Harman-Kardon-BDS-5-Service-Manual 电路图 维修手册.pdf

《Harman-Kardon-BDS-5-Service-Manual 电路图 维修手册.pdf》由会员分享，可在线阅读，更多相关《Harman-Kardon-BDS-5-Service-Manual 电路图 维修手册.pdf（65页珍藏版）》请在收音机爱好者资料库上搜索。

1、 harman/kardon Service Manual HK BDS 2 / BDS 5 2 x 65W and 5 X 65w multi-voltage Blu-ray home cinema receivers CONTENTS FFFF ADDEDFSF OWNERS MANUAL INTRODUCTION 2 TROUBLESHOOTING CHARTS 11 BDS SYSTEM ACCESSORIES 3 EXPLODED VIEW AND PARTS 22 FRONT AND REAR PANELS 4 BDS 2 PARTS LIST 23 REMOTE CONTROL

2、FUNCTIONS 6 BDS 5 PARTS LIST 24 TROUBLESHOOTING GUIDE 8 PCB DRAWINGS 25 BASIC SPECIFICATIONS 9 WIRING DIAGRAM 33 SCHEMATIC DIAGRAMS 34-63 SOFTWARE UPGRADE PROCESS 10 Released EU2010 Harman Consumer Group, Inc. Rev 4, 03/2012 8500 Balboa Boulevard Northridge, California 91329 harman/kardonBDS 2 / BDS

3、 5 Service Manual Page 1 of 63 RadioFans.CN 收音机爱 好者资料库 IMPORTANT INFORMATION ABOUT PAIRING NEW LOADER WITH MAIN BOARD ON PAGE 64-65. Verify Line Voltage Before Using, Unpacking, Installation Location, Cleaning, Moving the Receiver and Introduction 3 BDS Introduction please register your product on o

4、ur web site at . note: youll need the products serial number. at the same time, you can choose to be notified about our new products and/or special promotions. Thank You for Choosing harman kardon Products! in the years since harman kardon engineers invented the high-fidelity receiver, we have taken

5、 to heart this philosophy: Bringing the joy of home entertainment to as many people as possible, adding performance and ease-of-use features that enhance the experience. the BDs series of home entertainment systems offers a complete home entertainment solution with a wealth of listening and viewing

6、options in one sleek receiver. each BDs series system also includes a 5.1-channel, 2.1-channel or soundbar loudspeaker system, a system remote control and all the cables and accessories you need to enjoy movies and music in your own home, when you use them with your television or video display. to g

7、et the maximum enjoyment from your new BDs system, we urge you to read this manual thoroughly and refer back to it as you become more familiar with your new systems features and their operation. if you have any questions about this product, its installation or its operation, please contact your reta

8、iler or custom installer, or visit our web site at . Verify Line Voltage Before Using your BDs receiver has been designed for use with 110 240-volt, 50Hz/60Hz ac current. your subwoofer has been designed for use with either 120-volt, 60Hz or 220 240-volt, 50/60Hz ac current, depending on where your

9、system was sold. the receiver includes a detachable iec power cable designed for use in the region where the system is sold. connection to a line voltage other than that for which the units are intended can create a safety and fire hazard and may damage the units. if you have any questions about the

10、 voltage requirements for your specific model or about the line voltage in your area, contact your dealer before plugging the unit into a wall outlet. Unpacking the carton and shipping materials used to protect your new player during shipment were specially designed to cushion it from shock and vibr

11、ation. we suggest that you save the carton and packing materials for use in shipping if you move or if the unit ever needs repair. to minimize the size of the carton in storage, you may wish to flatten it. you can do it by carefully slitting the tape seams on the cartons bottom and collapsing it. yo

12、u can store cardboard inserts in the same manner. packing materials that cannot be collapsed should be saved along with the carton in a plastic bag. if you do not wish to save the packaging materials, please note that the carton and other sections of the shipping-protection materials are recyclable.

13、 please respect the environment and discard those materials at a local recycling center. remove the protective plastic film from the front-panel lens. Leaving the film in place will affect the performance of your remote control. Installation Location to ensure proper operation and to avoid the poten

14、tial for safety hazards, place the unit on a firm and level surface. when placing the unit on a shelf, be certain that the shelf and any mounting hardware can support the weight of the product. provide proper space both above and below the unit for ventilation. if this product will be installed in a

15、 cabinet or other enclosed area, make certain that there is sufficient air movement within the area. Under some circumstances, a fan may be required. Do not place the unit directly on a carpeted surface. avoid installation in extremely hot or cold locations or in an area that is exposed to direct su

16、nlight or heating equipment. avoid moist or humid locations. Do not obstruct the fan vents on the rear panel or the ventilation slots on the top and sides of the unit or place objects directly over or next to them. Do not place the receiver directly on top of a product that generates excessive heat.

17、 Due to the heat generated by the receiver and other components in your system, there is the remote possibility that the rubber padding on the bottom of the units feet may leave marks on certain wood or wood-veneer materials. Use caution when placing the unit on soft woods or other materials that he

18、at or heavy objects may damage. some surface finishes may be particularly sensitive to absorbing such marks, due to a variety of factors beyond harman kardon control, including the nature of the finish, cleaning materials used, normal heat and vibration caused by the use of the product, or other fac

19、tors. your warranty will not cover this type of damage to furniture, so exercise caution in choosing an installation location for the component and in performing normal maintenance practices. your new harman kardon Blu-ray Disc player requires a broadband internet connection for BD-Live interactivit

20、y. Cleaning Receiver when the receiver gets dirty, wipe it with a clean, soft, dry cloth. if necessary, and only after unplugging the ac power cord, wipe it with a soft cloth dampened with mild soapy water, then a fresh cloth with clean water. wipe it dry immediately with a dry cloth. neVer use benz

21、ene, aerosol cleaners, thinner, alcohol or any other volatile cleaning agent. Do not use abrasive cleaners, as they may damage the finish of metal parts. avoid spraying insecticide near the unit. Speakers and Subwoofer when needed, use a soft cloth to remove any fingerprints or dust from the enclosu

22、res or grilles. note: Do not use any cleaning products or polishes on the enclosures or grilles. Moving the Receiver Before moving the receiver, disconnect any interconnection cords to other components, and disconnect the unit from its ac outlet. NOTE: the built-in Blu-ray Disc/DVD player in your BD

23、s receiver is designed and manufactured for compatibility with region management information that is encoded on most Blu-ray Disc recordings and DVD recordings: BDS receivers sold in the USA are designed only for playback of discs with Blu-ray Disc region code a and DVD region code 1 information, or

24、 for discs that do not contain any region code information. BDS receivers sold in Europe are designed only for playback of discs with Blu-ray Disc region code B and DVD region code 2 information, or for discs that do not contain region code information. if there is a region code on a disc other than

25、 the one your BDs player is designed for, it will not play in your BDs receiver. harman/kardonBDS 2 / BDS 5 Service Manual Page 2 of 63 RadioFans.CN 收音机爱 好者资料库 System Components and Supplied AccessoriesBDS 4 System Components your BDs system includes the following components: BDS 800 System 1 x BDs

26、5 5.1-channel Blu-ray Disc receiver 4 x sat-ts60 satellite speakers 1 x sat-ts60 center speaker 1 x Hkts200sUB powered subwoofer BDS 700 System 1 x BDs 5 5.1-channel Blu-ray Disc receiver 4 x sat-ts7 satellite speakers 1 x cen-ts7 center speaker 1 x Hkts200sUB powered subwoofer BDS 600 System 1 x BD

27、s 5 5.1-channel Blu-ray Disc receiver 1 x sB10 soundbar speaker 1 x Hkts210sUB powered subwoofer BDS 400 System 1 x BDs 2 2.1-channel Blu-ray Disc receiver 2 x sat-ts60 satellite speakers 1 x Hkts200sUB powered subwoofer BDS 300 System 1 x BDs 2 2.1-channel Blu-ray Disc receiver 2 x sat-ts11 satelli

28、te speakers 1 x Hkts200sUB powered subwoofer Supplied Accessories if any of these items are missing, please contact harman kardon customer service via . BDS 800, BDS 400 Systems BDS 700, BDS 300 Systems BDS 600 System DISC AUX iPOD RADIO SETTINGS DISPLAY A - B REPEAT 2 EJECTPOWERTV 1 3 5 4 6 8 0 7 9

29、 CLEAR HOME FIND OPTIONS SURROUND OK TOP MENU POP-UP EXIT + VOLUME CHANNEL MUTE THUMBNAIL ZOOM BOOKMARK PROGRAM system remote control DISC AUX iPOD RADIO SETTINGS DISPLAY A - B REPEAT 2 EJECTPOWERTV 1 3 5 4 6 8 0 7 9 CLEAR HOME FIND OPTIONS SURROUND OK TOP MENU POP-UP EXIT + VOLUME CHANNEL MUTE THUM

30、BNAIL ZOOM BOOKMARK PROGRAM system remote control satellite speaker wall-mount brackets (four with BDs 800 system, two with BDs 400 system) Metal stop plates and screws for satellite speaker wall-mount brackets (four with BDs 800 system, two with BDs 400 system) center speaker wall- mount bracket (B

31、Ds 800 system only) two 5-meter (16.4-foot) speaker cables red and white color bands two 5-meter (16.4-foot) speaker cables red and white color bands one 4-meter (13.1-foot) speaker cable for center speaker green color band (BDs 800 system only) one 4-meter (13.1-foot) speaker cable for center speak

32、er green color band (BDs 700 system only) two 10-meter (32.8-foot) speaker cables for rear satellites gray and blue color bands (BDs 800 system only) two 10-meter (32.8-foot) speaker cables for rear satellites gray and blue color bands (BDs 700 system only) one mono rca audio cable for connection to

33、 the subwoofer purple connectors one mono rca audio cable for connection to the subwoofer purple connectors fM wire antenna fM wire antenna HDMi cable HDMi cable satellite speaker wall- mount brackets and hardware (four with BDs 700 system, two with BDs 300 system) one center speaker wall-mount brac

34、ket (BDs 700 system only) DISC AUX iPOD RADIO SETTINGS DISPLAY A - B REPEAT 2 EJECTPOWERTV 1 3 5 4 6 8 0 7 9 CLEAR HOME FIND OPTIONS SURROUND OK TOP MENU POP-UP EXIT + VOLUME CHANNEL MUTE THUMBNAIL ZOOM BOOKMARK PROGRAM system remote control three speaker cables one mono rca audio cable for connecti

35、on to the subwoofer purple connectors fM wire antenna HDMi cabletwo soundbar wall- mount brackets two rubber feet harman/kardonBDS 2 / BDS 5 Service Manual Page 3 of 63 RadioFans.CN 收音机爱 好者资料库 BDS 5 Receiver Front-Panel Controls Disc Slot: insert a compatible disc into the slot. the BDs receivers di

36、sc player will accept 5-inch (12cm) and 3-inch (8cm) discs. Information Display: Various messages appear on this display in response to commands and to show the audio/video that is playing, the settings or other aspects of the BDs receivers status as described throughout this manual. Eject Button (o

37、n top of unit): press this button to eject a disc from the BDs receivers built-in disc player. Before pressing this button, make sure no objects are blocking the disc-slot opening. note: if you do not remove the ejected disc within 90 seconds, it will automatically re-load back into the disc player

38、for protection. Standby Button (on top of unit): this button toggles the receiver between the on and standby modes. Power Indicator: this LeD surrounds the standby button. when the BDs receiver is plugged into ac power, the LeD turns amber to indicate that the receiver is in standby mode (ready to b

39、e turned on). when you turn the BDs receiver on (by the standby button or the remote controls power button), the LeD turns white. Headphone Jack: insert the 3.5mm stereo mini connector from a set of headphones into this jack. note: when a plug is inserted into the Headphone jack, the BDs receivers s

40、peaker outputs automatically mute; the HDMi audio output remains active. Volume Control: rotate the disc clockwise to raise the volume; rotate counterclockwise to lower the volume. the volume level will appear on the information Display and on the on-screen menu. IMPORTANT: Do not turn the receivers

41、 Volume control up to or past the point where the audio from the speakers becomes distorted. Doing so can damage the speakers. USB 2.0 Port: gently insert a flash drive or HDD disk drive with a UsB standard-a cable to this port. IMPORTANT: Do not connect a PC or other USB host/controller to this por

42、t, or you may damage both the BDS receiver and the other device. orient the devices plug so it fits all the way into the BDs receivers UsB connector. you may insert or remove the device at any time there is no installation or ejection procedure. Receiver Front-Panel Controls Disc slotinformation Dis

43、play Headphone Jack Volume control eject Button (on top panel) standby Button (on top panel) UsB port harman/kardonBDS 2 / BDS 5 Service Manual Page 4 of 63 Receiver Rear-Panel ConnectionsBDS 6 Receiver Rear-Panel Connections note: see the Connections section, on page 14, for detailed information ab

44、out making connections. AC Power Connector: after you have made and verified all other connections, plug the supplied ac power cord into this input and into an unswitched ac outlet. Main Power Switch: this mechanical switch turns the BDs receivers power supply on or off. after you have made and veri

45、fied all connections (see the connections section, on page 14), set this switch in the on position. During normal use you will usually leave this switch set to on; it cannot be turned on or off using the remote control. to conserve energy when youre not going to be using the receiver for an extended

46、 period of time, set this switch to off. Speaker Connectors: Use the speaker wires supplied with the speakers to connect the satellite and center speakers to the proper terminals. the BDs 5 receiver (shown) has connections for five speakers: front left, front right, surround left, surround right and

47、 center. the BDs 2 receiver (not shown) has connections for two speakers: front left and front right. see Connections, on page 14, for more information. Subwoofer Output: Use the supplied mono rca audio cable (with the purple connectors) to connect this jack to the subwoofers Line-Level in Lfe jack.

48、 see Connecting the Subwoofer, on page 16, for more details about making connections. BD-Live Connector: to be able to use the BD-Live feature, connect this port to your local area network (Lan) using a cat. 5/cat. 5e/rJ-45 network cable. see BD-Live Interactivity, on page 25, for details. Optical D

49、igital Inputs: connect the optical digital output of an audio-only source component here. the signal may be a Dolby Digital bitstream, a Dts bitstream or a standard pcM digital-audio bitstream. note: Use only one type of digital connection for each source component. Coaxial Digital Input: connect the coaxial digital output of an audio-only source component here. the signal may be a Dolby Digital bitstream, a Dts bitstream or a standa