LG-DVDR313-cd-sm 电路图 维修手册.pdf

《LG-DVDR313-cd-sm 电路图 维修手册.pdf》由会员分享，可在线阅读，更多相关《LG-DVDR313-cd-sm 电路图 维修手册.pdf（113页珍藏版）》请在收音机爱好者资料库上搜索。

1、CONTENTS SECTION 1 . . . .SUMMARY SECTION 2 . . . .CABINET & MAIN CHASSIS SECTION 3 . . . .ELECTRICAL SECTION 4 . . . .REPLACEMENT PARTS LIST RadioFans.CN 收音机爱 好者资料库 1-1 SECTION 1 SUMMARY CONTENTS NEW FUNCTIONS OF DVD-RECORDER. 1-2 PRODUCT SAFETY SERVICING GUIDELINES FOR VIDEO PRODUCTS. 1-3 SERVICIN

2、G PRECAUTIONS. 1-4 General Servicing Precautions Insulation Checking Prodedure Electrostatically Sensitive Devices SERVICE INFORMATION FOR EEPROM IC SETTING. 1-5 SPECIFICATIONS. 1-6 RadioFans.CN 收音机爱 好者资料库 1-2 NEW FUNCTIONS OF DVD-RECORDER SUMMARY OF PRODUCT - RECORDING FUNCTION OF DVD-RW AND DVD-R

3、SPECIFICATIONS DVD-RW: VIDEO MODE AND VR MODE RECORD AVAILABLE DVD-R :VIDEO MODE RECORD AVAILABLE - DIGITAL DUBBING FUNCTION OF DV CAMCORDER BY USING DV TERMINAL (IEEE1394) RECORD, PLAY, FF/REW FUNCTION BY REMOTE CONTROL OF DV CAMCORDER - DVD PROGRESSIVE PLAY RESPONSE - VARIOUS FUNCTION RESPONSE OF

4、DVD RECORDING (DISC NAVIGATION AND CONVENIENT PLAY, EDIT FUNCTION) - OUTSIDE INPUT AND TV RECORDING AVAILABLE RECORDING SCREEN QUALITY :VR(HQ, SQ, LQ), VIDEO(HQ, SQ) - TV RESERVE RECORDING FUNCTION (AUTO MODE SETTING AVAILABLE FOR RECORDING IN ACCORDANCE WITH THE REMAINING DISC SPACE IN RESERVATION)

5、 SUMMARIZED EXPLANATION OF MAIN FUNCTION DVD RECORDING FUNCTION(VR MODE RECORD / VIDEO MODE RECORD) 1) VR MODE RECORD : MANUAL MODE RECORDING IN ACCORDANCE WITH VARIOUS EDITING FUNC- TION, REMAINING DISC SPACE AND PROGRAM TIME DVD-RW DISC RECORDED IN THE VR MODE CAN BE PLAYED WITH A DVD PLAYER CORRE

6、SPONDING TO THE DVD-RW THERE IS ALSO A PLAY- ER TO BE PLAYED THROUGH FINALIZING. FOR THE DVD-RW, RECORDING AND EDITING IS AVAIL- ABLE AT THE SAME DEVICE EVEN AFTER FINALIZING. 2) VIDEO MODE RECORDING : THERE IS NO EDITING FUNCTION SUCH AS VR MODE RECORDING BUT VIDEO MODE RECORDING IS PLAYED IN A GAM

7、E DEVICE (FOR EXAMPLE, “PLAY STATION 2”) WITH PC, DVD PLAY FUNCTION CORRESPONDING TO DVD PLAYER, CAR DVD, DVD-ROM. TO PLAY IN ANOTHER DEVICE, FINALIZING IS REQUIRED. RECORDING, EDITING AND EDITING IS NOT POS- SIBLE AFTER FINALIZING. HOWEVER, RECORDING IS ALLOWED AT THE DVD-RW DISC IF ERASING THE TIT

8、LE FINALLY RECORDED AFTER FINALIZING. 3) RECORDING MODE INITIALIZATION (A KIND OF FORMATTING): BEGINS INITIALIZATION AFTER SELECTING RECORDING MODE AS VR OR VIDEO MODE BY USING INITIALIZATION FUNCTION OF THE DISC SETTING MENU. INITIALIZES DEFAULT AS VR MODE FOR DVD-RW. RECORDS IT AS VIDEO MODE WITHO

9、UT INITIALIZATION FOR VIDEO MODE. 4) FINALIZE: BEGINS FINALIZE AT THE DISC SETTING MENU DURING STOP. RadioFans.CN 收音机爱 好者资料库 1-3 IMPORTANT SAFETY NOTICE This manual was prepared for use only by properly trained audio-video service technicians. When servicing this product, under no circumstances shou

10、ld the original design be modified or altered without permission from LG Electronics Corporation. All components should be replaced only with types identical to those in the original circuit and their physical location, wiring and lead dress must conform to original layout upon completion of repairs

11、. Special components are also used to prevent x-radiation, shock and fire haz- ard. These components are indicated by the letter “x” included in their compo- nent designators and are required to maintain safe performance. No deviations are allowed without prior approval by LG Electronics Corporation

12、. Circuit diagrams may occasionally differ from the actual circuit used. This way, implementation of the latest safety and performance improvement changes into the set is not delayed until the new service literature is printed. CAUTION: Do not attempt to modify this product in any way. Never perform

13、 customized installations without manufacturers approval. Unauthorized modi- fications will not only void the warranty, but may lead to property damage or user injury. Service work should be performed only after you are thoroughly familiar with these safety checks and servicing guidelines. GRAPHIC S

14、YMBOLS The exclamation point within an equilateral triangle is intended to alert the service personnel to important safety information in the service literature. The lightning flash with arrowhead symbol within an equilateral tri- angle is intended to alert the service personnel to the presence of n

15、oninsulated “dangerous voltage” that may be of sufficient magni- tude to constitute a risk of electric shock. The pictorial representation of a fuse and its rating within an equi- lateral triangle is intended to convey to the service personnel the following fuse replacement caution notice: CAUTION:

16、FOR CONTINUED PROTECTION AGAINST RISK OF FIRE, REPLACE ALL FUSES WITH THE SAME TYPE AND RATING AS MARKED NEAR EACH FUSE. SERVICE INFORMATION While servicing, use an isolation transformer for protection from AC line shock. After the original service problem has been corrected, make a check of the fol

17、- lowing: FIRE AND SHOCK HAZARD 1. Be sure that all components are positioned to avoid a possibility of adjacent component shorts. This is especially important on items trans-ported to and from the repair shop. 2. Verify that all protective devices such as insulators, barriers, covers, shields, stra

18、in reliefs, power supply cords, and other hardware have been reinstalled per the original design. Be sure that the safety purpose of the polarized line plug has not been defeated. 3. Soldering must be inspected to discover possible cold solder joints, solder splashes, or sharp solder points. Be cert

19、ain to remove all loose foreign par- ticles. 4. Check for physical evidence of damage or deterioration to parts and compo- nents, for frayed leads or damaged insulation (including the AC cord), and replace if necessary. 5. No lead or component should touch a high current device or a resistor rated a

20、t 1 watt or more. Lead tension around protruding metal surfaces must be avoided. 6. After reassembly of the set, always perform an AC leakage test on all exposed metallic parts of the cabinet (the channel selector knobs, antenna terminals, handle and screws) to be sure that set is safe to operate wi

21、thout danger of electrical shock. DO NOT USE A LINE ISOLATION TRANS- FORMER DURING THIS TEST. Use an AC voltmeter having 5000 ohms per volt or more sensitivity in the following manner: Connect a 1500 ohm, 10 watt resistor, paralleled by a .15 mfd 150V AC type capacitor between a known good earth gro

22、und water pipe, conduit, etc.) and the exposed metal- lic parts, one at a time. Measure the AC voltage across the combination of 1500 ohm resistor and .15 mfd capacitor. Reverse the AC plug by using a non-polarized adaptor and repeat AC voltage measurements for each exposed metallic part. Voltage me

23、asured must not exceed 0.75 volts RMS. This corresponds to 0.5 milliamp AC. Any value exceeding this limit consti- tutes a potential shock hazard and must be corrected immediately. TIPS ON PROPER INSTALLATION 1. Never install any receiver in a closed-in recess, cubbyhole, or closely fitting shelf sp

24、ace over, or close to, a heat duct, or in the path of heated air flow. 2. Avoid conditions of high humidity such as: outdoor patio installations where dew is a factor, near steam radiators where steam leakage is a factor, etc. 3. Avoid placement where draperies may obstruct venting. The customer sho

25、uld also avoid the use of decorative scarves or other coverings that might obstruct ventilation. 4. Wall- and shelf-mounted installations using a commercial mounting kit must follow the factory-approved mounting instructions. A product mounted to a shelf or platform must retain its original feet (or

26、 the equivalent thickness in spacers) to provide adequate air flow across the bottom. Bolts or screws used for fasteners must not touch any parts or wiring. Perform leakage tests on customized installations. 5. Caution customers against mounting a product on a sloping shelf or in a tilt- ed position

27、, unless the receiver is properly secured. 6. A product on a roll-about cart should be stable in its mounting to the cart. Caution the customer on the hazards of trying to roll a cart with small cast- ers across thresholds or deep pile carpets. 7. Caution customers against using extension cords. Exp

28、lain that a forest of extensions, sprouting from a single outlet, can lead to disastrous conse- quences to home and family. A.C. Voltmeter 1500 OHM 10 WATT Place this probe on each exposed metal part. Good Earth Ground such as the Water Pipe, Conduit, etc. 0.15uF PRODUCT SAFETY SERVICING GUIDELINES

29、FOR VIDEO PRODUCTS 1-4 SERVICING PRECAUTIONS CAUTION : Before servicing the DVD Recorder covered by this service data and its supplements and addends, read and follow the SAFETY PRECAUTIONS. NOTE : if unforeseen circumstances create conflict between the following servic- ing precautions and any of t

30、he safety precautions in this pub- lications, always follow the safety precautions. Remembers Safety First: General Servicing Precautions 1. Always unplug the DVD Recorder AC power cord from the AC power source before: (1)Removing or reinstalling any component, circuit board, module, or any other as

31、sembly. (2)Disconnection or reconnecting any internal electrical plug or other electrical connection. (3)Connecting a test substitute in parallel with an elec- trolytic capacitor. Caution : A wrong part substitution or incorrect polarity installation of electrolytic capacitors may result in an explo

32、sion hazard. 2. Do not spray chemicals on or near this DVD Recorder or any of its assemblies. 3. Unless specified otherwise in this service data, clean electrical contacts by applying an appropriate contact cleaning solution to the contacts with a pipe cleaner, cotton-tipped swab, or comparable soft

33、 applicator. Unless specified otherwise in this service data, lubrication of contacts is not required. 4. Do not defeat any plug/socket B+ voltage interlocks with whitch instruments covered by this service manual might be equipped. 5. Do not apply AC power to this DVD Recorder and/or any of its elec

34、trical assemblies unless all solid-state device heat sinks are cerrectly installed. 6. Always connect test instrument ground lead to the appropriate ground before connection the test instrument positive lead. Always remove the test instrument ground lead last. Insulation Checking Procedure Disconnec

35、t the attachment plug from the AC outlet and turn the power on. Connect an insulation resistance meter(500V) to the blades of the attachment plug. The insulation resis- tance between each blade of the attachment plug and acces- sible conductive parts (Note 1) should be more than 1M- ohm. Note 1 : Ac

36、cessible Conductive Parts including Metal pan- els, Input terminals, Earphone jacks, etc. Electrostatically Sensitive (ES) Devices Some semiconductor (solid state) devices can be damaged easily by static electricity. Such components commonly are called Electrostatically Sensitive (ES) Devices. Examp

37、les of typical ES devices are integrated circuits and some field effect transistors and semiconductor chip components. The following techniques should be used to help reduce the incidence of component damage caused by static electricity. 1. Immediately before handling any semiconductor compo- nent o

38、r semiconductor-equipped assembly, drain off any electrostatic charge on your body by touching a known earth ground. Alternatively, obtain and wear a commer- cially available discharging wrist strap device, which should be removed for potential shock reasons prior to applying power to the unit under

39、 test. 2. After removing an electrical assembly equipped with ES devices, place the assembly on a conductive surface such as aluminum foil, to prevent electrostatic charge buildup or exposure of the assembly. 3. Use only a grouned-tip soldering iron to solder or unsolder ES devices. 4. Use only an a

40、nti-static solder removal device. Some solder removal devices not classified a “anti-static” can generate electrical charges sufficient to damage ES devices. 5. Do not use freon-propelled chemicals. These can generate electrical charge sufficient to damage ES devices. 6. Do not remove a replacement

41、ES device from its protec tive package until immediately before you are ready to install it. (Most replacement ES devices are packaged with leads electrically shorted together by conductive foam, aluminum foil, or comparable conductive material). 7. Immediately before removing the protective materia

42、l from the leads of a replacement ES device, touch the protective material to the chassis or circuit assembly into which the device will be installed. Caution : Be sure no power is applied to the chassis or circuit, and observe all other safety precautions. 8. Minimize bodily motions when handling u

43、npackaged replacement ES devices. (Normally harmless motion such as the brushing together of your clothes fabric or the lifting of your foot from a carpeted floor can generate static elec- tricity sufficient to damage an ES device.) 1-6 SPECIFICATIONS GENERAL Power requirementsAC 200-240V, 50/60 Hz

44、Power consumption44W Dimensions (approx.)430 X 92 X 382.5 mm (16.9 x 3.6 x 15 inches) (w x h x d) Mass (approx.)6.4 kg (14.1 lbs) Operating temperature5C to 35C (41F to 95F) Operating humidity5 % to 90 % Television systemPAL B/G colour system Recording formatPAL RECORDING Recording formatDVD VideoRe

45、cording, DVD-VIDEO Recordable discsDVD-ReRecordable, DVD-Recordable Recordable timeApprox. 1 hour (HQ mode), 2 hours (SQ mode), 4 hours (LQ mode) Video recording format Sampling frequency27MHz Compression formatMPEG 2 Audio recording format Sampling frequency48kHz Compression formatDolby Digital DVD

46、 SPECIFICATIONS Laser systemSemiconductor laser Frequency responseDVD (PCM 48 kHz): 8 Hz to 22 kHz, CD: 8 Hz to 20 kHz Signal-to-noise ratioMore than 100 dB Harmonic distortionLess than 0.008% Dynamic rangeMore than 95 dB INPUTS AERIAL INAerial input, 75 ohms VIDEO IN1.0 Vp-p 75 ohms, sync negative,

47、 RCA jack x 2 / SCART AUDIO IN0 dBm more than 47 kohms, RCA jack (L, R) x 2 / SCART DV IN4 pin (i.LINK/IEEE 1394 standard) OUTPUTS VIDEO OUT1 Vp-p 75 , sync negative, RCA jack x 1 S-VIDEO OUT(Y) 1.0 V (p-p), 75 , negative sync, Mini DIN 4-pin x 1 (C) 0.3 V (p-p) 75 COMPONENT VIDEO OUT(Y) 1.0 V (p-p)

48、, 75 , negative sync, RCA jack x 1 (Pb)/(Pr) 0.7 V (p-p), 75 , RCA jack x 2 Audio output (digital audio)0.5 V (p-p), 75 , RCA jack x 1 Audio output (optical audio)5 V (p-p), 75 , Optical connector x 1 Audio output (analog audio)2.0 Vrms (1 KHz, 0 dB), 600 , RCA jack (L, R) x 1 / SCART ACCESSORY: Video cable.1Audio cable . . . . . . . . . . . . . . .1 RF Coaxial Cable.1Blank DVD-R disc . . . . . . . . . .2 Remote control .1Batteries . . .