Rotel-RCD-02-OM 电路图 维修手册.pdf

《Rotel-RCD-02-OM 电路图 维修手册.pdf》由会员分享，可在线阅读，更多相关《Rotel-RCD-02-OM 电路图 维修手册.pdf（46页珍藏版）》请在收音机爱好者资料库上搜索。

1、Owners Manual Manuel de lutilisateur Bedienungsanleitung Manuale di Istruzioni Manual de Instrucciones Gebruiksaanwijzing Bruksanvisning RCD-02 Stereo Compact Disc Player Lecteur de disque compact Stereo-CD-Player Lettore CD Reproductor de Discos Compactos CD-Speler CD-spelare RadioFans.CN 收音机爱 好者资料

2、库 2 Important Safety Instructions WARNING: There are no user serviceable parts inside. Refer all servicing to qualifi ed service personnel. WARNING: To reduce the risk of fi re or electric shock, do not expose the unit to moisture or water. Do not allow foreign objects to get into the enclosure. If

3、the unit is exposed to moisture, or a foreign object gets into the enclosure, im- mediately disconnect the power cord from the wall. Take the unit to a qualifi ed service person for inspection and necessary repairs. Read all the instructions before connecting or operating the component. Keep this ma

4、nual so you can refer to these safety instructions. Heed all warnings and safety information in these instructions and on the product itself. Follow all operating instructions. Clean the enclosure only with a dry cloth or a vacuum cleaner. You must allow 10 cm or 4 inches of unobstructed clearance a

5、round the unit. Do not place the unit on a bed, sofa, rug, or similar surface that could block the ventilation slots. If the component is placed in a bookcase or cabinet, there must be ventilation of the cabinet to allow proper cooling. Keep the component away from radiators, heat registers, stoves,

6、 or any other appliance that produces heat. The unit must be connected to a power supply only of the type and voltage specified on the rear panel of the unit. Connect the component to the power outlet only with the supplied power supply cable or an exact equivalent. Do not modify the supplied cable

7、in any way. Do not attempt to defeat grounding and/or polarization provisions. Do not use extension cords. Do not route the power cord where it will be crushed, pinched, bent at severe angles, exposed to heat, or damaged in any way. Pay par- ticular attention to the power cord at the plug and where

8、it exits the back of the unit. The power cord should be unplugged from the wall outlet if the unit is to be left unused for a long period of time. Immediately stop using the component and have it inspected and/or serviced by a qualified service agency if: The power supply cord or plug has been damag

9、ed. Objects have fallen or liquid has been spilled into the unit. The unit has been exposed to rain. The unit shows signs of improper operation The unit has been dropped or damaged in any way Place the unit on a fixed, level surface strong enough to support its weight. Do not place it on a moveable

10、cart that could tip over. IMPORTANT FOR LASER PRODUCTS 1. CLASS 1 LASER PRODUCT 2. DANGER: Visible laser radiation when open and interlock failed or bypassed. Avoid direct exposure to beam. 3. CAUTION: Do not open the top cover. There are no user serviceable parts inside the player; leave all servic

11、ing to qualified service person- nel. WARNING! To reduce the risk of electrical shock, fires, etc.: 1. Do not remove screws, covers or cabinet. 2. Do not expose the unit to rain or moisture. 3. Do not touch the power cord or plug with wet hands. RCD-02 Stereo Compact Disc Player RadioFans.CN 收音机爱 好者

12、资料库 3English Figure 1: Controls and Connections Commandes et branchements Bedienelemente und Anschlsse Comandi e Collegamenti Controles y Conexiones Bedieningsorganen en aansluitingen Funktioner och anslutningar Figure 2: RR-D95 Remote Control Tlcommande RR-D95 Fernbedienung RR-D95 Comando a Distanz

13、a RR-D95 Mando a Distancia RR-D95 De RR-D95 afstandsbediening RR-D95 Fjrrkontroll RR-D95 OPN/CLS TIMECLEARPROGREV REPEATRANDOMSCAN 10 123 456 78 0 9 RadioFans.CN 收音机爱 好者资料库 4 DOUBLE INSULATIONWhen servicing WARNING: DO NOT EXPOSE THIS EQUIPMENT TO RAIN OR MOISTURE GND LEFT PHONOTUNERAUX 1AUX 2TAPE 1

14、PRE OUT SPEAKER A EXT REM IN IR OUT 12V TRIGGER OUT 12 LEFT INOUT SPEAKER B INTEGRATED AMPLIFIER MODEL NO. RA-02 POWER CONSUMPTION: 220W LEFT ROTEL RA-02 ROTEL RCD-02 12V TRIGEXT REM ININ Figure 3: Analog Outputs Sorties analogiques Analoge Ausgnge Uscite Analogiche Salidas Analgicas De analoge uitg

15、angen Analoga utgngar Figure 4: Digital Outputs Sorties numriques Digitalausgang Uscite Digitali Salidas Digitales De digitale uitgangen Digitala utgngar 2 VIDEO INTAPE INPUT 1435IN CD 2 L R VIDEO OUT 2 DIGITAL INPUT 1 3 2 COAXIALOPTICAL COAXIALOPTICAL DIGITAL OUPUT 13 2 COMPOSITE IN 14352 COMPOSITE

16、 OUT 13 3 2 S-VIDEO IN 14352 S-VIDEO OUT 13 L R CENTER SUB WOOFER ZONE OUT ZONE REM IR OUT 12 EXT REM 12V TRIGGER OUT REARFRONT L R MONITOR OUT CENTER SUB WOOFER REARFRONT L R ANTENNA OUTPUT CAUTION RISK OF ELECTRIC SHOCK AVIS:NE PAS OUVRIR WARNING: WARNING: DO NOT EXPOSE THIS EQUIPMENT TO RAIN OR M

17、OISTURE. System, Inc. US Pat. No. 5,451,242 and other world-wide patents, issues and pending. DTS, DTS Digital surround, are trademarks of Digital Theater System, Inc. Copyright 1996 Digital This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1)

18、 This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. 21 Y CR CB INMONITOR OUT unpublished works FRONT R REAR L R CENTER AM LOOP SURROUND SOUND RECEIVER MODEL NO. RSX-972 POWER CONSUMPTIO

19、N: 850 WATTS RSX-972 L IN1 2 SPEAKER IMPEDANCE 8 OHMS MINIMUM RSX-972 ROTEL RCD-02 12V TRIGEXT REM ININ RCD-02 Stereo Compact Disc Player 5English About Rotel A family whose passionate interest in music led them to manufacture high fi delity components of uncompromising quality founded Rotel over 40

20、 years ago. Through the years that passion has remained undiminished and the family goal of providing exceptional value for audiophiles and music lovers regardless of their budget, is shared by all Rotel employees. The engineers work as a close team, listening to, and fi ne tuning each new product u

21、ntil it reaches their exacting musical standards. They are free to choose components from around the world in order to make that product the best they can. You are likely to fi nd capacitors from the United Kingdom and Germany, semi conductors from Japan or the United States, while toroidal power tr

22、ansformers are manufactured in Rotels own factory. Rotels reputation for excellence has been earned through hundreds of good reviews and awards from the most respected reviewers in the industry, who listen to music every day. Their comments keep the company true to its goal - the pursuit of equipmen

23、t that is musical, reliable and affordable. All of us at Rotel, thank you for buying this product and hope it will bring you many hours of enjoyment. Getting Started Thank you for purchasing the Rotel RCD-02 Stereo Compact Disc Player. Its precision transport is back up by an 18-bit equivalent, mult

24、i-level Delta-Sigma D/A converter with 8x oversampling and HDCD. These features, combined with Rotels Balanced Design, ensure the RCD-02 will deliver the highest level of audio performance. When used in a high- quality audio system, your Rotel CD player will provide years of enjoyment. A Few Precaut

25、ions Please read this manual carefully. In addition to installation and operating instructions, it provides valuable information on various RCD-02 system confi gurations as well as general information that will help you get optimum performance from your system. Please contact your authorized Rotel d

26、ealer for answers to any quesions you might have. In addition, all of us at Rotel welcome your questions and comments. Save the RCD-02 shipping carton and all enclosed packing material for future use. Shipping or moving the RCD-02 in anything other than the original packing material may result in se

27、vere damage that is not covered by the warranty. Fill out and send in the owners registration card packed with the RCD-02. Also be sure to keep the original sales receipt. It is your best record of the date of purchase, which you will need in the event warranty service is required. Placement Use com

28、mon sense when placing the RCD-02 in a cabinet or when stacking other equipment. Make sure that the shelf or cabinet can support its weight. Do not stack heavy components on top of the RCD-02. Avoid placing the unit where it may be subject to excessive heat such as on top of a large power amplifi er

29、 or near a heat register. For best performance, avoid placing the unit where it may be subject to vibration, such as near a speaker. Control Identifi cation The cover of this manual has a fold out panel that shows illustrations of the front and rear panels and the RR-D95 remote control. Each item in

30、 the illustrations is identifi ed with a call out in a gray box. Through out this manual the items refered to in the text are identifi ed by the corresponding call out. The items on the front and rear panels are identifi ed with a number call out, such a 1. The items on the remote control are labele

31、d with a letter call out, such as A. h, HDCD , High Defi nition Compatible Digital and Pacific Microsonics are either registered trademarks or trademarks of Pacific Microsonics, Inc. in the United States and/or other countries.HDCD system manufactured under license from Pacific Microsonics, Inc. Thi

32、s product is covered by one or more of the following: In the USA: 5,479,168, 5,638,074, 5,640,161, 5,808,574, 5,838,274, 5,854,600, 5,872,531 and in Australia: 669114. Other patents pending. Contents Figure 1: Controls and Connections 3 Figure 2: RR-D95 Remote Control 3 Figure 3: Analog Outputs 4 Fi

33、gure 4: Digital Outputs 4 About Rotel .5 Getting Started .5 A Few Precautions 5 Placement 5 Control Identifi cation 5 AC Power and Control .6 AC Power Input r 6 Power Switch 1 and Power Indicator 2 6 Output Connections .6 Analog Outputs = 6 Digital Output q 6 Operation .6 Infrared Remote Control 5 6

34、 Display 6 6 Disc Drawer 4 6 Transport Control Buttons .7 OPEN/CLOSE Button 7A 7 PLAY Button 8M 7 STOP Button 9F 7 PAUSE Button 0N 7 TRACK Buttons -L 7 DIRECT ACCESS Buttons B 7 SEARCH Buttons K 7 Additional Features .7 HDCD 3 7 PROGRAM Button J 7 REVIEW Button I 8 CLEAR Button H 8 RANDOM Button D 8

35、 REPEAT Button C 8 SCAN Button E 8 TIME Button G 8 External Remote Input e .8 12V Trigger Connection w .8 Troubleshooting .9 Power Indicator Is Not Lit 9 Fuse Replacement 9 No Sound 9 Specifi cations .9 6 AC Power and Control AC Power Input r Your RCD-02 is confi gured at the factory for the proper

36、AC voltage in the country where you purchased it (either 115 volts or 230/ 240 volts. The AC line confi guration is noted on a decal on the back panel. NOTE: Should you move your CD player to another country, it may be possible to reconfigure it for use on a different line voltage. Do not attempt to

37、 perform this conversion yourself. Opening the enclosure of the RCD-02 exposes you to dangerous voltages. Consult a qualified service person or the Rotel factory service department for information. The RCD-02 should be plugged directly into a 2-pin polarized wall outlet or into the switched outlet o

38、n another component in your audio system. Do not use an extension cord. Be sure the power switch on the front panel of the RCD-02 is turned off (in the “out” position). Then, connect the supplied power cord to the AC power receptacle on the rear of the unit and the AC power outlet. If you are going

39、to be away from home for an extended period of time such as a month-long vacation, it is a sensible precaution to unplug your CD player (as well as other audio and video components) while you are away. Power Switch 1 and Power Indicator 2 The power switch is located on the front panel of your CD pla

40、yer. To turn the CD player on, push the switch in. The LED indicator above the switch and the Display will light up, indicating that the CD player is turned on. To turn the CD player off, push the button again and return it to the “out” position. NOTE: If you are using a switched outlet to turn on a

41、nd off your CD player, you should leave the power switch in the “on” position. When AC power is applied to the unit, it will power up in fully active mode. Output Connections The RCD-02 gives you a choice of two different kinds of output connections an analog output signal from the built-in D/A conv

42、erter for use with conventional analog audio components and a coax digital output which provides an unprocessed digital data signal for use with outboard D/A converters or digital processors. NOTE: To prevent loud noises that neither you nor your speakers will appreciate, make sure the CD player is

43、turned off when you make any signal connections. Analog Outputs = See Figure 3 for wiring illustration A pair of standard RCA jacks supplies an analog output signal from the RCD-02 to the source inputs of an audio preamplifi er, in- tegrated amplifi er, or receiver. Select high quality audio interco

44、nnect cables. Connect the left channel output of the RCD-02 to the left channel source input on the preamplifi er or other component. Connect the right output of the RCD-02 to the right channel source input on the preamplifi er or other component. Digital Output q See Figure 4 for wiring illustratio

45、n If you are using an outboard D/A converter or other digital processor, you will need an unprocessed digital data stream from the RCD-02, taken before the built-in D/A converter. This signal is supplied by the RCD- 02s back-panel digital output jack. Using a standard 75 ohm coax digital cable, conn

46、ect the RCD-02s coax digital output to the coax digital input connector on the outboard D/A converter. Operation The RCD-02 can be operated using its front panel buttons or from corresponding buttons on the supplied infrared remote control. Specifi c instructions for each of these controls are detai

47、led below. Most of the buttons are duplicated on the front panel and on the IR remote control. However, there are a few exceptions where the buttons are only available on one or the other. These exceptions are noted in the instructions. Infrared Remote Control 5 Before using the IR remote control, i

48、t is necessary to install two “UM-4/AAA” batteries (supplied). Remove the plastic cover on the back of the IR remote, install the batteries (observing the + and polarity indications), and reinstall the cover. To use the IR remote control, aim it at the IR sensor 5 located in the Display area on the front panel of the RCD-02. Display 6 A lighted Display on the front panel of the RCD-02 provides useful information about the status of the unit, activ