Panasonic-SABT100E-htss-sm 电路图 维修手册.pdf

《Panasonic-SABT100E-htss-sm 电路图 维修手册.pdf》由会员分享，可在线阅读，更多相关《Panasonic-SABT100E-htss-sm 电路图 维修手册.pdf（178页珍藏版）》请在收音机爱好者资料库上搜索。

1、Main unit SA-BT100EB/EG ? ?GENERAL Power supply:230V to 240V, 50 Hz iPod connector:DC OUT 5V 500 mA MAX Power consumption:This unit 140 W Power consumption in standby mode: approx. 0.4 W Dimensions (WHD): With transmitter: 430 mmx96 mmx327 mm Without transmitter: 430 mmx90 mmx327 mm Mass:This unit a

2、pprox 4.1 kg(9.1 lbs) Operating temperature range:+0 C to +40 C Operating humidity range:35% to 80% RH (no condensation) ? ?AMPLIFIER SECTION RMS TTL Power Output: 1000W Front Ch: 250 W per channel (6 ), 1 kHz, 10% THD Center Ch: 2008 Matsushita Electric Industrial Co. Ltd. All rightsreserved.Unauth

3、orizedcopyingand distribution is a violation of law. SA-BT100EB SA-BT100EG Colour (K).Black Type 250 W per channel (6 ), 1 kHz, 10% THD Subwoofer Ch: 250 W per channel (6 ), 100 Hz, 10% THD DIN TTL Power Output: 600W Front Ch: 150 W per channel (6 ), 1kHz, 1.0% THD Center Ch: 150 W per channel (6 ),

4、 1kHz, 1.0% THD Subwoofer Ch: 150 W per channel (6 ), 45 Hz to120 Hz, 1.0% THD Audio Input: AUX: x 1 Digital Audio Input: Optical: x 1 Sampling Frequency: 32kHz, 44.1kHz, 48kHz Digital Audio output: Optical: Blu-ray Disc Home Theater Sound System Specifications ORDER NO. MD0805005CE RadioFans.CN 收音机

5、爱 好者资料库 x 1 ? ?FM TUNER SECTION Frequency Range: 87.5-108.0 MHz (100-kHz step) Antenna terminals 75 (unbalanced) ? ?DISC SECTION Discs played: (1)BD-Video: BD-ROM Version 2 (2)BD-RE: Version 3 (Single Layer, Dual Layer), JPEG*6 (3)BD-R: Version 2 (Single Layer, Dual Layer) (4)DVD-RAM: DVD Video Reco

6、rding format, AVCHD format*7, JPEG*4 (5)DVD-R/DVD-R DL: DVD-Video format*1,DVD-Video Recording format, AVCHD format*1,7DivX (6)DVD-RW: DVD-Video format*1,DVD-Video Recording format, AVCHD format*1,7 (7)+R/+RW/+R DL: Video*1, AVCHD format*1,7 (8)DVD-Video DVD-Video format (9)CD-Audio CD-DA (10) CD-R/

7、RW CD-DA, JPEG*5, MP3 Optical pick-upSystem with 2 lenses Wavelength:782 nm (CDs)/662nm (DVDs)/405nm (BDs) Laser Specification System with 2 lenses Class 1 LASER Product Wavelength:782 nm (CDs)/662 nm (DVDs)/405 nm (BDs) Laser power:No hazardous radiation is emitted with the safety protection SD CAR

8、D SECTION SD card slot:Output connector (1 system) SD card:SD Memory Card*2formatted FAT12, FAT32*3. JPEG*4, AVCHD format*7 ? ?Disable capacity will be less (SD Card) *1 Finalizing is necessary. *2 includes SDHC card includes miniSD cards (need a miniSD Adaptor) includes microSD cards (need a microS

9、D Adaptor) *3 Does not support long file name *4 The total combined maximum number of recognizable picture contents and folders: 3000 picture contents and 300 folders. *5 The total combined maximum number of recognizable picture contents and folders: 999 picture contents and 99 folders. *6 The total

10、 combined maximum number of recognizable picture contents and folders: 9999 picture contents and 300 folders. *7 The total combined maximum number of recognizable picture contents and folders: 200 file contents and 300 folders. *8 AVCHD format V1.0 ? ?VIDEO SECTION Signal system:PAL/NTSC Video outpu

11、t Output level:1.0 Vp-p (75 ) Output connector:Pin jack (1 system) S Video Output Y Output level:1.0 Vp-p (75 ) C Output level:0.286 Vp-p (75 ) at Burst Output connector:S Terminal (1 system) Component Video Output(1080i/720p/480p/480i) (1080i/720p/576p/576i) ? ?Y output level:1.0 Vp-p (75 ) ? ?PBou

12、tput level:0.7 Vp-p (75 ) ? ?PRoutput level:0.7 Vp-p (75 ) Output connector Pin jack (Y: green, PB: blue, PR: red) (1 system) HDMI AV output Output format: 480p (525p)/576p (625p)/720p (750p)/1080i (1225i)/1080p (1125p) Output connector: Type A (19 pin) HDMITM(Deep color) ?This unit supports “HDAVI

13、Control 3” function. Note: 1.Specifications are subject to change without notice. Mass and dimensions are approximate. 2.Total harmonic distortion is measured by the digital spectrum analyzer. Solder: This model uses lead free solder (PbF). Mechanism: This model uses BD/DVD Drive (VXY2001-SER) Wirel

14、ess Features: This Model supports wireless surround (e.g:SH-FX67) Refer to their respective original service manuals for *1. 2 SA-BT100EB / SA-BT100EG RadioFans.CN 收音机爱 好者资料库 1 Safety Precautions 6 1.1. GENERAL GUIDELINES 6 1.2. Before Repair and Adjustment 6 1.3. Protection Circuitry 6 1.4. Safety

15、Parts Information 7 1.5. Caution for AC Cord 8 CONTENTS Page Page 3 SA-BT100EB / SA-BT100EG RadioFans.CN 收音机爱 好者资料库 2 Prevention of Electrostatic Discharge (ESD) to Electrostatically Sensitive (ES) Devices 9 3 Precaution of Laser Diode 10 4 About Lead Free Solder (PbF) 11 4.1. Service caution based

16、on legal restrictions 11 5 Service Navigation 12 5.1. Service Information 12 6 Accessories 13 7 Operation Procedures 14 7.1. Remote Control Key Buttons Operations 14 7.2. Main Unit Key Buttons Operations 15 7.3. Using the VIERA Link “HDAVI Control” 16 7.4. Using the iPod 17 7.5. Playing Secondary Vi

17、deo and Audio 19 7.6. Basic Connections 20 7.7. Disc and SD Cards Information 23 8 Operation Instructions 27 8.1. Taking out the Disc from BD/DVD Drive Unit when Disc cannot be ejected by OPEN/CLOSE button 27 9 Service Mode 28 9.1. Self-Diagnosis and Special Mode Setting 28 9.2. Special Mode Setting

18、 31 9.3. Service Mode at glance 33 9.4. Service Mode Table (Wireless - e.g. SH-FX67) 38 10 Assembling and Disassembling 40 10.1. Disassembly Flow Chart 42 10.2. Main Components and P.C.B. Locations 43 10.3. Disassembly of Top Cabinet 44 10.4. Disassembly of Rear Panel 44 10.5. Disassembly of Front P

19、anel 44 10.6. Disassembly of BD/DVD Drive Unit 45 10.7. Disassembly of Panel/ Headphone/ Power / Open/close P.C.B. 46 10.8. Disassembly of SD P.C.B. 47 10.9. Disassembly of Lid 47 10.10. Disassembly of Ipod Cradle P.C.B. 48 10.11. Disassembly of AC Inlet P.C.B. 49 10.12. Disassembly of Main P.C.B. 5

20、0 10.13. Disassembly of D-Amp P.C.B. 51 10.14. Replacement of Digital Amp IC (IC5000) 52 10.15. Disassembly of SMPS P.C.B. 52 10.16. Replacement of Switch Regulator IC (IC5701) 53 10.17. Replacement of Switch Regulator Diode (D5702) 54 10.18. Replacement of Regulator Diode (D5801) 55 10.19. Replacem

21、ent of Regulator Diode (D5802) 56 10.20. Replacement of Regulator Diode (D5803) 57 10.21. Disassembly of Wireless Adapter P.C.B. 58 10.22. Disassembly of DSP P.C.B. 58 10.23. Disassembly of Digital P.C.B. 59 10.24. Disassembly of S Video P.C.B. 60 10.25. Disassembly of Stand 61 11 Service Fixture an

22、d Tools 62 12 Service Position 63 12.1. Checking THERE ARE NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. CAUTION! DO NOT INSTALL OR PLACE THIS UNIT IN A BOOKCASE, BUILT-IN CABINET OR IN ANOTHER CONFINED SPACE. ENSURE THE UNIT IS WELL VENTILATED. TO PREVENT RISK OF

23、 ELECTRIC SHOCK OR FIRE HAZARD DUE TO OVERHEATING, ENSURE THAT CURTAINS AND ANY OTHER MATERIALS DO NOT OBSTRUCT THE VENTILATION VENTS. DO NOT OBSTRUCT THE UNIT S VENTILATION OPENINGS WITH NEWSPAPERS, TABLECLOTHS, CURTAINS, AND SIMILAR ITEMS. DO NOT PLACE SOURCES OF NAKED FLAMES, SUCH AS LIGHTED CAND

24、LES, ON THE UNIT. DISPOSE OF BATTERIES IN AN ENVIRONMENTALLY FRIENDLY MANNER. CAUTION Danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent type recommended by the manufacturer. Dispose of used batteries according to the manufacturers instructions. THIS UNI

25、T IS INTENDED FOR USE IN MODERATE CLIMATES. This product may receive radio interference caused by mobile telephones during use. If such interference is apparent, please increase separation between the product and the mobile telephone. The socket outlet shall be installed near the equipment and easil

26、y accessible. The mains plug of the power supply cord shall remain readily operable. To completely disconnect this apparatus from the AC Mains, disconnect the power supply cord plug from AC receptacle. Figure B Fuse (5 ampere) Fuse (5 ampere) Figure A A AA A 8 SA-BT100EB / SA-BT100EG 2 Prevention of

27、 Electrostatic Discharge (ESD) to Electrostatically Sensitive (ES) Devices Some semiconductor (solid state) devices can be damaged easily by static electricity. Such components commonly are called Electrostatically Sensitive (ES) Devices. Examples of typical ES devices are integrated circuits and so

28、me field-effect transistors and semiconductor “chip” components. The following techniques should be used to help reduce the incidence of component damage caused by electrostatic discharge (ESD). 1. Immediately before handling any semiconductor component or semiconductor-equipped assembly, drain off

29、any ESD on your body by touching a known earth ground. Alternatively, obtain and wear a commercially available discharging ESD wrist strap, which should be removed for potential shock reasons prior to applying power to the unit under test. 2. After removing an electrical assembly equipped with ES de

30、vices, place the assembly on a conductive surface such as aluminum foil, to prevent electrostatic charge buildup or exposure of the assembly. 3. Use only a grounded-tip soldering iron to solder or unsolder ES devices. 4. Use only an anti-static solder removal device. Some solder removal devices not

31、classified as “anti-static (ESD protected)” can generate electrical charge sufficient to damage ES devices. 5. Do not use freon-propelled chemicals. These can generate electrical charges sufficient to damage ES devices. 6. Do not remove a replacement ES device from its protective package until immed

32、iately before you are ready to install it. (Most replacement ES devices are packaged with leads electrically shorted together by conductive foam, aluminum foil or comparable conductive material). 7. Immediately before removing the protective material from the leads of a replacement ES device, touch

33、the protective material to the chassis or circuit assembly into which the device will be installed. Caution: Be sure no power is applied to the chassis or circuit, and observe all other safety precautions. 8. Minimize bodily motions when handling unpackaged replacement ES devices. (Otherwise harmles

34、s motion such as the brushing together of your clothes fabric or the lifting of your foot from a carpeted floor can generate static electricity (ESD) sufficient to damage an ES device). 9 SA-BT100EB / SA-BT100EG 3 Precaution of Laser Diode 10 SA-BT100EB / SA-BT100EG 4 About Lead Free Solder (PbF) 4.

35、1. Service caution based on legal restrictions 4.1.1. General description about Lead Free Solder (PbF) The lead free solder has been used in the mounting process of all electrical components on the printed circuit boards used for this equipment in considering the globally environmental conservation.

36、 The normal solder is the alloy of tin (Sn) and lead (Pb). On the other hand, the lead free solder is the alloy mainly consists of tin (Sn), silver (Ag) and Copper (Cu), and the melting point of the lead free solder is higher approx.30 degrees C (86F) more than that of the normal solder. Definition

37、of PCB Lead Free Solder being used The letter of “PbF” is printed either foil side or components side on the PCB using the lead free solder. (See right figure) Service caution for repair work using Lead Free Solder (PbF) The lead free solder has to be used when repairing the equipment for which the

38、lead free solder is used. (Definition: The letter of “PbF” is printed on the PCB using the lead free solder.) To put lead free solder, it should be well molten and mixed with the original lead free solder. Remove the remaining lead free solder on the PCB cleanly for soldering of the new IC. Since th

39、e melting point of the lead free solder is higher than that of the normal lead solder, it takes the longer time to melt the lead free solder. Use the soldering iron (more than 70W) equipped with the temperature control after setting the temperature at 35030 degrees C (66286F). Recommended Lead Free

40、Solder (Service Parts Route.) The following 3 types of lead free solder are available through the service parts route. RFKZ03D01K-(0.3mm 100g Reel) RFKZ06D01K-(0.6mm 100g Reel) RFKZ10D01K-(1.0mm 100g Reel) Note * Ingredient: tin (Sn), 96.5%, silver (Ag) 3.0%, Copper (Cu) 0.5%, Cobalt (Co) / Germaniu

41、m (Ge) 0.1 to 0.3% 11 SA-BT100EB / SA-BT100EG 5 Service Navigation 5.1. Service Information The service manual contains technical information which will allow service personnels to understand and service this model. Please place orders using the parts list and not the drawing reference numbers. If t

42、he circuit is changed or modified, the information will be followed by supplement service manual to be filed with original service manual. 1) This service manual does not contain the following information, because of the impossibility of servicing at component level. * Schematic Diagram, Block Diagr

43、am and P.C.B. layout of Digital P.C.B. * PArts List for individual parts of Digital P.C.B. * Exploded View and Parts List for individual parts of BD/DVD drive. 2) The following category are recycle module part. Please send them to Central Repair Center. * Digital P.C.B. (BT100EB/EG: RFKB4368B) 3) Fo

44、r BD/DVD Drive, it depends on area to different recycle system. Please refer to service policy in detail. * BD/DVD drive (VXY2001-SER) 12 SA-BT100EB / SA-BT100EG Remote control AC Cord (EG) AC Cord (EB) Speaker cables Video cable FM Indoor Antenna Speaker cable sticker Antenna plug adapter 6 Accesso

45、ries Note: Refer to “Replacement Parts List” (Section 25) for the part number. 13 SA-BT100EB / SA-BT100EG 7 Operation Procedures 7.1. Remote Control Key Buttons Operations Remote control 1 2 3 4 5 6 8 9 10 11 12 7 13 14 15 16 17 18 20 21 22 23 24 19 Turn the unit on and off Select the source BD/SD:

46、Select disc drive or SD card drive FM:Select FM tuner iPod:Select iPod as the source Numbered buttons Select preset radio stations and title numbers, etc./Enter numbers Cancel Basic playback control buttons , :Select preset radio stations , :Select radio station manually Show on-screen menu Show Pop

47、-up menu Show Top Menu/Direct Navigator Show option menu These buttons are used when operating a BD-Video disc that includes JavaTM applications (BD-J). For more information about operating this kind of disc, please read the instructions that came with the disc. The A and B buttons are also used wit

48、h the Title View, Picture View and Album View screens Show Setup menu SOUND:Set the sound effect SLEEP:Set the sleep timer CH SELECT:Select speaker channel MUTING:Mute the sound Transmit the remote control signal TV operation buttons Aim the remote control at the Panasonic TV and press the button. T

49、V:Turn the TV on and off AV:Switch the input channel VOL:Adjust the TV volume This may not work properly with some models. Select the source SD on the units display is not displayed when the SD card is not in the SD card slot Adjust the volume of the main unit Select audio/remove interference during radio reception Start up and play a disc automatically , , , :Menu selection OK:Select