Tascam_e_cd-500_500b_fw-update_vb 电路图 维修手册.pdf

《Tascam_e_cd-500_500b_fw-update_vb 电路图 维修手册.pdf》由会员分享，可在线阅读，更多相关《Tascam_e_cd-500_500b_fw-update_vb 电路图 维修手册.pdf（2页珍藏版）》请在收音机爱好者资料库上搜索。

1、TASCAM CD-500/500B 1 CD-500/500B Confirmation of firmware version Confirm the firmware version of your CD-500/500B before conducting a firmware update. 1 Turn the units power ON. 2 Enter menu mode, and select the 21 INFO menu item. For details, see the “Menu operation basics” section of the “4 Menu”

2、 chapter in the CD- 500/500B Owners Manual. 3 Press the PITCH MENU knob on the main unit or the ENTER button on the remote control to show the system firmware version on the display. VersionBuild number If the firmware version shown here is the same or newer than the firmware version that you planne

3、d to update to, then there is no need to update it. Firmware update procedures Prepare a completely blank CD-R or CD-RW and a computer that can create a data CD. CAUTION Be very careful not to cut the power to the unit during firmware updating. If the power should be interrupted during firmware upda

4、ting, the unit could become unstartable or otherwise damaged. 1 Download the file Download the latest firmware from the TEAC Global Site (http:/teac- If the downloaded file is in ZIP format or another compressed file type, save it on the desktop or another location on the computer, decompress it and

5、 write it to a CD-R or CD-RW disc. An error might occur if you write it to a CD-R or CD-RW disc using Explorer or another application without decompressing it first. 2 Create a data CD for updating the unit Write the downloaded firmware files to the disc. (V1.18, for example, uses 8 firmware files:

6、C5B00118.upd, C5C00118. upd, C5D00118.upd, C5M00118.upd, C5R00118.upd, C5R10118.upd, C5S00118.upd, C5S10118.upd) Use ISO 9660 Level 1 (MS-DOS-compatible) Disc At Once format to write the CD-R or CD-RW. In Windows Vista and later versions of Windows, writing to a CD-R or CD-RW disc without using a wr

7、iting application is possible. When writing to a CD-R or CD-RW disc without using a writing application, select With a CD/DVD player (mastered). 3 Update the firmware 1) Turn the units power on. 2) Confirm that no disc appears on the display. While pressing and holding both the SEARCH m A.CUE and SE

8、ARCH , A.READY buttons on the unit, press the EJECT button. 3) Confirm that UPDATE IN appears on the display, and insert the update data CD. 4) Press the units PITCH MENU knob once to show OLD XXXX (current version) on the display. Press it again repeatedly to show NEW XXXX (update version), followe

9、d by SURE and then UPDATE to start updating. Current version Update version Update confirmation Updating in progress 5) After updating completes, COMPLETE appears on the display. 6) Press the EJECT button to eject the update data CD, and then turn the power off. 4 Confirmation of firmware version Fo

10、llow the “Confirmation of firmware version” instructions above to check that the system firmware version is now the most recent version of the firmware. This completes the procedure for updating this unit. RadioFans.CN 收音机爱 好者资料库 CD-500/500B 2 TASCAM CD-500/500B Checking the drive firmware version B

11、efore conducting a drive firmware update, check the drive firmware version of your CD-500/500B. 1 Turn the units power ON. 2 After confirming that no disc appears on the display, while pressing and holding the 9 and SHIFT buttons on the main unit, press the PITCH MENU knob to show the drive firmware

12、 version on the display. Drive frmware version If the drive firmware shown here is “3.0D” or “3.2D”, there is no need to update it. Drive firmware update procedures Prepare a completely blank CD-R or CD-RW and a computer that can create a data CD. CAUTION Be very careful not to cut the power to the

13、unit during firmware updating. If the power should be interrupted during firmware updating, the unit could become unstartable or otherwise damaged. 1 Download the file Download the latest firmware from the TEAC Global Site (http:/teac- If the downloaded file is in ZIP format or another compressed fi

14、le type, save it on the desktop or another location on the computer, decompress it and write it to a CD-R or CD-RW disc. An error might occur if you write it to a CD-R or CD-RW disc using Explorer or another application without decompressing it first. 2 Create a data CD for updating the drive Write

15、the downloaded firmware to a disc. Write a CD-R or CD-RW disc using ISO 9660 Level 1 (MS-DOS compatible) Disc at Once format. In Windows Vista and later versions of Windows, writing to a CD-R or CD-RW disc without using a writing application is possible. When writing to a CD-R or CD-RW disc without

16、using a writing application, select With a CD/DVD player (mastered). 3 Update the firmware 1) Turn the units power on. 2) After confirming that no disc appears on the display, while pressing and holding both the STOP and CALL buttons, press the EJECT button. If the drive is subject to update, DRV UP

17、DATE will appear on the display. NOTE If the drive is not subject to update, DRV UP- DATE will not appear on the display. In this case, the following update procedures are not necessary. 3) After confirming that DRV UPDATE appears on the display, insert the drive firmware update data CD. After the d

18、ata has completed loading, the disc will be ejected. Remove the disc when this occurs. 4) Press the main unit PITCH MENU knob repeatedly to view, in order, OLD XXXX (current version), NEW XXXX (update version) SURE (confirming you want to update) and UPDATE (updating starts). Current drive firmware

19、version Update drive firmware version Update confirmation Updating in progress The update takes about 40 seconds to complete. 5) When the update completes and COMPLETE appears on the display, turn the unit off. 4. Confirm the drive firmware version Referring to “Checking the drive firmware version”, confirm that the drive firmware version is now the latest one. This completes the drive update. RadioFans.CN 收音机爱 好者资料库