山进PR-D5_MAN-电路原理图.pdf
《山进PR-D5_MAN-电路原理图.pdf》由会员分享,可在线阅读,更多相关《山进PR-D5_MAN-电路原理图.pdf(60页珍藏版)》请在收音机爱好者资料库上搜索。
1、381QD01-A PR-D5 Operating instruction Mode demploi Instruccions de manejo Gebruiksaanwijzing Bedienungsanleitung GB F E NL D AM/FM-RDS Portable Digital Tuning Radio AM/FM-RDS Radio digitale portable AM/FM-RDS Radio Sintonizadora Digital Portatil AM/FM-RDS Draagbare Digitale Radio AM/FM-RDS Tragbares
2、 Digitalradio RadioFans.CN1Important safety instructions 1. Read and understand all safety and operating instructionsbefore the radio is operated. 2. Retain instruction: The safety and operating instructionsshould be retained for future reference. 3. Heed warnings. All warnings on the appliance and
3、operatinginstructions should be followed. 4. Follow all operations and use instructions. 5. Water and moisture: The appliance should not be used nearwater. Do not use near a bathtub, washbowl, laundry tub,kitchen sink, wet basement, swimming pool, etc. 6. Unplug the radio from the AC power outlet be
4、fore cleaning.Use only a damp cloth for cleaning the exterior of the radio. 7. Do not place the radio on an unstable cart, stand, bracket ortable. The radio may fall, causing serious personal injury anddamage to the radio. 8. Ventilation: This radio should be situated so that its locationor position
5、 does not interfere with its proper ventilation.For example, the radio should not be used on a bed, sofa,rug or other soft surfaces that may block the ventilationopenings. It should not be placed in a built-in situationlike a cabinet that may reduce air flow through theventilation openings. 9. Power
6、 sources: The radio should be operated only from thetype of power source indicated on the marking label. If you arenot sure of the type of power supply to your home, consult yourradio dealer or power company. RadioFans.CN2 GB 10. Power cords: The power cord should be positioned so it is notwalked on
7、, pinched, or items placed on top of it. Pay particularattention to cords at plugs, convenience receptacles, and thepoint where they exit from the unit. Unplug the power cord bygripping the power plug, not the cord. Operate the radio usingonly the current type of power source indicated. If you are n
8、otsure of the type of power supply to your home, consult yourdealer or local power company. 11. Do not overload wall outlets or extension cords. This can resultin a risk of fire or electrical shock. Never insert objects of anykind into the radio through opening. The objects may touchdangerous voltag
9、e points or short out parts. This could causea fire or electrical shock. 12. If the radio is left attended and unused for long periods of time,unplug it form the wall outlet. This will prevent damage causedby lightning or power line surges. 13. If the radio is left unattended and unused for a long p
10、eriod oftime, remove the batteries. The batteries may leak and damagefurniture of your radio. 14. Do not attempt to service the receiver yourself. Removing thecover may expose you to dangerous voltage, and will void thewarranty. Refer all servicing to authorized service personnel. 15. Object and Liq
11、uid Entry-Never push objects of any kind into thisradio through opening as they may touch dangerous voltagepoints or short-out parts that could result in a fire or electricshock. Never spill liquid of any kind of product. 16. The appliance should be serviced by qualified service personnelwhen: The p
12、ower supply cord or the plug has been damaged. Objects have fallen or liquid had been spilled into the radio. The radio has been exposed to rain or water. The radio does not appear to operate normally or exhibits a marked change in performance. The radio has been dropped, or the enclosure damaged. A
13、. B. C. D. E. RadioFans.CN3 RadioFans.CN4 GBControlsPower buttonAUX In signalBand and Tuning step selectionAlarm setCT DisplayLCD displayTuning/SET/AUTO SEEK knobVolume ControlPreset buttonsFM Stereo/Mono switchAUX IN socketEarphone socketDC input socketAntennaBattery compartmentLCD DisplayBattery p
14、owerStereo displayRDS displaySleep and snooze statusTime setAlarm displayDigital display 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 A B C D E G F RadioFans.CN5Setting the clock 1. Clock can be set either the radio is power on or off. 2. Press the SET knob (on the side of the radio) for more than2 seconds,
15、display will flash time set symbol and also thehour digits, followed by a beep. 3. Rotate the SET knob to set the required hours. 4. Press the SET knob, the minute digits will flash. 5. Rotate the SET knob to set the required minute. 6. Press the SET knob to complete time setting.Or press POWER.Oper
16、ating the radioTuning the radio 1. Press the Power button to turn on the radio. 2. Select the required waveband by pressing the Band button.There are 3 bands which are FM, AM and AUX-IN. 3. Rotate the Tuning knob to the desired frequency, shown inthe display. 4. Or, press the TUNING button to seek f
17、or the next availablestation. 5. Rotate the Volume knob (on the side of the radio) to get requiredsound level. 6. To turn off the radio, press the Power button. RadioFans.CN6 GBStoring station presets There are 5 memory presets for each waveband STATION PRESETS 1 to 5. 1. Press the Power button to t
18、urn on the radio. 2. Tune to required station using one of the methods previouslydescribed. 3. Press and hold the required preset until the radio beeps.The preset number will appear in the display (such as: )and the station will be stored under chosen preset button. 4. Repeat this procedure for the
19、remaining presets. 5. Stations stored in preset memories can be overwritten byfollowing above procedures.Recalling stations presets 1. Press the Power button to turn on the radio. 2. Select the required waveband. 3. Momentarily press the required Preset button, the presetnumber and station frequency
20、 will appear in the display.RDS function This function only applies when FM station which is listening provides the RDS service. 1. When FM station provides RDS service, shows on thedisplay and the display shows the program type and thenshows the radio text if radio text is provided. 2. Press and ho
21、ld CT button for more than 2 seconds until it beeps,then the radio clock time will be automatically corrected. When itshows “No CT” means there is no service. RadioFans.CN7AUX IN 1. Turn on the radio, and press the STEP/BAND button until “AUX”is displayed. 2. Connect a stereo or mono audio source (i
22、e iPod, MP3 orCD player) to the Aux in socket on the side of the radio.And the AUX-IN light will be on. 3. Adjust the Volume control on your iPod, MP3 or CD player.Setting the radio alarm 1. To activate the alarm, press and hold the ALARM button formore than 2 seconds and it will beep and the displa
23、y willshow “ALARM”. 2. To deactivate the alarm, press and hold the ALARM button formore than 2 seconds and it will beep and the “ALARM” willdisappear from the display. When the radio alarm is selected, the radio will turn on and play the last played radio station at the chosen alarm time. (If it is
- 配套讲稿:
如PPT文件的首页显示word图标,表示该PPT已包含配套word讲稿。双击word图标可打开word文档。
- 特殊限制:
部分文档作品中含有的国旗、国徽等图片,仅作为作品整体效果示例展示,禁止商用。设计者仅对作品中独创性部分享有著作权。
- 关 键 词:
- 山进 PR D5_MAN 电路 原理图
收音机爱好者资料库所有资源均是用户自行上传分享,仅供网友学习交流,未经上传用户书面授权,请勿作他用。



Marshall-9100-62-02-Schematic电路原理图.pdf


