Rotel-RDV-1045-OM 电路图 维修手册.pdf

《Rotel-RDV-1045-OM 电路图 维修手册.pdf》由会员分享，可在线阅读，更多相关《Rotel-RDV-1045-OM 电路图 维修手册.pdf（26页珍藏版）》请在收音机爱好者资料库上搜索。

1、Owners Manual RDV-1045 DVD Player V CD GRPG PL TRTITLE VRDVDWMA CHAP PRGM RND GRALL TIMER MP3 3D PHONICBONUSB.S.PPROGRESSIVE A - B Register your product at www.R RadioFans.CN 收音机爱 好者资料库 2RDV-1045 DVD Player Rotel products are designed to comply with international directives on the Restriction of Haz

2、ardous Substances (RoHS) in electrical and electronic equipment and the disposal of Waste Electrical and Electronic Equipment (WEEE). The crossed wheelie bin symbol indicates compliance and that the products must be appropriately recycled or processed in accordance with these directives. Important S

3、afety Instructions WARNING: There are no user serviceable parts inside. Refer all servicing to qualifi ed service personnel. WARNING: To reduce the risk of fi re or electric shock, be sure that the apparatus shall not be exposed to dripping or splashing and that no objects fi lled with liquids, such

4、 as vases, shall be placed on the apparatus. Do not allow foreign objects to get into the enclosure. If the unit is exposed to moisture, or a foreign object gets into the enclosure, immediately disconnect the power cord from the wall. Take the unit to a qualifi ed service person for inspection and n

5、ecessary repairs. Read all the instructions before connecting or operating the component. Keep this manual so you can refer to these safety instructions. Heed all warnings and safety information in these instructions and on the product itself. Follow all operating instructions. Clean the enclosure o

6、nly with a dry cloth or a vacuum cleaner. You must allow 10 cm or 4 inches of unobstructed clear- ance around the unit. Do not place the unit on a bed, sofa, rug, or similar surface that could block the ventilation slots. If the component is placed in a bookcase or cabinet, there must be ventilation

7、 of the cabinet to allow proper cooling. Keep the component away from radiators, heat registers, stoves, or any other appliance that produces heat. The unit must be connected to a power supply only of the type and voltage specifi ed on the rear panel of the unit. Connect the component to the power o

8、utlet only with the supplied power supply cable or an exact equivalent. Do not modify the supplied cable in any way. Do not attempt to defeat grounding and/or polarization provisions. Do not use extension cords. Do not route the power cord where it will be crushed, pinched, bent at severe angles, ex

9、posed to heat, or damaged in any way. Pay particular attention to the power cord at the plug and where it exits the back of the unit. The power cord should be unplugged from the wall outlet if the unit is to be left unused for a long period of time. Immediately stop using the component and have it i

10、nspected and/or serviced by a qualifi ed service agency if: The power supply cord or plug has been damaged. Objects have fallen or liquid has been spilled into the unit. The unit has been exposed to rain. The unit shows signs of improper operation The unit has been dropped or damaged in any way Plea

11、se use Class 2 Wiring when connecting the speaker terminals of the unit to ensure proper insulation and minimize the risk of electrical shock. IMPORTANT FOR LASER PRODUCTS 1. CLASS 1 LASER PRODUCT 2. DANGER: Visible laser radiation when open and interlock failed or bypassed. Avoid direct exposure to

12、 beam. 3. CAUTION: Do not open the top cover. There are no user serviceable parts inside the player; leave all servicing to qualifi ed service personnel. WARNING! To reduce the risk of electrical shock, fi res, etc.: 1. Do not remove screws, covers or cabinet. 2. Do not expose the unit to rain or mo

13、isture. 3. Do not touch the power cord or plug with wet hands. This symbol means that this unit is double insulated. An earth connection is not required. Place the unit on a fi xed, level surface strong enough to support its weight. Do not place it on a moveable cart that could tip over. V CD GRPG P

14、L TRTITLE VRDVDWMA CHAP PRGM RND GRALLTIMER MP3 3D PHONICBONUSB.S.PPROGRESSIVE A - B RadioFans.CN 收音机爱 好者资料库 3English Figure 1: RR-DV99 Remote Control 1 POWER button Press to turn the RDV-1045 on or off (standby). 2 DISPLAY button Press to change the information shown in the display window. 3 VSS bu

15、tton Turn on/off the simulated Virtual Surround Sound system. 4 Repeat button Switches the RDV-1045 among the various repeat modes. 5 TOP MENU button Press to display a menu to select specifi c scenes on a disc. 6 CURSOR p and Button 7 CURSOR t Button Press to select an item from a menu or on-screen

16、 display, or to change the setting of an item in the on-screen display. 8 ENTER button Press to accept selections from menus or on-screen displays. 9 SETUP button Press to access the Setup menu and select settings for language display, video, audio and several other operation controls. 0 Numeric but

17、tons Use these to select a title or track number. - SUBTITLE button Used to activate the on-screen subtitle selection display and to turn the subtitle on or off (for DVD VIDEO). = ANGLE button Changes camera angles when playing a DVD VIDEO disc that has multiple camera angles. q PAGE button Some Aud

18、io DVDs have Browsable Still Pictures. This button changes the picture being viewed. w REPLAY button Press to replay the previous 10 seconds of a DVD. e P.SCAN button Press to select an ouput signal that is compatible with your television NTSC, NTSC Progressive, PAL or PAL Progressive. r / (PLAY) bu

19、tton Starts playback of a disc. t . (STOP)/CLEAR button Stops playback. y /PREVIOUS button u /NEXT button Press to skip forward or back a chapter, title or track. Hold down the button during to playback rapidly scan to earlier or later scenes. Also used for the page selection from menu screens (VCD

20、and SVCD only). i Infrared signal output window Point this toward the remote sensor on the front panel when pressing buttons. o OPEN/CLOSE button Opens and closes the disc tray. p DIMMER button Press to change the brightness of the display window RETURN button Press to go back to the previous menu d

21、uring PBC playback of VCD or SCVD discs. MENU button Displays menus that let you make select items from the disc. CURSOR u Button a CURSOR q Button Press to select an item from a menu or on-screen display, or to change the setting of an item in the on-screen display. s ON SCREEN Button Press to disp

22、lay the status bar and the menu bar on the TV screen. d AUDIO Button Press to select the audio language on discs that have soundtracks in multiple languages. f CANCEL Button Press to remove selections from a programmed playback list. g VFP button Presss to access the Video Fine Processor to adjust s

23、ettings such a brightness, contrast, etc. h ZOOM button Press to change the magnifi cation of the picture on the screen. j P. Mode button Press the Play Mode button to change among regular play, program play and random play modes. k , (PAUSE) button Pauses playback. l /SLOW + button ; /SLOW button D

24、uring playback press repeatedly to speed up or slow down playback speed. When disc play is paused press repeatedly to play forward or backward at reduced speed. p t u q RadioFans.CN 收音机爱 好者资料库 4RDV-1045 DVD Player Figure 2: Front Panel Controls VCD GRPG PL TRTITLE VRDVDWMA CHAP PRGM RND GRALL TIMER

25、MP3 3D PHONICBONUSB.S.PPROGRESSIVE A - B Figure 3: Display Window A Disc Content indicators B VSS (3D Phonic) indicator C Browsable Still Pictures indicator D Progressive Scan indicator E Original Program/Play List indicators F Track/Chapter indicators G Programmed Playback indicator H Random Play i

26、ndicator I Group/All Repeat Play indicator J Specifi ed Section Repeat Play indicator K Multi-Purpose Display 1 STANDBY button Turns the unit on or off (standby). 2 STANDBY indicator Lights when the power cord is connected and the unit is on standby. When the unit is turned on, the STANDBY indicator

27、 goes off. 3 Remote sensor Receives the signal from the remote control unit. 4 Disc tray Used to load discs. 5 Display Window Shows various indicators and information about the operation of the RDV-1045. 6 OPN/CLS (OPEN/CLOSE) button Opens and closes the disc tray. 7 . (STOP) button Stops playback.

28、Also used to erase tracks from a programmed play list. 9 /, (PLAY/PAUSE) button Starts and pauses playback. Also, used as a SELECT button for PBC of Video CDs. 8 (SKIP) buttons Used to skip a chapter, title or track. Also used for the page selection of a menu screen (for DVD Video/Video CD). Holding

29、 down during playback reverses or advances playback rapidly. V CD PG PL TR VRDVDWMA CHAP PRGM RND GRALL MP3 3D PHONICB.S.PPROGRESSIVE A - B 5English About Rotel A family whose passionate interest in music led them to manufacture high fi delity components of uncompromising quality founded Rotel over

30、45 years ago. Through the years that passion has remained undiminished and the family goal of providing exceptional value for audiophiles and music lovers regardless of their budget, is shared by all Rotel employees. The engineers work as a close team, listening to, and fi ne tuning each new product

31、 until it reaches their exacting musical standards. They are free to choose components from around the world in order to make that product the best they can. You are likely to fi nd capacitors from the United Kingdom and Germany, semi con- ductors from Japan or the United States, while toroidal powe

32、r transformers are manufactured in Rotels own factory. Rotels reputation for excellence has been earned through hundreds of good reviews and awards from the most respected reviewers in the industry, who listen to music every day. Their comments keep the company true to its goal - the pursuit of equi

33、pment that is musical, reliable and affordable. All of us at Rotel, thank you for buying this product and hope it will bring you many hours of enjoyment. About This Manual Throughout this manual the controls and com- ponents of the RDV-1045 are identifi ed with numbers and letters in dark gray circl

34、es. Num- bers in circles such as o identify items on the RR-DV99 remote control. (To help you remember this think of “round equals remote”.) Numbers in squares such as 9 identify items on the front and rear panel of the unit. Letters in circles such as A identify items in the front panel display win

35、dow. In the operation section of the manual some function descriptions apply only to certain kinds of discs. The types of discs to which the information applies are indicated with symbols such as . Contents Important Safety Instructions .2 Figure 1: RR-DV99 Remote Control 3 Figure 2: Front Panel Con

36、trols 4 Figure 3: Display Window 4 About Rotel .5 About This Manual .5 Figure 4: Rear Panel Connections 6 About the RDV-1045 .6 Precautions .6 Placement 6 Audio/Video Connections .6 Component Input TV Connection 7 Composite Input TV Connection 7 S-Video Input TV Connection 7 Connecting to Audio Equi

37、pment with a Digital Input 8 Connecting to an Audio Amplifi er or Receiver 8 Connecting the Power Cord .9 AC Input 0 9 RR-DV99 Remote Control .9 Installing the Batteries 9 Precautions for the safe use of batteries 9 Using the Remote Control 9 Remote Control Numeric Buttons 9 External Remote In r 9 P

38、layable Discs .10 Notes on Discs 10 Invalid Operation Icon 10 Unplayable Discs .10 Notes About Disc Copying .10 About Copyright Laws 10 About the Copy Guard System 10 Disc Care and Handling .11 DVD Video Disc Region Codes .11 Initial Setup .11 Turning On the RDV-1045 11 Turn On Messages 11 Setting t

39、he Output Signal Type 11 Selecting Preferences 11 Changing the Display Window Brightness 11 Playing a DVD or CD .12 On-Screen Menu 12 Selecting a Track/Chapter with the Numeric Buttons 12 Playing Other Discs .12 On Screen Icons .12 Display Window .12 DVD VIDEO/DVD AUDIO/DVD VR 12 VCD/SVCD 12 CD 13 M

40、P3/WMA/ASF/MPEG1/MPEG2 disc 13 JPEG disc 13 Changing the Display Window Information 13 Other Disc Play Controls .13 Pausing Playback 13 Fast Forward/Reverse Search 13 Slow Motion Playback 13 Skip to Beginning or End 14 One Touch Replay 14 Skipping 5 Minute Intervals 14 Advancing Frame by Frame 14 Re

41、suming Playback 14 Other Playback Features .14 Menu Screen Track Selection 14 Programmed Playback 15 Random Playback 15 Repeat Playback 16 A-B Repeat Playback 16 Other Control Features .16 Selecting the Subtitle Language 16 Selecting the Audio Language 16 Selecting the Viewing Angle 16 Magnifying th

42、e Picture (Zoom) 17 Adjusting the Picture Quality (VFP) 17 Browsable Still Pictures (BSP) 17 VSS - Simulated Surround Sound 17 Menu and Status Bar .18 Menu Bar Functions 18 Time Search .18 Preference Setup .19 Language Menu 19 Picture Menu 19 Audio Menu 19 Others Menu 19 Caring for the RDV-1045 .20

43、Cabinet and Disc Tray Cleaning 20 Condensation 20 Locking the Disc Tray .20 Disc Structure .20 DVD VIDEO/DVD VR 20 DVD AUDIO 20 VCD/SVCD/CD 20 MP3/WMA/JPEG/ASF/MPEG1/MPEG2 Discs 20 Additional Disc Information 20 Troubleshooting .22 Power source 22 Operation 22 Images 22 Other 22 If Problems Persist

44、22 Language Codes .23 Digital Audio Output Table .23 Specifi cations .24 Video Characteristics 24 Audio output 24 Audio Characteristics 24 General Characteristics 24 6RDV-1045 DVD Player About the RDV-1045 Thank you for purchasing the Rotel RDV-1045. It will provide years of enjoyment when used in a

45、 high-quality audio/video system. The RDV-1045 is one of the most fl exible compo- nents you can add to your audio/video system. In addition to DVD Video discs, the RDV-1045 can play Video and audio CD discs recorded in a variey of formats. It provides a full range of operating features and control functions. Angle function* You can select a desired angle from m