Rotel-RX-1052-V03-OM 电路图 维修手册.pdf
《Rotel-RX-1052-V03-OM 电路图 维修手册.pdf》由会员分享,可在线阅读,更多相关《Rotel-RX-1052-V03-OM 电路图 维修手册.pdf(26页珍藏版)》请在收音机爱好者资料库上搜索。
1、Owners Manual RX-1052 AM/FM Stereo Receiver RadioFans.CN 收音机爱 好者资料库 2RX-1052 AM/FM Stereo Receiver 10 cm 4 in 10 cm 4 in 10 cm 4 in 10 cm 4 in This symbol means that this unit is double insulated. An earth or ground connection is not required. Rotel products are designed to comply with international
2、 directives on the Restriction of Hazardous Substances (RoHS) in electrical and electronic equipment and the disposal of Waste Electrical and Electronic Equipment (WEEE). The crossed wheelie bin symbol indicates compliance and that the products must be appropriately recycled or processed in accordan
3、ce with these directives. RadioFans.CN 收音机爱 好者资料库 3English 1: Front Panel Controls 2: RR-AT96 Remote Control RR-AT96 PHO V1V2V3V4 CDTUNTP MUTE SPEAKER DIRECT LABELENTER MONOMEM TPTAPTY CHARACTER BAND ZONESEL DISP RANDOM T/P TUNING VOLUME T RadioFans.CN 收音机爱 好者资料库 4RX-1052 AM/FM Stereo Receiver Impor
4、tant Safety Instructions WARNING: There are no user serviceable parts inside. Refer all servic- ing to qualifi ed service personnel. WARNING: To reduce the risk of fi re or electric shock, do not expose the unit to moisture or water. Do not expose the unit to dripping or splash- ing. Do not place ob
5、jects fi lled with liquids, such as vases, on the unit. Do not allow foreign objects to get into the enclosure. If the unit is exposed to moisture, or a foreign object gets into the enclosure, immediately discon- nect the power cord from the wall. Take the unit to a qualifi ed service per- son for i
6、nspection and necessary repairs. WARNING: The master power switch is located on the rear panel. The unit must be located in the open area allowing unobstructed access to this power switch. Read all the instructions before connecting or operating the component. Keep this manual so you can refer to th
7、ese safety instructions. Heed all warnings and safety information in these instructions and on the product itself. Follow all operating instructions. Clean the enclosure only with a dry cloth or a vacuum cleaner. Do not use this unit near water. You must allow a minimum 10 cm or 4 inches of unobstru
8、ct- ed clearance around the unit. Do not place the unit on a bed, sofa, rug, or similar surface that could block the ventilation openings. If the unit is placed in a bookcase or cabinet, there must be ventilation of the cabinet to allow proper cooling. Keep the component away from radiators, heat re
9、gisters, stoves, or any other appliance that produces heat. The unit must be connected to a power supply only of the type and voltage specifi ed on the rear panel. (USA: 120 V/60Hz, EC: 230V/50Hz) Connect the component to the power outlet only with the supplied power supply cable or an exact equival
10、ent. Do not modify the supplied cable. Do not defeat grounding and/or polarization safety provisions. A polarized plug has two blades, with one wider than the other. A grounding plug has two blades plus a third grounding prong. These are provided for your safety. If the supplied plug does not fi t y
11、our outlet, please consult an electrician for replacement of the obsolete outlet. Do not use extension cords. The main plug of the power cordset is a disconnect device of the appara- tus. In order to completely disconnect the apparatus from the supply mains, the main plug of the power cordset should
12、 be unplugged from the mains (AC) outlet. The stand-by LED indicator will not be lit up to show the power cord is unplugged. Do not route the power cord where it will be crushed, pinched, bent, exposed to heat, or damaged in any way. Pay particular attention to the power cord at the plug and where t
13、he cord exits the back of the unit. The power cord should be unplugged from the wall outlet during a lightning storm or if the unit is to be left unused for a long period of time. Use only accessories specifi ed by the manufacturer. Use only with a cart, stand, rack, bracket or shelf system recommen
14、ded by Rotel. Use caution when moving the unit in a stand or rack to avoid in- jury from a tip-over. Use Class 2 wiring for speaker connections to ensure proper installation and minimize the risk of electrical shock. Immediately stop using the component and have it inspected and/or ser- viced by a q
15、ualifi ed service agency if: The power supply cord or plug has been damaged. Objects have fallen or liquid has been spilled into the unit. The unit has been exposed to rain. The unit shows signs of improper operation The unit has been dropped or damaged in any way Notice The COMPUTER I/O connection
16、should be handled by authorized person only. FCC Information This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential
17、 installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instruction, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particu- lar installati
18、on. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: Reorient or relocate the receiving antenna. (TV, ra
19、dio, etc.) Increase the separation between the equipment and receiver Connect the equipment to an outlet on circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for additional help. Caution This device complies with part 15 of the F
20、CC Rules operation is subject to the following to conditions: (1) This device may not cause harmful interfer- ence, and (2) this device must accept any interference received, including interference that may cause undesired operation. NOTE TO CATV SYSTEM INSTALLER: Call the CATV system or antenna ins
21、tallers attention to Article 820-40 of the NEC. This provides guidelines for proper grounding and, in particular, specifi es that the cable ground shall be connected to the grounding system of the building, as close to the point of cable entry as practical. See installation diagram. NOTE: This equip
22、ment has been tested and found to comply with the lim- its for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against interference in a residential installation. This equipment generates and can radiate ra- dio frequency ene
23、rgy and, if not installed and used in accordance with the instructions, may cause interference to radio or TV communications. There is no guarantee that interference will not occur in a particular installation. If this equipment does cause interference to radio or television reception, which can be
24、determined by turning the equipment off and on, try to cor- rect the interference by one or more of the following measures: Reorient or relocate the receiving antenna. Increase the separation between the unit and the television tuner. Connect the unit to an AC power outlet on a different electrical
- 配套讲稿:
如PPT文件的首页显示word图标,表示该PPT已包含配套word讲稿。双击word图标可打开word文档。
- 特殊限制:
部分文档作品中含有的国旗、国徽等图片,仅作为作品整体效果示例展示,禁止商用。设计者仅对作品中独创性部分享有著作权。
- 关 键 词:
- Rotel-RX-1052-V03-OM 电路图 维修手册 Rotel RX 1052 V03 OM 维修 手册
收音机爱好者资料库所有资源均是用户自行上传分享,仅供网友学习交流,未经上传用户书面授权,请勿作他用。



Marshall-9100-62-02-Schematic电路原理图.pdf

