Kenwood-VR-405-Service-Manual电路原理图.pdf

《Kenwood-VR-405-Service-Manual电路原理图.pdf》由会员分享，可在线阅读，更多相关《Kenwood-VR-405-Service-Manual电路原理图.pdf（37页珍藏版）》请在收音机爱好者资料库上搜索。

1、AUDIO VIDEO SURROUND RECEIVERKRF-V4530DKRF-V5030D/V5030DE/V5030D-SKRF-V6030D/V6030DE/V6030D-SVR-405/406/414SERVICE MANUAL2000-1/B51-5597-00 (K/K) 3493ASPEAKERSBSTANDBYPOWERLISTEN MODESOUNDSOURCE DIRECTAUTOBANDMEMORYINPUT SELECTORVOLUME CONTROLUPDOWNPROLOGIC3 STEREODOLBY DIGITALINPUT MODESET UPDIMMER

2、MONITORPHONESON/STANDBYONOFF6CHINPUTFOR EXTRADIGITALAUDIO FORMATMULTI CONTROLOPTICALDVDCD/DVDVIDEO VIDEO 2COAXIALDIGITAL INVIDEO 1PLAY INREC OUTSYSTEM CONTROL +FRONT SPEAKERS(8 16)CENTER SPEAKERS(8 16)SUB WOOFER PRE OUT+FRONT SPEAKERSSURROUND SPEAKERSAC OUTLET(8 16)(8 16)REDBLUEGREENFM75 GNDAMMONITO

3、RPLAY INPLAY INREC OUTAUDIOLRMD/TAPE1CD/DVDPHONOGNDREC OUTFRONTLCENTERSURROUNDSUB WOOFERDVD/6ch INPUTRKnob(K29-7688-03)Front glass(B10-3550-02)Panel (A60-1757-11)Knob (K29-7679-04)Knob (K29-7682-14)Knob (K29-7676-12)Knob (K29-7688-03)Knob (K27-2385-04)Pin jack (E63-1139-05)Pin jack(E63-1080-05)Minia

4、ture phone jack(E11-0293-05)Metallic cabinet(A01-3734-01)Power cord bushing(J42-0083-05)ACpower cord(E30-2942-05)Lock terminal board (E20-0321-05)Pin jack(E63-1143-05)Pin jack(E63-1146-05)Screw terminal board (E70-0049-05)Lock terminal board (E70-0057-05)AC outlet (E03-0149-05)Illust. is KRF-V6030D-

5、S(M).70%Pin jack(E63-1141-05)Pin jack(E63-1138-05)Optical receiving module(W02-2716-05)Note: On circuit description, please refer to KRF-V7030D service manual(B51-5598-00).Knob (K29-7685-03)Phone jack(E11-0272-05)This manual is divided into four sections, Preparations, Operations, Other, and Remote

6、Control. Remote Control (Separate booklet) (VR-407/VR-406/KRF-V7030D/KRF-V6030D only)Includes the “Quick Start Guide,” which shows you how to operate other components using the remote control, as well as a detailed explanation of all remote control operations. Once you have registered your compo-nen

7、ts with the proper setup codes, youll be able to operate both this receiver and your other AV components (TV, VCR, DVD player, LD pla-yer, CD player, etc.) using the remote control supplied with this receiver. The manual covers the VR-407, VR-406, VR-405, VR-414, KRF-V7030D, KRF-V6030D, KRF-V5030D,

8、and KRF-V4530D. Items suchas functions, number of jacks, and remote control details differ some-what between these models. To confirm the functions available on themodel you have purchased, refer to the table below.Model nameRemoteTerminalControlSpeaker outVIDEO 3 jacksFront inputVR-407RC-R06092 sys

9、temsEquippedEquippedKRF-V7030D(A, B)VR-406RC-R06092 systemsNot equippedNot equippedKRF-V6030D(A, B)VR-405/414RC-R05091 systemNot equippedNot equippedKRF-V5030D/V4530DMemory back up functionPlease note that the following items will be deleted from the units memory if the power cord is disconnected fr

10、om the AC outlet for approximately 3 days. Power mode. Input selector settings. Device preset. Picture output. Speaker ON/OFF Volume level. BASS, TREBLE, INPUT level. Subwoofer ON/OFF. Dimmer level. Monitor ON/OFF. MD/TAPE settings. 6CH/2CH input setting. Listen mode setting. Speaker settings. Input

11、 mode setting. Midnight mode setting. Broadcast band. Frequency setting. Preset stations. Tuning mode.VIDEO 2/MONITOR jacks (for VR-406/405/414/KRF-V6030D/V5030D/V4530D)The receivers VIDEO 2/MONITORjacks can be used in two differentways. Make the appropriate setting for the component connected tothe

12、 jack when the receiver is turned on.Use as a VIDEO 2 jackYou can connect a video deck or the like to these jacks and performvideo playback and recording. The initial factory setting is “VIDEO 2”.Use as a MONITOR jackYou can connect a cassette deck or the like to these jacks and makeuse of the decks

13、 monitoring function during recording. Alternately,you can connect a graphic equalizer to these jacks to apply compen-sation to the music signal.To use the VIDEO 2/MONITORjacks as MONITORjacks, hold downthe MONITORkey of the main unit for more two seconds so that theindication shown below appears. A

14、t the same time the setting is switched to “MONITOR,” the audio input source switches to tuner and the video input source switches to VIDEO 1. To switch the setting back to “VIDEO 2,” once again hold down the MONITORkey for two seconds or more.TUNEDAUTOFMMHz AMkHzPRO LOGIC3 DOWN MIXDIGITALS.DIRECTDS

15、PAUTO SOUNDLFECSRSLSTI.VOLBCLIPMUTERDSEONPTYTPTANEWSSTEREOST.MEMOSWRLSPAMONITORMONITORResetting the MicrocomputerIf the microcomputer may malfunction (unit cannot be operated,or shows an erroneous display) if the power cord is unpluggedwhile the power is ON, or due to some other external factor. If

16、thishappens, execute the following procedure to reset the micro-computer and return the unit to its normal operating condition.Unplug the power cord from the wall outlet, then plug itback in while holding down the POWER key.Please note that resetting the microcomputer will clear the contentsof the m

17、emory and returns the unit to the state it was in when it leftthe factory.With the power cord plugged in, turn the POWER keyOFF. Then, while holding down the ON/STANDBY key,press POWER.For U.S.A. and CanadaFor other countriesMODELABBPOWER SUPPLYPOWER AMPPREAMPDISPLAYKRF-V4530DE4-X07-3142-71X08-3010-

18、11X14-7122-72KRF-V5030DE1-X07-3142-71X08-3010-11X14-7122-72KRF-V5030DT5-X07-3140-51X08-3010-11X14-7122-72KRF-V5030DY5X00-3000-20X07-3142-91X08-3010-11X14-7120-22KRF-V5030D-SE3-X07-3142-71X08-3010-11X14-7122-72KRF-V5030D-SI5X00-3000-20X07-3140-21X08-3010-11X14-7120-22KRF-V5030D-SM5X00-3000-20X07-3140

19、-21X08-3010-21X14-7120-22KRF-V5030D-SX5-X07-3140-71X08-3010-11X14-7120-72KRF-V5030DEE2-X07-3142-71X08-3010-11X14-7122-72VR-405K5-X07-3140-10X08-3010-10X14-7120-11VR-405P5-X07-3140-10X08-3010-10X14-7120-11VR-414K4-X07-3140-11X08-3010-10X14-7120-11VR-414P4-X07-3140-11X08-3010-10X14-7120-11KRF-V6030DE6

20、-X07-3132-72X08-3010-10X14-7122-71KRF-V6030D-SI6X00-3000-20X07-3130-22X08-3010-10X14-7120-21KRF-V6030D-SM6X00-3000-20X07-3130-22X08-3010-21X14-7120-21KRF-V6030D-SX6-X07-3130-72X08-3010-10X14-7120-71KRF-V6030DEE7-X07-3132-72X08-3010-10X14-7122-71VR-406K6-X07-3130-11X08-3010-10X14-7120-10VR-406P6-X07-

21、3130-11X08-3010-10X14-7120-10Model vs PCBKRF-V4530D/V5030D/V6030D/VR-405/406/4142CONTENTS / ACCESSORIES /CAUTIONSCONTENTS / ACCESSORIES / CAUTIONS.2CONTORLS.3BLOCK DIAGRAM.5CIRCUIT DESCRIPTION.6ADJUSTMENT.8PC BOARD.10SCHEMATIC DIAGRAM.17EXPLODED VIEW.33PARTS LIST.34SPECIFICATIONS.46ContentsCautionsF

22、M indoor antenna (1)(T90-0836-05)For VR-406 and KRF-V6030DFor VR-405, VR-414, KRF-V5030D, and KRF-V4530DRemote control unit (1)(A70-1330-05): RC-R0609(A70-1331-05): RC-R0610(E type)Batteries (R6/AA) (2)Remote control unit (1)(A70-1328-05): RC-R0509(A70-1329-05): RC-R0510(E,T type)*AC plug adaptor (1

23、)(E03-0115-05)*Use to adapt the plug on the power cord to the shape of the wall outlet. (Accessory only for regions where use is necessary.)Batteries (R6/AA) (2)AM loop antenna (1)(T90-0852-05)Battery cover (A09-1178-08)Battery cover (A09-1178-08)AccessoriesCopy frominstructionmanual.KRF-V4530D/V503

24、0D/V6030D/VR-405/406/4143CONTROLS7 B. BOOST keyUse to select the maximum adjustmentsetting for the low frequency range.RECEIVER keyUse to return to the operation of the re-ceiver.8 DISC SKIP keyIf CD is selected as the input source, this keyfunctions as the multi-CD player disc skipkey.A/B keyIf TAP

25、E is selected as the input source, this(A and B) of a double cassette deck.+100 keyUse to select the disc number with themulti-CD player.TITLE keyUse to operate other components.9 INPUT SELECTOR keys (DVD, PHONO,CD/DVD, TUNER, MD/TAPE, VIDEO1,VIDEO2, VIDEO3, AV AUX)Selects the inputs and sets the re

26、motecontrol to operate the component regis-tered at the respective input.0 MUTE keyUse to temporarily mute the sound.! POWER keyUse to turn the receiver on and off. POWER key (TV, VCR, DVD, DSS/CDR,CABLE)Use to turn the other components on andoff.# ENTER keyUse to operate other components.2 keyIf ta

27、pe is selected as the input source, thiskey functions as the play key for side B ofthe cassette (the side facing away from thefront of the deck).$ BAND keyUse to select the broadcast band.6 keyIf CD is selected as the input source, thiskey functions as the play/pause key.If MD is selected as the inp

28、ut source, thiskey functions as the play key.% AUTO keyUse to select the auto tuning mode.7 keyIf CD or MD is selected as the input source,this key functions as the stop key. 8 keyUse to operate other components.& INPUT SEL. keyUse to operate other components.* CHANNEL %/ CR keysUse to select the ch

29、annel.( TV SEL. keyUse to operate other components.) VOLUME keysUse to adjust the receiver volume.1 Numeric keysProvide functions identical to those of theoriginal remote control supplied with thecomponent you are controlling.2 LSTN.M keyUse to select the listening mode.RETURN keyUse to operate othe

30、r components.3 SET UP keyUse to select the surround sound settings.MENU keyUse to operate other components.4 SOUND keyUse to adjust the sound quality and ambi-ence effects.OSD keyUse to operate other components.5 MULTI CONTROL keysUsed to make a variety of settings.Use to operate other components.P.

31、CALL /# keysIf tuner is selected as the input source,these keys function as P.CALL keys.4/CR keysIf CD or MD is selected as the input source,these keys function as search keys.6 TUNING 1/CR keysUse to operate the tuner or selected com-ponent.There are some cases in which keys (orknobs) that have the

32、 same function on thereceiver and on the remote control havedifferent names. In the instructions of thismanual, if the names of correspondingkeys (or knobs) on the receiver and remotecontrol are different, the name of the re-mote control key is indicated in parenthe-ses.Remote control unit (RC-R0609

33、) (VR-407/406/KRF-V7030D/V6030D)1B.BOOST DISC SKIP DVDPHONO CD/DVD TUNER MD/TAPEVIDEO1 VIDEO2 VIDEO3 AV AUX23POWERPOWERTVVCRDVDCABLEDSS/CDRRETURNOSDMENUP.CALLTUNINGMUTE VOLUMEA/B+100TITLERECEIVERAUTOINPUT SEL.TV SEL.CHANNELENTER BANDP.CALLMULTI CONTROL4567890 +10 LSTN.MSET UP SOUND1798024356!*)$#%&(

34、CDRCDCLIPDSPTI.VOLTPRDS EON PTYTA NEWSFMAMMHzkHzPRO LOGIC3 STEREODOWN MIXDIGITALS.DIRECTMONITORMEMOST.TUNEDAUTO SOUND AUTOSPLFE SWCABMUTES RSLSRLA SPEAKERS BSTANDBYPOWERMULTI CONTROLMULTI CONTROLLISTEN MODESOUND SOURCE DIRECTAUTOBAND MEMORYINPUT SELECTORVOLUME CONTROLUPDOWNPROLOGIC 3 STEREO DOWN MIX

35、DOLBY DIGITALDTSINPUT MODESET UPS-VIDEO V L AUDIO RAV AUXDIMMER MONITORPHONESON/STANDBYON OFFSTANDBYPOWERON/STANDBYPROLOGIC 3 STEREODOLBY DIGITALSPEAKER MUTEDisplaySpeaker selection indicatorsInput channel indicatorsOutput channel indicatorsBand indicatorsAUTO indicatorMEMO. indicatorST. indicatorTU

36、NED indicator3 STEREO indicatorSTEREO indicatorFrequency display,Input display,Preset channel display,Surround mode displaySpeaker indicatorPRO LOGICindicatorS.DIRECT indicatorMONITOR indicatorDOWN MIX indicatorFor U.S.A.and CanadaMUTE indicatorAUTO SOUND indicator DIGITAL indicatorFor VR-407, KRF-V

37、7030D1 POWER key(Except for U.S.A. and Canada)Use to turn the main power ON/OFF.2 POWER key(For U.S.A. and Canada)Use to turn the power ON/OFF.STANDBY indicator2 ON/STANDBY ( ) key(Except for U.S.A. and Canada)Use to switch the power ON/STANDBY whenthe POWER is turned ON.STANDBY indicator3 MULTI CON

38、TROL knob(For VR-407/KRF-V7030D)Used to make a variety of settings.3 MULTI CONTROL keys(For VR-406/405/414/KRF-V6030D/V5030D/V4530D)Used to make a variety of settings.4 SET UP keyUse to select the surround sound settings.5 Surround indicatorsCR DTS indicator(For VR-407/KRF-V7030D)Lights when the rec

39、eiver is in the DTS mode.CR DOLBY DIGITAL indicatorLights when the receiver is in the DolbyDigital mode.CR PROLOGIC indicatorLights when the receiver is in thePROLOGIC mode.CR 3 STEREO indicatorLights when the receiver is in the 3 STE-REO mode.CR DOWN MIX indicator(For VR-407/KRF-V7030D)Lights when

40、the receiver is in the DOWNMIX mode.6 INPUT MODE keyUse to switch between the digital and analoginputs.7 DIMMER keyUse to adjust the brightness of the display.Use to select the REC MODE.8 MONITOR keyUse to monitor the source that is connected tothe MONITOR jack.9 VOLUME CONTROL knob0 PHONES jackUse

41、for headphone listening.! SPEAKERS A/B keys(For VR-407/406/KRF-V7030D/V6030D)Use to turn the A/B speakers ON/OFF.! SPEAKER key(For VR-405/414/KRF-V5030D/V4530D)Use to turn the speaker ON/OFF.MUTE key(For VR-405/414/KRF-V5030D/V4530D)Use to temporarily mute the sound. SOUND keyUse to adjust the sound

42、 quality and ambienceeffects.# BAND keyUse to select the broadcast band.$ AUTO keyUse to select the auto tuning mode.% LISTEN MODE keyUse to select the listening mode. MEMORY keyUse to store radio stations in the presetmemory.& SOURCE DIRECT keyUse to pass the source material direct to theamplifier.

43、* INPUT SELECTOR knobUse to select the input sources.( AUX IN S VIDEO/VIDEO/AUDIO L/Rjacks(For VR-407/KRF-V7030D)Standby modeWhile the standby indicator of the unit is lit, a small amount of current is flowing into the units internal circuitry to back up the memory. This condition is referredto as t

44、he standby mode of the unit. While the unit is in the standby mode, it can be turned ON from the remote control unit.For VR-405, VR-414,KRF-V5030D,KRF-V4530DFor VR-406, VR-405, VR-414KRF-V6030D, KRF-V5030D,KRF-V4530DKRF-V4530D/V5030D/V6030D/VR-405/406/4144CONTROLSRemote control unit (RC-R0509) (VR-4

45、05/414/KRF-V5030D/V4530D)7 DISC SKIP keyIf CD is selected as the input source, this keyfunctions as the multi-CD player disc skipkey.A/B keyIf TAPE is selected as the input source, this(A and B) of a double cassette deck.+100 keyUse to select the disc number with themulti-CD player.8 INPUT SELECTOR

46、keys (DVD, PHONO/AUX, CD/DVD, TUNER, MD/TAPE,VIDEO1, VIDEO2)Selects the inputs and sets the remotecontrol to operate the component regis-tered at the respective input.9 MUTE keyUse to temporarily mute the sound.0 POWER keyUse to turn the receiver on and off.! DVD keyUsed to operate DVD player.For de

47、tails, refer to the instruction manualof your DVD player. RECEIVER keyUse to return to the operation of the re-ceiver.# TITLE keyUse to operate other components.$ LISTEN MODE keyUse to select the listening mode.1 Numeric keysIf CD or MD is selected as the input source,these keys function as numeric

48、keys. Iftuner is selected as the input source, thesekeys are used to call up station presets.2 SET UP keyUse to select the surround sound settings.MENU keyUse to operate other components.3 SOUND keyUse to adjust the sound quality and ambi-ence effects.OSD keyUse to operate other components.4 MULTI CONTROL keysUsed to make a variety of