouble Shooting Guide CHECK UP10 MD1.8V?(IN USE MD) TROUBLE IN UP09,USC01 CHECK UP09 D1.8V? CHECK R4

33、5,R44 (D5V D12V?) CHECK END NO NO NO YES YES TROUBLE IN UP10 UMD01 DTV B/D CHECK TROUBLE IN CON2 YES YES Marantz Technical Service Manual -9- -10- NO POWER CHECK PANEL AND LVDS CABLE PANEL AND LVDS TROUBLE IN UP01 PIN2 OF CNP01 CHECK US02 OUTPUT? TROUBLE IN US02 NO NO NO NO YES YES YES YES NO RASTER

34、 TROUBLE IN PANEL OR UP01 CHECK PANEL VCC OR BL_ON? YES CHECK USC01 OUTPUT? TROUBLE IN USC01 CHECK END -11- CHECK ICDT2 2.5V?, TROUBLE IN U3 CHECK ICDT1 (3 3V)? TROUBLE IN T1 U3,U4,U5 CHECK 33V CHECK END NO NO NO YES YES YES TROUBLE IN TUNER CHECK RX,TX CHECK T1,U3 JP5 YES YES NO NO TROUBLE IN CON02

35、 PIN2 U3,UG05 TROUBLE IN TUNER JP5,U3,T1 Marantz Technical Service Manual -12- AUDIO SOUND INPUT? TROUBLE IN INPUT AUDIO MUX UX01 TROUBLE IN US02 AUDIO AMP UAU01 TROUBLE IN AUDIO AMP UAU01 OR AMP VCC NO NO NO NO YES YES YES YES NO SOUND TROUBLE IN AUDIO MUX UX01 CHECK US02 INPUT OR OUTPUT YES CHECK

36、MUTE VOLUME TROUBLE IN MUTE OR VOLUME OR SPEAKER CABLE CHECK END NO Marantz Technical Service Manual -13- 6. TV/ VIDEO System 6.1 Front 6.1 Front End(Tuner/Demodulator) End(Tuner/Demodulator) Input Frequency Range : VHF 174230Mhz:ch5ch12 230470Mhz:ch71ch99 UHF 470860Mhz :ch21ch69 RF Input(for aerial

37、)connector : female IEC 169-2 Channel bandwidth German : 8Mhz/7Mhz (combine UHF/VHF) Others : 8Mhz (UHF only) Input Impeadance 75ohms OFDM Spectrum 2k and 8k carrier non hierarchical Modulation Mode 16QAM,64QAM Guard Interval Modes 1/32,1/16,1/8,1/4 active symbol duration FEC Modes Rate 1/2, 2/3, 3/

38、4, 5/6, 7/8 6.2 Transport Demultiplexer 6.2 Transport Demultiplexer Demultiplexer According to ISO/IEC 13818-1 Max.Input Stream 60Mbps(serial)/7.5Mbps(parallel) PID Handling Capability 32PID SI Filtering According DVB-SI Spec.(ETS 300 468) 6.3 ATV STANDARD 6.3 ATV STANDARD - TV system : PAL B/G, D/K

39、, I, L, M - RF signal : VHF, UHF, CABLE TV - Sound modulation: AM/FM-Mono, FM-Stereo (A2, D/K), NICAM - Color system : PAL, SECAM * APPLICATION Receiving System : (PAL STANDARD SYSTEM ) Channel VHF : Low BAND : E2(48.25MHz) S6(140.25MHz) High BAND : S7(147.25MHz) S36(423.25MHz) UHF BAND : S37(431.25

40、MHz) C57(863.25MHz) Intermediate Frequency PIF : 38.9MHz (PAL B/G, I, D/K, SECAM L) 33.9MHz (SECAM L) SIF : 33.4MHz (B/G), 32.9MHz( I), 32.4MHz( D/K ) 40.4MHz (SECAM L) -14- Input Impedance : UHF/VHF Terminal (75) , Unbalanced Band Change Over System : (PLL Control System) Tuning System : (Electroni

41、c Tuning System With PLL) 6.4 Power Indicator LED The LCD TV shall make use of an LED type indicator located on the front of the LCD TV. The LED Color shall indicate the power states as follows. * Power ON-LED is Green * Power Off(Stand-by)- LED is Red( 1.8 watts) 6.5 Signal Input / Output specifica

42、tion Parameter Specification Unit Remarks Impedance 8(L) + 8(R) Speaker Output 10 W Freq. Character 0.1 12 KHz T.H.D 10 % HUM 1 V Audio Output 10(L) + 10(R) W Max 125+10% W NOTE 1 Power Consumption ST-BY 2.0 W Composit Video Input 1 Vp-p RGB 0.7 Vp-p Full CVBS 1 Vp-p Scart Input Half CVBS 1 Vp-p Y 1

43、 Vp-p S- Video Input C 0.286 Vp-p Y 1 Vp-p Pb 0.7 Vp-p COMP Pr 0.7 Vp-p 1920 * 1080i 1280 * 720p 720 * 576p Y 1 Vp-p Pb 0.7 Vp-p Component Input DTV Pr 0.7 Vp-p 720 * 576p RGB 0.7 Vp-p H Frequency 31 70(TTL Level) KHz PC Input V Frequency 56 85(TTL Level) Hz VGA XGA UDM corresponds to the data on DQ

44、8-Q15 UDQS, LDQS I/O Data Strobe: Output with read data, input with write data. Edge aligned with read data, centered in write data. Used to capture write data. LDQS corresponds to the data on DQ0-Q7; UDQS corresponds to the data on DQ8-Q15 DQ0 DQ15I/OData input / output pin : Data Bus VDD/VSSSupply

45、Power supply for internal circuits and input buffers. VDDQ/VSSQSupplyPower supply for output buffers for noise immunity. VREFSupplyReference voltage for inputs for SSTL interface. NCNCNo connection. -33- Marantz Technical Service Manual K4S643232H CMOS SDRAM 3 - SDRAM 64Mb H-die (x32) The K4S643232H

46、 is 67,108,864 bits synchronous high data rate Dynamic RAM organized as 4 x 524,288 words by 32 bits, fabricated with SAMSUNG s high performance CMOS technology. Synchronous design allows precise cycle control with the use of system clock. I/O transactions are possible on every clock cycle. Range of

47、 operating frequencies, programmable burst length and programmable latencies allow the same device to be useful for a variety of high bandwidth, high performance memory system applications. 512K x 32Bit x 4 Banks ? JEDEC standard 3.3V power supply ? LVTTL compatible with multiplexed address ? Four banks operation ? MRS cycle with address key programs -. CAS latency (2 the byte-wide (x8) data ap- pears on DQ7Q0. This device requires only a single, 3.0 volt