Cambridge-540Rv3-av-sm 电路图 维修手册.pdf
《Cambridge-540Rv3-av-sm 电路图 维修手册.pdf》由会员分享,可在线阅读,更多相关《Cambridge-540Rv3-av-sm 电路图 维修手册.pdf(51页珍藏版)》请在收音机爱好者资料库上搜索。
1、Gallery Court Hankey Place London SE1 4BB UK Tel: +44 (0)20 7940 2200 Fax: +44 (0)20 7940 2233 540R v3 Issue Date: October 2007 _ SERVICE MANUAL _ SPECIFICATIONS: Power Output 100 watts rms per channel, 8 ohms, two channels driven 80 watts rms per channel, 8 ohms, all six channels driven THD 0.005%
2、1kHz 0.04% 20Hz - 20 kHz Crosstalk 96dB A weighted Tone Control Range Bass +/- 10dB Treble +/- 10dB FM Tuner 87.5 108MHz, 75 ohm coaxial aerial AM Tuner 522 1629kHz 300 ohm loop aerial Video Levels / Impedance Composite (CVBS) = 1Vp-p / 75ohm S-Video (S-VHS) = Y 1Vp-p / 75ohm C 0.286 Vp-p / 75ohm Co
3、mponent = Y 1Vp-p / 75 ohm Cb/Cr 0.75Vp-p / 75ohm Pb/Pr 0.75Vp-p / 75ohm Cont./ AP229961 RadioFans.CN 收音机爱 好者资料库 Gallery Court Hankey Place London SE1 4BB UK Tel: +44 (0)20 7940 2200 Fax: +44 (0)20 7940 2233 SPECIFICATIONS Cont. HDMI Transfer of all resolutions up to and including 1080p 50/60Hz (192
4、0 x 1080) supported, with HDCP handshaking Architecture CS42518 CODEC CS493263 DSP Audio Inputs 6 Line Level + Tuner 6.1 Direct Input Audio Ouputs 6 Amplified Speaker Outputs 6.1 Preamp output 1 Tape record output Video Inputs 3 Composite , 2 S-Video 2 Component Video Video Outputs 1 Composite, 1 S-
5、Video 1 Component Video Digital Inputs 4 Co-Axial, 4 Optical Digital Outputs 1 Co-Axial, 1Optical Stby Power Consumption 10w Max Power Consumption 615w Dimensions H x W x D 150 x 350 x 430mm Weight 9.6Kg (21.1 lbs) AP229961 RadioFans.CN 收音机爱 好者资料库 CAMBRIDGE AUDIO 540R V3 TABLE OF CONTENTS 540R V3 Se
6、rvice Manual Specifications 1 - 2 Table of Contents 3 Troubleshooting 4 Rear Panel Details 5 Front Panel Details 6 Remote Control 7 Connections Diagram 8 Exploded Diagram 9 Exploded Diagram Parts List 10 - 11 Available Service Parts List 12 Fuse Circuit Board 2) This device must accept any interfere
7、nce, including interference that may cause undesired operation. 12345 789 643 19 10 11 1213141516 18 10 17 5 CAMBRIDGE AUDIO 540R V3 Front Panel Connections Front panel controls Volume PhonesTuningMode/Store DVDVideo 1 Dolby Digital EX/ DTS ES DSPPro Logic II/ Neo 6 Input Mode Video 3 inputs VideoLe
8、ftRight Stereo Modes Video 2Video 3Tuner FM/AM Tape/MD/CDRCD/Aux6.1 Direct +Standby/On azur 540R AV Receiver 1234 56789 1011121314151617 18 19 20 Standby/On Switches the unit between Standby mode (indicated by dim power LED) and On (indicated by bright power LED). Standby is a low power mode where t
9、he power consumption is less than 10 Watts. The unit should be left in Standby mode when not in use. Phones Allows for the connection of stereo headphones with a 6.35mm/ Jack plug. Headphones with an impedance of between 32 and 600 ohms are recommended. Note: Plugging in headphones will automaticall
10、y mute the main and pre- amp outputs and select a 2-channel stereo down-mix to be created for headphone use. Tuning +/- Used to tune FM/AM frequencies and skip presets in Tuner mode. Mode/Store Press to cycle between Tuner modes (refer to the Operating instructions section of this manual for more in
11、formation). Note: The 540R v3 remembers the audio and video input type and processing mode for each individual source input. These are recalled each time a source is selected. Stereo Modes Press to listen to a source in either Stereo or Stereo + Sub modes. Dolby Digital EX / DTS ES Press to select D
12、olby Digital or DTS surround modes (with suitably encoded digital source material). These modes can only be decoded from digital audio sources (via Coaxial or Optical inputs). Pro Logic II / Neo:6 Press to select between various Pro Logic II/Neo:6 effects for matrix encoded analog or digital materia
13、l or for post-processing DD/DTS material. Note: The 540R v3 is unable to auto-detect this kind of source material as it does not include embedded encoding type flags so manual selection is required. DSP The 540R v3 can create a surround sound effect even from non- encoded material by Digital Signal
14、Processing (DSP). Press this button to choose one of the following surround sound effects: THEATER, HALL, MOVIE, MUSIC or ROOM. Input Mode Press this button to toggle between analog or optical/coaxial digital input types for the currently selected source. The 540R v3 remembers the input type selecte
15、d for each source when you return to that source. 1 2 3 4 5 6 7 8 9 DVD Press to select the DVD source equipment for output through the 540R v3. Video 1 Press to select the source equipment connected to Video 1 for output through the 540R v3. Video 2 Press to select the source equipment connected to
16、 Video 2 for output through the 540R v3. Video 3 Press to select a video camera recorder/video games console connected to the Video 3 input sockets. Tuner FM/AM Press to select the tuner for output through the 540R v3. Once in Tuner mode also use this button to switch between FM and AM modes. Tape/M
17、D/CDR Press to select the recording device connected to the Tape/MD/CDR input for output through the 540R v3. CD/Aux Press to select the CD or other source equipment connected to CD/Aux on the rear panel for output through the 540R v3. 6.1 Direct Press to select a 6.1 or 5.1 source (DVD-A or SACD pl
18、ayer etc) connected to the 6.1 Direct In sockets. Infrared sensor Receives IR commands from the supplied Azur remote control. A clear unobstructed line of sight between the remote control and the sensor is required. Volume Use to increase/decrease the level of the sound from the outputs of the 540R
19、v3. Video 3 input sockets Allows a video camera recorder/video games console to be connected and selected by the Video 3 source button. 10 11 12 13 14 15 16 17 18 19 20 6 CAMBRIDGE AUDIO 540R V3 Remote Control Details Remote control Tuner AM/FM Selects Tuner mode. Pressing again to toggle between FM
20、 and AM modes. 6.1 Direct Selects the 5.1/6.1 Direct input. PTY (Program Type Search) Press to search by program type when in Tuner mode. Refer to the Operating instructions section of this manual for more information. APS (Auto Program Search) Hold down for 4 seconds to allocate and memorise radio
21、stations automatically. Display Press to view the current source material and decoding mode. When listening to FM with RDS, press to cycle round various RDS information modes. Stereo Mono When listening to the FM tuner, press to alternate between stereo and mono modes. Store Press to store the curre
22、nt frequency when in Tuner mode. Mode Press to select Auto/Manual or Preset tuning when in Tuner mode. DVD, Video 1, Video 2, Video 3, Tape MD/CDR, CD Aux Press the corresponding button to change the input source. The above button descriptions are naturally brief. Please refer to the Operating instr
23、uctions section of this manual for more information on the relevant functions implemented. The 540R v3 is supplied with an Azur Navigator remote control. Insert the supplied AAA batteries to activate. For full details of the various adjustment functions available from the remote, refer to the later
24、sections of this manual. Standby/On Switches the unit between On and Standby mode. Audio In Type Selects between analog or digital audio input for the current source. Stereo, PLII/NEO 6, DD EX/DTS ES, DSP Modes See button details as listed in the Front Panel Controls section on the previous page. DR
- 配套讲稿:
如PPT文件的首页显示word图标,表示该PPT已包含配套word讲稿。双击word图标可打开word文档。
- 特殊限制:
部分文档作品中含有的国旗、国徽等图片,仅作为作品整体效果示例展示,禁止商用。设计者仅对作品中独创性部分享有著作权。
- 关 键 词:
- Cambridge-540Rv3-av-sm 电路图 维修手册 Cambridge 540 Rv3 av sm 维修 手册
收音机爱好者资料库所有资源均是用户自行上传分享,仅供网友学习交流,未经上传用户书面授权,请勿作他用。



Marshall-9100-62-02-Schematic电路原理图.pdf


