《HarmanKardon-MA362-pwr-sm维修电路原理图.pdf》由会员分享,可在线阅读,更多相关《HarmanKardon-MA362-pwr-sm维修电路原理图.pdf(18页珍藏版)》请在收音机爱好者资料库上搜索。
1、 AUDIOACCESS MA-362 TWELVE CHANNEL AMPLIFIER PRELIMINARY SERVICE MANUAL Harman Consumer Group 250 Crossways Park Dr. Woodbury, New York 11797 RadioFans.CN MA-362 Audioaccess Twelve Channel Amplifier The Audioaccess MA-362 Twelve Channel Amplifier represents a high value approach while providing twel
2、ve channels of clean amplifier power for multi-room system applications. Power to Spare With a power rating of 50 Watts per channel at 8 Ohms from 20Hz to 20kHz with less than .05% THD, the MA-362 will drive virtually any in-wall loudspeaker to room filling volume. Power into 4 Ohms is even more imp
3、ressive at 75 Watts per channel. All channels may be bridged if additional power is required. Cool operation is ensured with a design incorporating heat sinks, flow through ventilation and low-noise fans. After a series of careful evaluations and tests, Madrigal has chosen to imple- ment a conservat
4、ive and proven design philosophy with the MA-362 with the added benefit of improved sound quality and long component life. Power for each channel is delivered by a pair of high current output transistors capable of delivering over 200 watts, much higher power than the rated 50 watts per chan- nel. F
5、or example, the output transistors for each channel can handle up to 12 amps. At rated power, the MA-362 is drawing only about 3 amps of current per channel, ensuring its reliable performance. Control Capabilities Each pair of channels is controlled by a Trigger Source Selector, a three-position swi
6、tch that selects signal sensing, voltage trigger input or link (to the trigger signal of the zone to the immediate left) as the source for muting control within each individual zone. A two position Signal Link Selector, is also provided and is used to link a zone to the Signal Input connector of the
7、 zone to its left. Installation Flexibility Ease of installation, a hallmark of all Audioaccess products is maintained in the new MA-362. An external speaker termi- nation board can be ordered in advance to allow the installing dealer to “pre-wire” all of the loudspeakers in the system before the am
8、plifier is delivered for final installa- tion. Final hook up consists of plugging the speaker termination board into a slot in the rear panel of the amplifier. Summary The MA-362 features, performance and reliability make it the perfect amplifier choice for a wide variety of multi-room audio system
9、applications. Simply Ingenious RadioFans.CN A Harman International Company Audioaccess Madrigal Audio Laboratories, Inc. P.O.Box 781 Middletown, CT 06457-0781 Internet: Fax: 860.346.15402002 Madrigal Audio Laboratories, Inc. 20202AA SS/MA-362 Specifications L Rack mountable chassis L Discrete amplif
10、ier design for improved sound quality L Signal Input Connector: six dual RCA jacks, one per two channel L Four position switch to select Stereo, Bridged Right, Bridged Left, or mono operation for each zone L Independent level controls for each amp channel L Trigger Input, euro-style connector, accep
11、ts 3 to 24V AC or DC, to “unmute” amp channels in the zone L Trigger Source Selector: three position switch to select signal sensing, voltage trigger input or link (to the trigger signal of the zone to the immediate left) to control muting in the zone. L Plug-in Speaker Termination Board, a snap for
12、 advance installations (available separately, not included with the amplifier) L Signal Link Selector: two position switch to link a zone to the signal input connector of the zone to its left (excluding zone 1) L Power Switch on Front panel L Bi-color LED Power Indicator Features L Number of Channel
13、s: 12, configured as 6 left/right pairs (zones) L Power Output (Unbridged): 50W 8, 75W 4, 20 - 20k Hz, All Channels Driven L Power Output (Bridged): 150W 8, 20 - 20k Hz, All Channels Driven L THD+Noise: 0.05%, at rated power, 20 - 20k Hz L IMD: 100dB unweighted (ref: Rated Power), unbridged into 8 L
14、 Crosstalk: -70 dB (ref: Maximum Output) between any two channels (no audible crosstalk) L Protection: Short Circuit, Over Current, DC, Thermal L Muting: Turn on, Turn off, Signal Sensing, and Triggered per zone L Input impedance: 24k L Input Sensitivity: 1.0 Vrms (with input trim at minimum attenua
15、tion) L Input Level Trim Range: 20dB L Gain: 26dB Dimensions and weight: L Height: 7 (178 mm) (4 rack spaces, not including feet) L Width front panel: 19 (483 mm), Width chassis: 171116 (450 mm) L Depth: 171116 (450 mm) L Weight: 60 lb (27.2 kg) (without carton) Features, specifications and dimensio
16、ns are subject to change. Audioaccess TI-501 Speaker Termination Board (Sold separately) RadioFans.CN FEATURES The Audioaccess MA-362 Twelve Channel Amplifier represents a high value approach while providing twelve channels of clean amplifier power for multi-room system applications. Power to Spare
17、With a power rating of 50 Watts per channel at 8 Ohms from 20Hz to 20kHz with less than .05% THD, the MA-362 will drive virtually any in-wall loudspeaker to room filling volume. Power into 4 Ohms is even more impressive at 75 Watts per channel. All channels may be bridged if additional power is requ
18、ired. Cool operation is ensured with a design incorporating heat sinks, flow through ventilation and low-noise fans. After a series of careful evaluations and tests, Madrigal has chosen to implement a conservative and proven design philosophy with the MA-362 with the added benefit of improved sound
19、quality and long component life. Power for each channel is delivered by a pair of high current output transistors capable of delivering over 200 watts, much higher power than the rated 50 watts per channel. The output transistors for each channel can handle 12 amps of current. At rated power, the MA
20、-362 draws 2.5 amps of current, ensuring ample safe operating area headroom and reliable performance. Zone Muting Control Each pair of channels is controlled by a three-position Trigger Source switch to select signal sensing, voltage trigger or link (to the trigger signal of the zone to the immediat
21、e left). Unique Input Bussing A two position Signal Link switch is also provided for each zone. This allows assignment of direct input to the zone, or to share the source utilized by the zone to its left, eliminating the need for Y-cords to distribute common inputs to multiple zones. Installation Fl
22、exibility Ease of installation, a hallmark of all Audioaccess products is maintained in the new MA-362. An external speaker termination board can be ordered in advance to allow termination of loudspeakers before the amplifier is delivered for final installation. At final, simply plug the speaker ter
23、mination board onto the rear panel of the amplifier. Summary The MA-362 features, performance and reliability make it the perfect amplifier choice for a wide variety of multi-room audio system applications. Specifications: Number of Channels: 12, configured as 6 left/right pairs (zones) Power Output
24、 (Unbridged): 50W 812, 75W 412, 20 - 20k Hz, All Channels Driven Power Output (Bridged): 150W 812, 20 - 20k Hz, All Channels Driven THD+Noise: 0.05%, at rated power, 20 - 20k Hz IMD: 100dB unweighted (ref: Rated Power), unbridged into 812 Crosstalk: -70 dB (ref: Maximum Output) between any two chann
- 配套讲稿:
如PPT文件的首页显示word图标,表示该PPT已包含配套word讲稿。双击word图标可打开word文档。
- 特殊限制:
部分文档作品中含有的国旗、国徽等图片,仅作为作品整体效果示例展示,禁止商用。设计者仅对作品中独创性部分享有著作权。
- 关 键 词:
- HarmanKardon MA362 pwr sm 维修 电路 原理图
收音机爱好者资料库所有资源均是用户自行上传分享,仅供网友学习交流,未经上传用户书面授权,请勿作他用。
HarmanKardon-MA362-pwr-sm维修电路原理图.pdf



Pioneer-A90-Service-Manual电路原理图.pdf


