HarmanKardon-HS100-hcs-sm维修电路原理图.pdf

《HarmanKardon-HS100-hcs-sm维修电路原理图.pdf》由会员分享，可在线阅读，更多相关《HarmanKardon-HS100-hcs-sm维修电路原理图.pdf（77页珍藏版）》请在收音机爱好者资料库上搜索。

1、ENGLISH HS 200 Home Cinema System SERVICE MANUAL RadioFans.CN FRONT PANEL CONTROLS 7 ENGLISH Front Panel Controls ?Main Information Display 1Power On/Off (Standby) 2Eject 3USB On-The-Go Input 4Headphone Jack 5Volume Control 6Slot Loader ?Main Information Display:This display delivers messages and st

2、atus indications to help you operate the HS 200 Controller. 1Power On/Off (Standby): Press the button once to turn the HS 200 Controller on, press it again to put the unit in the Standby mode. Note that when the HS 200 Controller is switched on, the Power Indicator around the button turns blue. 2Eje

3、ct: Press this button to release a disc from the loader. 3USB On-The-Go Input:This input may be used to temporarily connect a USB thumb device or portable hard disk for direct playback of audio, image of video files or a USB hub.The USB inputs are designed to power a single USB device at a time. If

4、additional hard disks are connected through a hub it is necessary that additional external power supplies are used to power the hub and hard disks. 4Headphone Jack:This jack may be used to listen to the systems output through a pair of headphones. Be certain that the headphones have a standard 3.5 m

5、m stereo phone plug. Note that the main room speakers will automatically be turned off when the headphone jack is in use. 5Volume Control:Turn this knob clockwise to increase the volume, counterclockwise to decrease the volume. If the system is muted, adjusting volume control will automatically rele

6、ase the unit from the silenced condition. 6Slot loader: Gently insert a CD or DVD into this slot, with the printed side of the disc facing up. Note there is no drawer. Press the Eject Button2to release the disc. RadioFans.CN 8 FRONT PANEL DISPLAY Front Panel Display A Disc Type Indicators B Playback

7、-Mode Indicators C Progressive Scan Indicator D Parental Lock Indicator ETime Indicators FVideo Format Indicators G Source Indicators H Repeat Indicators IVCD Playback Control Indicator J Random Indicator KA-B Repeat Indicator L Program Indicator MAngle Indicator NTitle Indicators O Chapter/Track Nu

8、mber Indicators PVideo Output Indicators A Disc Type Indicators: The CD or DVD indicator will illuminate to show the type of disc currently being played. B Playback-Mode Indicators:These indicators light to show the current playback mode: NLights when a disc is playing in the normal mode HLights whe

9、n the disc is in the Fast Search Forward mode.The on-screen banner display indicates the selected speed (2x, 8x, 16x, 100 x). 1Lights when the disc is paused. GLights when the disc is in the Fast Search Reverse mode.The on-screen banner display indicates the selected speed (2x, 8x, 16x, 100 x). C Pr

10、ogressive Scan Indicator: This indicator lights when the unit sends out a progressive scan signal. D Parental Lock Indicator:This indicator lights when the parental-lock system is engaged in order to prevent anyone from changing the rating level without a code. E Time Indicators:These positions in t

11、he indicator will show the running time of a DVD in play.When a CD is playing, these indicators will show the current track time, time remaining in the current track, or the total remaining time on the disc. NOTE: The Indicators NOE will also display text messages about the DVDs status, including Re

12、adingwhen a disc is loading, STANDBYwhen the unit is turned off, and Disc Errorwhen a disc not compatible with the DVD is put into the play position. F Video Format Indicators:These indicators will represent the video format currently playing. G Source Indicators:These indicators will light to show

13、which source is currently selected. H Repeat Indicators:These indicators light when any of the Repeat functions are in use. I VCD Playback Control Indicator:This indicator lights when the playback control function is turned on with VCDs. J Random Indicator: This indicator lights when the unit is in

14、the Random Play mode. K A-B Repeat Indicator:This indicator lights when a specific passage for repeat playback has been selected. L Program Indicator:This indicator lights when the programming functions are in use. M Angle Indicator: This indicator blinks when alternative viewing angles are availabl

15、e on the DVD currently playing. N Title Indicators: These two positions in the display will show the current title number when a DVD disc is playing. O Chapter/Track Number Indicators:When a DVD disc is playing, these two positions in the display will show the current chapter.When a CD disc is playi

16、ng they will show the current track number. P Video Output Indicators:These indicators will represent the active video output. RadioFans.CN REAR PANEL CONNECTIONS9 ENGLISH Rear Panel Connections ? ? ? ? ? ? ? ? ? ?Composite Video Output ?S-Video Output ?Component Video Outputs ?Scart TV Output ?AC P

17、ower Cord ?FM Antenna ?Audio In ?Subwoofer Output ?Coaxial Digital Input ?Optical Digital Input ?Analog Audio Outputs ?Front Speaker Outputs ?Remote IR Input ?TV Audio In ?Coaxial Digital Output ?Subwoofer Trigger Output ?USB On-The-Go Input ?HDMI Output ?Remote IR Output ?Composite Video Output: Co

18、nnect this jack to the video input on a television or video projector. ?S-Video Output: Connect this jack to the S- Video input on a television or video projector. ?Component Video Outputs:These outputs carry the component video signals for connection to display monitors with component video inputs.

19、 For standard analog TVs or projectors with inputs marked Y/Pr/Pb or Y/Cr/Cb, connect these outputs to the corresponding inputs. If you have a high-definition television or projector that is compatible with high scan rate progressive video, connect these jacks to the “HD Component” inputs. Note that

20、 if you are using a progressive scan display device, then ”Progressive” must be selected in the Video Set-up Menu in order to take advantage of the progressive scan circuitry. See page 20 for more information on progressive scan video. IMPORTANT:These jacks should NOT be con- nected to standard comp

21、osite video inputs. ?SCART OUT (TV): If your TV has a SCART socket, you can connect a SCART cable to your TV and to your DVD Player for improved video quality.The SCART cable carries both audio and video.You can select Composite Video or RGB video for that SCART connectors video output signal. ?AC P

22、ower Cord: Connect this plug to an AC outlet. If the outlet is controlled by a switch, make certain that it is in the ON position. ?FM Antenna: Connect to the supplied FM antenna. ?Audio In: Connect to a line-level analog audio source:TV, tape player, Minidisc, PC, etc. ?Subwoofer Output: Connect to

23、 the SUB/LFE input on the subwoofer. ?Coaxial Digital Input: Connect the coax digital output from a DVD player, HDTV receiver, LD player, MD player, satellite receiver or CD player to this jack.The signal may be either a Dolby Digital signal, DTS signal or a standard PCM digital source. Do not conne

24、ct the RF digital output of an LD player to these jacks. ?Optical Digital Input: Connect the optical digital output from a DVD player, HDTV receiver, LD player, MD player, satellite receiver or CD player to this jack.The signal may be either a Dolby Digital signal, DTS signal or a standard PCM digit

25、al source. ?Analog Audio Outputs: Connect these jacks to the analog audio input on a TV set or external audio system for analog audio playback or to the RECORD/INPUT jacks of an audio recorder for recording. ?Front Speaker Outputs: Connect these outputs to the matching + or terminals on your left an

26、d right speakers. In conformance with the new CEA color code specification, the White ter- minal is the positive, or + terminal that should be connected to the red (+) terminal on Front Left speaker with the older color coding, while the Red terminal is the positive, or + terminal that should be con

27、nected to the red (+) terminal on Front Right speaker. Connect the black () terminals on the HS to the black () terminals on the speakers. See page 14 for more information on speaker polarity. ?Remote IR Input: If the HS 200s front- panel IR sensor is blocked due to cabinet doors or other obstructio

28、ns, an external IR sensor may be used. Connect the output of the sensor to this jack. 10REAR PANEL CONNECTIONS Rear Panel Connections ?TV Audio Input: If your screen is connected to the HS by an HDMI, Component, S-Video or Composite cable, connect the analog output of your TV to this input. If you h

29、ave your TV connected to the HS with a Scart cable, an audio connection to the TV Input is not necessary. Note:Youll find more details about all Audio/Video connections under Setup and Connections on the following pages. ?Coaxial Digital Output: Connect this jack to the matching digital input connec

30、tor on a digital recorder such as a CD-R or MiniDisc recorder. ?Subwoofer Trigger Output: Connect this trigger output to the trigger input of the Harman Kardon subwoofer, so that the subwoofer will switch on and off at the same time as the rest of the system. ?USB On-The-Go Input:This input may be u

31、sed to temporarily connect a USB thumb device or portable hard disk for direct playback of audio, image of video files, a digital photo camera or a USB hub. ?HDMI Output: Connect this output to the HDMI input of high-definition LCD, Plasma or video projector for the best possible picture quality. ?R

32、emote IR Output:This connection permits the IR sensor in the receiver to serve other remote controlled devices. Connect this jack to the “IR IN” jack on Harman Kardon or other compatible equipment. REMOTE CONTROL11 ENGLISH 0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q ? ? ? ? ? ? ? ? ? ? ? ?

33、 ? ? Remote Control Power On/Source Selection Button Power Off Button Subtitle Button Title Button Angle Button Audio Button Enter Button Eject Button Set-Up/OSD Button Arrows Button Mute Button Menu Button Pause Button Status Button Skip/Step (Previous) Button Skip/Step (Next) Button Play Button Se

34、arch/Slow Reverse Button STOP Button Search/Slow Forward Button Macro Buttons Pic +/Pic - Button Zoom Button Playlist Button Random Button A-B Repeat Button Volume up/down Button Light Button Numeric Keys Button Repeat Button Clear Button Video output Button Video format Button Learn Button Screen P

35、ower Buttons Info Button Teletext Buttons Picture in Picture Button Screen Format Button IR Transmitter Window Program Indicator ? C J G F ? ? ? P ? 4 M ? 8 6 B 5 Q A ? ? 1 0 ? L 2 8 9 D O N K ? ? ? 7 E H 3 I ? 12REMOTE CONTROL Remote Control 0Power On/Source Selector Buttons: Pressing one of these

36、buttons will perform three actions at the same time. First, if the HS System is not turned on, this will power up the unit. Next, it will select the source shown on the but- ton as the input to the HS System. Finally, it will change the remote control so that it controls the device selected. 1Power

37、Off Button:Turns off the HS system to standby mode. 2Subtitle Button:When a DVD is playing, press to select a subtitle language or to turn subtitles off. 3Title Button:When a disc is playing, press to make the player go back to the first section of the disc. 4Angle Button: Press to access various ca

38、mera angles on a DVD (If the DVD contains multiple camera angles) or to rotate JPEG images. 5Audio Button: Press to access various audio languages on a DVD (If the DVD contains multiple audio streams). 6Enter Button: Press this button to activate a setting or option. 7Eject Button: Press to release

39、the disc from the loader. 8Set-up/OSD: Press to access the On Screen Display Menu. 9Arrow buttons (M/N/K/L) Buttons: Use to move the cursor in the OSD. AMute Button: Mutes the sound. BMenu Button: Displays the actual DVD Disc Menu on the TV screen in play mode. When playing discs with JPEG images, p

40、ressing this button will access the thumbnails. CPause Button: Freezes a picture (with DVD/VCD) and pauses the playback signal (CD) when a disc is playing. Press again for normal playback. DStatus Button: Press while a disc is play- ing to view banner display. Use the ARROW but- tons to move through

41、 the different features in the Banner Display.When a symbol is highlight- ed, press ENTER on the remote to select it. ESkip/Step (Previous) Button: Press to go to beginning of current track. Press again quickly to go to beginning of previous track.After press- ing the PAUSE button, each press of thi

42、s button will move the image in reverse frame by frame. FSkip/Step (Next) Button: Press to go to beginning of next track.After pressing the PAUSE button, each press of this button will move the image forwards frame by frame. GPlay Button: Begins to play disc (closes disc tray first, if it is open).

43、HSearch/Slow (Rev.) Button:Allows you to search in reverse through a disc while it is in play mode. Each time you press this button, the search speed changes as indicated by a number of arrows on the right top of your screen. After pressing the PAUSE button, each press of this button will change the

44、 slow down speed indicated by a number of arrows in the right top of the screen. IStop Button: Stops playing a disc.When a disc is playing, if you press STOP and PLAY, the disc will resume play, i.e. it will start from the same point on the disc where the unit was stopped. If you press STOP twice an

45、d the PLAY button, the disc will start play from the begin- ning. JSearch/Slow (Fwd.) Button:Allows you to search forward through a disc while it is in play mode. Each time you press this button, the search speed changes as indicated by a number of arrows on the right top of your screen. After press

46、ing the PAUSE button, each press of this button will change the slow down speed as indicated by a number of arrows in the right top of the screen. KMacro Buttons: Press these buttons to store or recall a “Macro”,which is a pre-pro- grammed sequence of commands stored in the remote.(See page 26 for m

47、ore information on storing and recalling macros.). LPic +/Pic - Button: Pressing these buttons in JPEG mode will move to the previous or next image. MZoom Button:When a DVD or VCD is playing, press this button to zoom the picture so that it is enlarged.There are 4 steps to the zoom function, each pr

48、ogressively larger. Press through each of the zoom stages to return to a normal picture.The Zoom function is not available when watching High Definition material. NPlaylist Button: Press this button to change the playback order of the disc. ORandom Button: Press for RANDOM playback in random order.

49、PA-B Button: Press to select section A-B and to play repeatedly. QVolume Up/Down: Increase/ decrease the master volume level. ?LIGHT Button: Press to illuminate remote controller. ?Numeric Keys Button: Select numbers by pressing these buttons. ?Repeat Button: Press to go to the Repeat menu.You can repeat a chapter, track or the entire disc. ?Clear Button: Press to remove the Banner menu from the screen. ?Video output Button: Press to toggle between the S-Video, Component Video Outputs and SCART RGB video output of the HS Sysrem player. Note that the Composite and SCART Compo