Philips-DVD-616-K-Service-Manual(1) 电路图 维修手册.pdf

《Philips-DVD-616-K-Service-Manual(1) 电路图 维修手册.pdf》由会员分享，可在线阅读，更多相关《Philips-DVD-616-K-Service-Manual(1) 电路图 维修手册.pdf（70页珍藏版）》请在收音机爱好者资料库上搜索。

1、 Copyright 2002 Philips Consumer Electronics BPAVC All rights reserved. No part of this publication may be reproduced, stored in a retrieval system or transmitted, in any form or by any means, electronic, mechanical, photocopying, or otherwise without the prior permission of Philips. Published by Ji

2、anfeng Liu 0263 BPAVC DVD616K/031/691/751/782/931 CLASS 1 LASER PRODUCT COMPACT DIGITAL AUDIO DVD PLAYER Service Manual Service Service Service Service Service GB CONTENTS Page 5 Dismantling instruction and exploded view . 4 1 Technical specifications . 2 2 Warnings . 2 3 Service hints . 3 4 Amendme

3、nt . 3 7 Electrical diagrams and print-layouts . 8 8 Spare parts list DVD616K/031 . 24 9 Spare parts list DVD616K/691 . 28 10 Spare parts list DVD616K/751 . 32 11 Spare parts list DVD616K/782 . 36 12 Spare parts list DVD616K/931 . 40 Power board. . 8 Mpeg board. . 10 Front board. . 20 MIC board. . 2

4、2 6 Block- and wiring diagram . 6 3122 785 12050 1 RadioFans.CN 收音机爱 好者资料库 Technical Specifications1. DVD616K/ 031/691/751/782 Specifications 2. Warnings 2 RadioFans.CN 收音机爱 好者资料库 HANDLING CHIP COMPONENTS SERVICE TOOLS 3. Service hints Test discs Audio signals disc -4822 397 30184 Torx screwdrivers

5、Set (straight, T2 to T20) -4822 395 50145 Set (square, T10, T15, T20) -4822 395 50132 3 4. Revision information Service manual version: 1.0 Issue Date : 18th, March, 2002 Revision information: N/A RadioFans.CN 收音机爱 好者资料库 4 5. Dismantling instructions and exploded view DISMANTLING INSTRUCTIONS DVD616

6、K/031/691/751/782/931 See exploded view for item numbers Cover 232 Remove 7 screws 228, 233 Lift cover at rearside to remove Front assy 200 Unlock front from frame by releasing successively snaps Place front assy in front of the set (service position) Display board 1004 Remove 6 screws 211,212 (boar

7、d to front) Demount board Remove volume knob by pulling it forward Remove 2 screws 209 (board to front), pay attention to the earth spring 261 Demount board MIC board 1005Switch assy Remove 2 screws 211 Demount switch assy Loader module 1003 Remove 4 screws 215 (loader to bracket) Demount loader mod

8、ule Remove connections to MPEG and PSU board Remove 2 screws 221 (MPEG board to frame) Remove 5 screws 227 (MPEG board to back plate) Demount board Remove flex connections to MPEG board Remove 3 screws 222 (PSU board to frame) Release snap of 1 spacer 226 (board to frame) Demount board Remove flex c

9、onnections to PSU board MPEG board 1002PSU board 1001 Mounting Demounting PCB LOCATION DVD616K/031/691/751/782/931 5. Dismantling instructions and exploded view 1001 Power board 1002 MPEG board Remote Control 1005 MIC board 1004 Front board 1003 Loader module PARTS 12NC LIST DVD616k/031DVD616K/691DV

10、D616K/751 1001 PSU board 3141 018 02930 1002 MPEG board 3141 018 02810 1003 Loader module3141 018 02660 1004 Front board 1005 Front board 3141 018 02560 Remote control3141 017 90161 DVD616K/782DVD616K/931 3141 018 02550 3141 018 02930 3141 018 02780 3141 018 02660 3141 018 02560 3141 017 90161 3141

11、018 02550 3141 018 02930 3141 018 02790 3141 018 02660 3141 018 02560 3141 017 90161 3141 018 02550 3141 018 02930 3141 018 02800 3141 018 02660 3141 018 02560 3141 017 90161 3141 018 02550 3141 018 02930 3141 018 02770 3141 018 02660 3141 018 02560 3141 017 90171 3141 018 02550 5 5. Dismantling ins

12、tructions and exploded view DVD616K/691 EXPLODED VIEW 384 219 204 200 240 208 249 205 261 1004 1004 1001 1003 1005 1002 224 213 232 5001 260 201 MECHANICAL PARTS LIST DVD616K/691 ITEM CODE NUMBERDESCRIPTION 2003141 017 76140CAB FRONT DVD616K/691 PNT PRT 2013141 014 24720BRACKET 2043141 017 76220WIND

13、OW DVD616K 2053141 017 75590BUTTON POWER DVD616K PNT PRT 2083141 017 75580VOLUME KNOB DVD616K PNT 2133141 011 21300FRAME DVD616K 2193141 017 75600DOOR DVD616K PRT 2243141 017 75830BACK PLATE DVD616K/691 PNT PRT 2323141 017 75610COVER TOP DVD616K PNT 2403141 017 75570BUTTON CONTROL DVD616K PNT PRT 24

14、93139 243 10080CUSHION 2604822 532 60948 BUSH, PLASTIC 2613141 011 60520EARTH PLATE DVD616K 3843141 017 90161REMOTE CONTROL 10013141 018 02930PBAS PSU 90PS-132 WR BILLION 10023141 018 02780PBAS MPEG DVD616K/691 10033141 018 02660DVD LOADER MODULE A95H 10043141 018 02550PBAS FRONT DVD616K/931 1005314

15、1 018 02560PBAS MIC DVD616K/931 50013141 018 71300MAIN CORD M7.92VH 1.60M 80013141 010 21160CWAS 40RK/40RK 300 40 28S 80023141 010 21140CWAS 08XH/08XH 350 8 WH 26S 80033141 010 21150CWAS 04XH/04LC 300 22S 6. Block- and wiring diagram BLock diagram DVD616K/031/691/751/782/931 RECEIVER POWER BUTTON SL

16、AVE PROCESSOR (PT6312) CPU 4pin PHconnector at 1602(page6) 12 ROM, SDRAM, SRAM in 6 channel product ,use 4360(7610) 17 AUDIO CONNECTORS PLAY/PAUSE starts/interrupts playback 9 STOP stops playback / OPEN/CLOSE opens/closes the disc tray DISPLAY shows the current status of the player MIC socket 2 for

17、karaoke MIC socket 1 for karaoke MIC volume control 1 for karaoke MIC volume control 2 for karaoke Video out (S-Video) connect to a TV with S-Video inputs Optical ) pause playback temporarily / frame-by-frame playback REPEAT repeat chapter, track, title, disc REPEAT (A-B) repeat a specific segment P

18、REVIEW Preview the content of a track or whole disc MUTE Disable or enable sound output POWER B switches DVD ON or to standby-on mode 0-9 numerical key pad select numbered items in a menu DISPLAY display information on TV screen during playback SYSTEM MENU access or remove players system menu T go t

19、o next chapter or track SUBTITLE subtitle language selector /switch off subtitle ANGLE select DVD camera angle ZOOM enlarge video image AUDIO audio language selector KARAOKE display Karaoke menu to set MIC on or off KEY display Karaoke menu to set key control VOCAL select audio channel MODE display

20、karaoke menu Note: Press digit “1” for about 2 seconds to OPEN or CLOSE disc tray. 7 DVD616K IFU for /751 3141 016 18911 Basic Connections GPlease refer to the instruction books of your TV, VCR, Stereo System or other devices as necessary to make the best connections. G Make one of the following con

21、nections, depending on the capabilities of your existing equipment. The following guidelines are options for the best picture and sound quality available on your DVD player. Connecting to a TV If your TV has a CVBS Video input connector, 0 Connect the CVBS VIDEO OUT on the DVD player to the CVBS VID

22、EO IN (cable supplied). If your TV has a S-Video input connector, 0 Connect the S-Video OUT on the DVD player to the S-Video IN (not supplied). If your TV has a Component video (Y/CB/CR)input connector, 0 Connect the Y/CB/CR VIDEO OUT on the DVD player to the corresponding connector on the TV using

23、the component video cable (not supplied). Caution: Do not connect the component video and S-Video output at the same time as only one can be active at any time( refer to chapter “Video Out Setup”). Warning! Never make or change connections with the power switched on. Connect the DVD player directly

24、to your TV, instead of eg. a VCR, to avoid distortion because DVD video discs are copy protected. Do not connect the DVD player AUDIO OUT to PHONO IN of your player. Preparation 8 DVD616K IFU for /751 3141 016 18911 Connecting to a Audio System 1You can also listen to the sound of audio CDs and DVD

25、video discs by connecting to an optional stereo system. 2Connect the Left and Right AUDIO OUT on the DVD player to the Left and Right AUDIO IN on the stereo system. Sound 1Digital audio connections provide the clearest sound. Connect one of the DVD players DIGITAL AUDIO OUT (COAXIAL or OPTICAL) to y

26、our amplifier or receiver. 2If digital connections are not possible, connect the DVD players red and white AUDIO OUT to your amplifier, receiver, stereo or TV. Connecting to Optional Equipment GA digital component with a built-in MPEG 2, Dolby Digital or DTS decoder allows you to enjoy the surround

27、sound while producing the effect of being in a movie theater or a concert hall. If your receiver has a Dolby Digital, MPEG 2 or DTS decoder, Connect to A/V receiver with digital coaxial or optical cable G Connect the DIGITAL COAXIAL AUDIO OUT of the DVD player to the corresponding input on the recei

28、ver using the normal audio or video cable supplied. Notes: If the audio format of the digital output does not match the capabilities of your receiver, the receiver will produce a strong, distorted sound or no sound at all. To set the audio format of the current DVD in the Setup Menu, refer to the ch

29、apter Setup Menu. Preparation 9 DVD616K IFU for /751 3141 016 18911 Preparation Inserting batteries into the Remote Control 1Open the battery cover. 2Insert batteries with the correct polarity as indicated by the + and - symbols inside the battery compartment. 3Close the cover. + - + - CAUTION! Remo

30、ve batteries if they are exhausted or not to be used for a long time. Do not use old and new or different types of batteries in combination. Batteries contain chemical substances, so they should be disposed off properly and kept away from children. Using the Remote Control GDirect the remote control

31、 at the remote sensor of the DVD player. GDo not drop or give the remote control a shock. GDo not leave the remote control near extremely hot or humid place. GDo not spill water or put anything wet on the remote control. NTSC/PAL Conversion This player is equipped with a NTSC/PAL conversion feature

32、to convert the video output of the disc to match your TV system. The conversions supported are as below: NTSCPALNTSC NTSCPALPAL NTSCPALNTSC NTSCPALPAL DiscOutput format Type DVD VCD NTSC FormatSelected mode PAL NTSC PAL NTSCPALAUTO Notes: AUTO can only be selected when using a TV that has both the N

33、TSC and PAL systems. Slight picture distortions may occur due to this conversion. This is normal. Thus, the AUTO format is most suitable for the best picture quality. 10 DVD616K IFU for /751 3141 016 18911 Switching On 1Switch on the TV and DVD player. 2Set the TV to the correct Video IN channel. (e

34、g. EXT1, EXT2, AV1, AV2, AUDIO/VIDEO, etc. Please refer to to your TV owners manual for detail) The player display lights and the default screen appears on the TV. 3If you are using an external equipment (eg. audio system or receiver), turn them on and select the appropriate input source that was us

35、ed to connect to the DVD player output. Refer to the equipment owners manual for detail. PreparationOperation Basic Playback 1Press POWER ON/OFF on the front panel. 2Press OPEN/CLOSE on the front panel to open disc loading tray. 3Place the chosen disc in the tray, with the label facing up. 4Press OP

36、EN/CLOSE again to close the tray. After recognizing this disc the player begin to playback automatically. POWER ON/OFF Notes: DVDs may have a region code. Your player will not play discs that have a region code different from the region code of your player. If Disc Lock is set to ON and the disc ins

37、erted is not authorized, the 4-digit code must be entered and/or the disc must be authorized (see Disc Lock). General operation Video control during playback STOP DVD VCDCD 1 You can resume the play from the point at which you stopped last time, if you just press the STOP key once. It will start fro

38、m the beginning if you press the STOP key twice to stop playback. PAUSE/STEP DVD VCDCD 1 To get a still picture, press PAUSE key during playback. 2 To step forward to the next frame picture, press PAUSE key again. 3 To resume normal playback, press PLAY. SEARCH DVD VCDCD 1 To search the contents in

39、fast speed, press the 2 or 1 for fast forward/backward searching. 2 Press the 1 or 2 again to increase the speed for searching. 3 Press PLAY to return to the normal playback. 11 DVD616K IFU for /751 3141 016 18911 Slow Motion DVD 1 To get slow motion effect during playback, press 3 or 4. 2 Press 3 o

40、r 4 again to get different playback forward/backward speed. 3 Press PLAY to return to the normal play back. VCDCD 1 To get slow motion effect during playback, press 3. 2 Press 3 again to get different playback forward speed. 3 Press the PLAY key to return to the normal play back. NOTE: - The SLOW BA

41、CKWARD function is not available for the Super VCD/VCD/CD disc. Audio control during playback MUTE DVD VCDCD 1 Press the MUTE key to disable the sound output. 2 Press the MUTE key again to remove the mute. SURROUND SOUND DVDVCDCD The DVD player can reproduce virtual surround sound effect. 1 Press th

42、e Display key on the remote control. 2 Press 1 2 to highlight 3D option. 3 Press 3 4 to switch it on or off. Operation Repeat DVD Repeat chapter/title/disc G To repeat the current chapter, press REPEAT. G To repeat the current title, press REPEAT a second time. G To exit Repeat mode, press REPEAT ag

43、ain. VCD CD Repeat track/disc G To repeat the current track, press REPEAT. G To repeat the entire disc, press REPEAT a second time. G To exit Repeat mode, press REPEAT again. Repeat A-B DVD VCD CD DVD-Video Discs: repeat a sequence in a title Video and Audio CDs: repeat a sequence in a track 1Press

44、REPEAT A-B at your chosen starting point. 2Press REPEAT A-B again at your chosen end point. 3To exit the sequence, press REPEAT A-B. 5 Disc Resume DVD VCD CD This player can resume the playback of last 5 discs, which should be unload at stop mode. 1 Load one disc, which is one of last 5 discs. 2 Pre

45、ss PLAY when DVD player is recognizing the disc. if the information of this disc has been stored in the memory of DVD player, it will be played back from the point you stopped last time. Audio channel selection VCDCD 1 SVCD has two stereo audio channels which are used for playing karaoke or the audio language selection. ( for instance, you can choose one channel for only the music background of the song while you play the karaoke.) 2 Press the A