Tascam_US-2000_Manual 电路图 维修手册.pdf

《Tascam_US-2000_Manual 电路图 维修手册.pdf》由会员分享，可在线阅读，更多相关《Tascam_US-2000_Manual 电路图 维修手册.pdf（24页珍藏版）》请在收音机爱好者资料库上搜索。

1、US-2000 USB 2.0 Audio Interface D01088620A OWNERS MANUAL RadioFans.CN 收音机爱 好者资料库 IMPORTANT SAFETY PRECAUTIONS 2 TASCAM US-2000 The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the lit

2、erature accompanying the appliance. The lightning flash with arrowhead symbol, within equilateral triangle, is intended to alert the user to the presence of uninsulated “dangerous voltage” within the products enclosure that may be of sufficient magnitude to constitute a risk of electric shock to per

3、sons. CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. WARNING: TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. This appliance has a serial number located

4、 on the rear panel. Please record the model number and serial number and retain them for your records. Model number Serial number In North America use only on 120V supply. CE Marking Information a) Applicable electromagnetic environment: E4 b) Peak inrush current: 1.1 A TO THE USER This equipment ha

5、s been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, an

6、d can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to

7、correct the interference at his own expense. CAUTION Changes or modifications to this equipment not expressly approved by TEAC CORPORATION for compliance could void the users authority to operate this equipment. For U.S.A. RadioFans.CN 收音机爱 好者资料库 IMPORTANT SAFETY INSTRUCTIONS TASCAM US-2000 3 Do not

8、 expose this apparatus to drips or splashes. Do not place any objects filled with liquids, such as vases, on the apparatus. Do not install this apparatus in a confined space such as a book case or similar unit. The apparatus draws nominal non-operating power from the AC outlet with its POWER or STAN

9、DBY/ON switch not in the ON position. The apparatus should be located close enough to the AC outlet so that you can easily grasp the power cord plug at any time. The mains plug is used as the disconnect device, the disconnect device shall remain readily operable. Products with Class I construction a

10、re equipped with a power supply cord that has a 3-prong grounding plug. The cord of such a product must be plugged into an AC outlet that has a protective grounding connection. If the product uses batteries (including a battery pack or installed batteries), they should not be exposed to sunshine, fi

11、re or excessive heat. CAUTION for products that use replaceable lithium batteries: there is danger of explosion if a battery is replaced with an incorrect type of battery. Replace only with the same or equivalent type. Caution should be taken when using earphones or headphones with the product becau

12、se excessive sound pressure (volume) from earphones or head- phones can cause hearing loss. If you are experiencing problems with this product, contact TEAC for a service referral. Do not use the product until it has been repaired. RACK-MOUNTING THE UNIT Use the supplied rack-mounting kit to mount t

13、he unit in a standard 19-inch rack, as shown below. Remove the feet of the unit before mounting. NOTE Leave 1U of space above the unit for ventilation. Allow at least 10 cm (4 in) at the rear of the unit for ventilation. 1 Read these instructions. 2 Keep these instructions. 3 Heed all warnings. 4 Fo

14、llow all instructions. 5 Do not use this apparatus near water. 6 Clean only with dry cloth. 7 Do not block any ventilation openings. Install in accordance with the manufacturers instructions. 8 Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (includ

15、ing amplifiers) that produce heat. 9 Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safe

16、ty. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet. 10 Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus. 11 Only use attachments/a

17、ccessories specified by the manufacturer. 12 Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over. 13 Unplug this apparatus during

18、lightning storms or when unused for long periods of time. 14 Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the

19、apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped. RadioFans.CN 收音机爱 好者资料库 IMPORTANT SAFETY PRECAUTIONS 4 TASCAM US-2000 Contents 1 Introduction .5 Main features .5 Included items .5 About this manual .5 Trademarks .6 Precautions and notes for placement a

20、nd use .6 Beware of condensation .6 Cleaning the unit .6 2 Names and Functions of Parts .7 Front panel .7 Rear panel .8 3 Installation .9 System requirements .9 Windows.9 Mac OS X .9 Installing the driver .9 Installing the driver for Windows .9 Installing the driver for Mac OS X . 11 Uninstalling th

21、e driver . 11 Frequently asked installation questions and answers (FAQ) . 11 Settings on your computer . 11 Installing Cubase LE4 . 11 4 US-2000 Control panel settings .12 Overview . 12 Control panel settings . 12 Audio Performance . 12 Sample Clock Source . 12 Digital Output Format . 12 Digital Out

22、put Chanels . 12 5 Connections .13 USB connections. 14 Audio connections . 14 Mic . 14 Guitar . 14 Keyboard/drum machine/sound module/ cassette deck/MD/CD etc. (analog connection) . 14 Sound Modules/MDs/CDs, etc. (digital connection) . 14 Monitor speakers . 14 Headphones . 14 6 Application Guide .15

23、 Windows XP and Windows Media Player . 15 Windows Vista and Windows Media Player 15 Mac OS X and iTunes . 16 Cubase LE4. 16 7 Troubleshooting .17 8 Specifications .19 Input/output ratings . 19 Analog audio input/output . 19 Digital audio input/output . 19 Control input/output . 19 Audio performance

24、. 19 Computer requirements . 19 Windows. 19 Macintosh .20 General .20 Dimensional drawings . 21 Block diagram .22 Level diagram .23 TASCAM US-2000 5 Thank you for your purchase of the TASCAM US-2000 USB 2.0 Audio Interface. Before connecting and using the unit, please take time to read this manual t

25、horoughly to ensure you understand how to properly set up and connect the unit, as well as the operation of its many useful and convenient functions. After you have finished reading this manual, please keep it in a safe place for future reference. You can also download the Owners Manual from the TAS

26、CAM web site (). Main features Audio interface with 16 inputs and 4 outputs 24-bit/96-kHz audio 14 balanced analog inputs include 6 XLR for mics, 2 combined XLR/TRS and 6 line S/PDIF digital input +48V phantom power can be provided (to 8 mic inputs) Inputs 1-14 can be monitored individually in mono

27、or in stereo as pairs of channels Outputs include 4 balanced line, a balanced pair for monitors, digital and headphone S/PDIF or AES/EBU selectable digital output 5-dot meter for every input and output Direct monitoring function allows input monitoring without latency In addition to a monitor level

28、control, independent level control is possible for the signals input from a computer by USB and through the units input jacks Input 7 and 8 have insert jacks Can be used with multiple software clients at the same time even if some use ASIO and other use WDM for audio control USB 2.0 High speed (480

29、MHz) compatible Cubase LE4 included A note about computer operation If you are unsure about how to perform basic computer operations appearing in this manual, please refer to the owners manual that came with your computer. 1 Introduction Included items The included items are listed below. Take care

30、when opening the package not to damage the items. Keep the package materials for transportation in the future. Please contact the store where you purchased this unit if any of these items are missing or have been damaged dur- ing transportation. Main unit .1 Power cord .1 USB cable .1 CD-ROM (contai

31、ning driver and manuals) .1 DVD-ROM (Cubase LE4) .1 Cubase LE4 Quick Start Guide .1 A rack-mounting screw kit .1 A warranty card .1 Owners manual (this manual) .1 About this manual In this manual, we use the following conventions: The names of keys and controls are given in the follow- ing typeface:

32、 MONO. Messages on the units display are shown with quotation marks like this: “Message” Additional information is introduced in the styles below when needed: TIP Useful hints when using the unit. NOTE Explanation of actions in special situation and supplement. CAUTION Instructions that should be fo

33、llowed to avoid injury, damage to the unit or other equipment, and loss of data. 6 TASCAM US-2000 Trademarks TASCAM is a registered trademark of TEAC Corporation. Microsoft, Windows, and Windows Vista are either registered trademarks or trademarks of Microsoft Corporation in the United States and/or

34、 other countries. Apple, Macintosh, Mac OS and Mac OS X are trademarks of Apple Inc., registered in the U.S. and other countries. Pentium and Intel are trademarks of Intel Corporation in the U.S. and other countries. AMD Athlon is a trademark of Advanced Micro Devices, Inc. Cubase is a registered tr

35、ademark of Steinberg Media Technologies GmbH. ASIO is a trademark of Steinberg Media Technologies GmbH. Other company names, product names and logos in this document are the trademarks or registered trademarks of their respective owners. Precautions and notes for placement and use The operating temp

36、erature should be between 5C and 35C (41F and 95F). Make sure that the unit is mounted in a level position for correct operation. Do not place any object on the unit for heat dissipation. Avoid installing this unit on top of any heat-generating electrical device such as a power amplifier. Beware of

37、condensation If the unit is moved from a cold to a warm place, or used after a sudden temperature change, there is a danger of condensation; vapor in the air could condense on the internal mechanism, making correct operation impossible. To prevent this, or if this occurs, let the player sit for one

38、or two hours at the new room temperature before using. Cleaning the unit To clean the unit, wipe it gently with a soft dry cloth. Do not wipe with chemical cleaning cloths, benzene, paint thinner, ethyl alcohol or other chemical agents to clean the unit as they could damage the surface. 1 Introducti

39、on TASCAM US-2000 7 2 Names and Functions of Parts NOTE Turn all the way to the left to minimize the input level or all the way to the right to maximize the input level. q MONITOR switches Use these switches to set whether or not adjacent inputs 1-2, 3-4, 5-6, 7-8 are monitored in mono or as stereo

40、pairs with odd-numbered channels (1, 3, 5, 7) on the left and even-numbered channels (2, 4, 6, 8) on the right. w +48V switches Use these switches to set whether or not +48 V phantom power is provided to the mic input jacks in pairs (1-2, 3-4, 5-6, 7-8). CAUTION Before turning these switches ON or OFF, turn the output volume down using the PHONES and MONITOR knobs. Depending on the mic, loud noises might be produced and damage could be caused to equipment and peoples hearing. Do not connect or disconnect a mic with an input when its +48V switch is ON. Turn a switch ON only when connecting