Icom_IC-450_broch.pdf

《Icom_IC-450_broch.pdf》由会员分享，可在线阅读，更多相关《Icom_IC-450_broch.pdf（2页珍藏版）》请在收音机爱好者资料库上搜索。

1、5W Output pOWer 5 Watts (High) and 1 Watt (Low) Selectable Output Power. 80+ Channels 80 CB Channels plus up to 35 Receive only Channels. nOise CanCelling MiCrOphOne This feature allows clear communication by reducing the surrounding noise, especially the low frequency noise received by the micropho

2、ne. VOiCe reCOrder Can record up to 10 of the latest messages with a total recording time of 5 minutes (30 seconds per message). Built-in speaker Speaker built into the microphone. 12-24V Built in DC to DC converter providing 12 and 24 Volt automatic switching. uhF CB transceiver Made in Japan Gener

3、al Frequency coverage CB: 476.425477.4125 MHz RX: 450.000520.000 MHz (RX only) Mode:8K50F3E Number of channels:Max 128ch/8 banks Antenna impedance: 50 W Input impedance:600 W Output impedance:4 W Intermediate frequency:1st 46.35 MHz, 2nd 450 kHz Operating temperature range: 10C to +60C Power supply

4、voltage: 13.8 or 27.6 V DC nominal (Negative ground) Current drain with HM-212 (approximately) DC 13.8 V: RX stand-by 500 mA RX Maximum audio 1500 mA TX (5 W) 2000 mA DC 27.6 V: RX stand-by 300 mA RX Maximum audio 1000 mA TX (5 W) 1300 mA Dimensions:125 (W) 29 (H) 180 (D) mm (Projections not include

5、d) Weight (approximately):1011 g (with HM-212) transmitter Output power:5 W/1 W (selectable) Modulation system: Variable reactance frequency modulation Max. frequency deviation:2.5 kHz Frequency error:2.5 ppm Spurious emissions:Less than 30 dBm Adjacent channel power: Less than 16 dBm Audio harmonic

6、 distortion:1% typical (60% deviation) Residual modulation:40 dB typical Limiting characteristic of modulator: 70 to 100% of maximum deviation Receiver CB (476.425477.4125 Mhz) Sensitivity (12 dB SINAD): 0.22 V typical Squelch sensitivity: 0.2 V typical (Threshold) Hum and noise:48 dB typical Interm

7、odulation rejection ratio: 72 dB typical Spurious response rejection ratio: 80 dB typical Adjacent channel selectivity: 68 dB typical Conducted spurious radiation: Less than 57 dBm (9 kHz1.0 GHz) Less than 47dBm (1.0 GHz4.0 GHz) Audio output power: 5.0 W typical at 10% distortion with a 4 W load Aud

8、io frequency response: +2 dB to 8 dB of 6 dB/octave from 300 Hz to 2550 Hz (at the 1 kHz reference) rX (450.000520.000 Mhz) (except CB (476.425477.4125 Mhz) Sensitivity (12 dB SINAD): 0.25 V typical Hum and noise:45 dB typical Conducted spurious radiation: Less than 57 dBm (9 kHz1.0 GHz) Less than 4

9、7 dBm (1.0 GHz4.0 GHz) Audio frequency response: +2 dB to 8 dB of 6 dB/octave from 300 Hz to 2550 Hz (at the 1 kHz reference) Other outstanding features Voice Guidance which announces the channel type and number when you select a channel Small and compact for installations where you are limited for

10、space Easy to use Main unit can be mounted out of sight New design, compact controller speaker microphone with newly designed user interface and menu structure. Options Cable OPC-2355extension cable 2.5 m microphone extension cable. Same cable as supplied with the transceiver. Speaker SP-22/SP-35ext

11、ernal speaker Compact and easy to install. Cloning software CS-450cloning software + OpC-1122u usb cloning cable Provides quick and easy entry for items, such as set mode contents, zone type, and so on using the PCs USB terminal. Specifications uhF CB transceiver Unit 1/103 Garden Road, Clayton VIC

12、3168 Australia Phone: (03) 9549 7500 Fax: (03) 9549 7505 Email: .au Icom, Icom Inc. and the Icom logo are registered trademarks of Icom Incorporated (Japan) in the United States, the United Kingdom, Germany, France, Spain, Russia, Australia, Japan and/or other countries. All other trademarks are the properties of their respective holders. 1-1-32 Kami-minami, Hirano-ku, Osaka 547-0003, Japan Phone: +81 (06) 6793 5302 Fax: +81 (06) 6793 0013 www.icom.co.jp/world Your local dealer: 08YD022F 2008-2014 Icom Inc.