Yamaha-AW-2816-Service-Manual电路原理图.pdf
《Yamaha-AW-2816-Service-Manual电路原理图.pdf》由会员分享,可在线阅读,更多相关《Yamaha-AW-2816-Service-Manual电路原理图.pdf(120页珍藏版)》请在收音机爱好者资料库上搜索。
1、AW2816 1 SERVICE MANUAL PA 011573 1.386K-3012 Printed in Japan 01.08 HAMAMATSU, JAPAN CONTENTS DIMENSIONS. 3 SPECIFICATIONS.4/8 PANEL LAYOUT. 12 CIRCUIT BOARD LAYOUT. 18 BLOCK DIAGRAM. 20 DISASSEMBLY PROCEDURE. 25 INSTALLING AN INTERNAL HARD DISK . 29 INSTALLING A CD-RW DRIVE . 32 INSTALLING I/O CAR
2、D. 36 LSI PIN DESCRIPTION. 37 IC BLOCK DIAGRAM. 47 CIRCUIT BOARDS. 50 TEST PROGRAM.62/70 DISPLAY MESSAGE LIST .78/82 MIDI IMPLEMENTATION CHART . 86 PARTS LIST OVERALL CIRCUIT DIAGRAM SOFTWARE BLOCK DIAGRAM WIRING This document is printed on chlorine free (ECF) paper with soy ink. PROFESSIONAL AUDIO
3、WORKSTATION RadioFans.CN 收音机爱 好者资料库 AW2816 2 IMPOR TANT NOTICE FOR THE UNITED KINGDOM Connecting the Plug and CoConnecting the Plug and CoConnecting the Plug and CoConnecting the Plug and CoConnecting the Plug and Cor r r r rd d d d d IMPORTANT.The wires in this main lead are coloured in accordance
4、with the following code: BLUE:NEUTRAL BROWN: LIVE As the colours of the wires in the main lead of this apparatus may not correspond with the coloured markings identifying the terminals in your plug, proceed as follows: The BLUE wire must be connected to the terminal that is marked with the letter N
5、(or coloured BLACK). The BROWN wire must be connected to the terminal that is marked with the letter L (or coloured RED). Be certain that neither core is connected to the earth terminal of the three pin plug. IMPOR TANT NOTICE This manual has been provided for the use of authorized Yamaha Retailers
6、and their service personnel. It has been assumed that basic service procedures inherent to the industry, and more specifically Yamaha Products, are already known and under- stood by the users, and have therefore not been restated. WARNING :Failure to follow appropriate service and safety procedures
7、when servicing this product may result in per- sonal injury, destruction of expensive components and failure of the product to perform as specified. For these reasons, we advise all Yamaha product owners that all service required should be performed by an authorized Yamaha Retailer or the appointed
8、service representative. IMPORTANT :This presentation or sale of this manual to any individual or firm does not constitute authorization certifi- cation, recognition of any applicable technical capabilities, or establish a principal-agent relationship of any form. The data provided is belived to be a
9、ccurate and applicable to the unit(s) indicated on the cover. The research engineering, and service departments of Yamaha are continually striving to improve Yamaha products. Modifications are, therefore, inevitable and changes in specification are subject to change without notice or obligation to r
10、etrofit. Should any discrepancy appear to exist, please contact the distributors Service Division. WARNING :Static discharges can destroy expensive components. Discharge any static electricity your body may have accumulated by grounding yourself to the ground bus in the unit (heavy gauge black wires
11、 connect to this bus.) IMPORTANT :Turn the unit OFF during disassembly and parts replacement. Recheck all work before you apply power to the unit. WARNING: CHEMICAL CONTENT NOTICE! The solder used in the production of this product contains LEAD. In addition, other electrical/electronic and/or plasti
12、c (Where applicable) components may also contain traces of chemicals found by the California Health and Welfare Agency (and possibly other entities) to cause cancer and/or birth defects or other reproductive harm. DO NOT PLACE SOLDER, ELECTRICAL/ELECTRONIC OR PLASTIC COMPONENTS IN YOUR MOUTH FOR ANY
13、 REASON WHAT SO EVER! Avoid prolonged, unprotected contact between solder and your skin! When soldering, do not inhale solder fumes or expose eyes to solder/flux vapor! If you come in contact with solder or components located inside the enclosure of this product, wash your hands before handling food
14、. WARNING Components having special characteristics are marked and must be replaced with parts having specification equal to those originally installed. RadioFans.CN 收音机爱 好者资料库 AW2816 3 LITHIUM BA TTERY HANDLING This product uses a lithium battery for memory back-up. WARNING :Lithium batteries are d
15、angerous because they can be exploded by improper handling. Observe the following pre- cautions when handling or replacing lithium batteries. Leave lithium battery replacement to qualified service personnel. Always replace with batteries of the same type. When installing on the PC board by soldering
16、, solder using the connection terminals provided on the battery cells. Never solder directly to the cells. Perform the soldering as quickly as possible. Never reverse the battery polarities when installing. Do not short the batteries. Do not attempt to recharge these batteries. Do not disasemble the
17、 batteries. Never heat batteries or throw them into fire. ADVARSEL! Lithiumbatteri-Eksplosionsfare ved fejlagtig handtering. Udskiftning ma kun ske med batteri af samme fabrikat og type. lever det brugte batteri tilbage til leverandren. VARNING Explosionsfara vid felaktigt batteribyte. Anvand samma
18、batterityp eller en ekvivalent typ som rekommenderas av apparattillverkaren. Kassera anvant batteri enligt fabrikantens instruktion. VAROITUS Paristo voi rajahtaa, jos se on virheellisesti asennettu. Vaihda paristo ainoastaan laitevalmistajan suosittelemaan tyyppiiin. Havita kaytetty paristo valmist
19、ajan ohjeiden mukaisesti. The following information complies with Dutch official Gazette 1995. 45; ESSENTIALS OF ORDER ON THE COLLECTION OF BATTERIES. Please refer to the diassembly procedure for the removal of Back-up Battery. Leest u voor het verwijderen van de backup batterij deze beschrijving. I
20、C with internal lithium battery (DS12887)REAL TIME CLOCK Part No.XV618A00 MAIN Circuit Board IC608 DIMENSIONS 480 428.9 141 7.6 Units: mm AW2816 4 SPECIFICATIONS General Specifi cations Frequency Response0 +1/-3 dB (MIC/LINE IN - STEREO OUT) 20 Hz20 kHz (Nominal input/Output level) 20 kHz LPF Dynami
21、c range109 dB typ. 103 dB min. 104 dB typ. 98 dB min. DA converter (STEREO OUT) DA converter (STEREO OUT) AD + DA (LINE IN to STEREO OUT) AD + DA (LINE IN to STEREO OUT) (Maximum level to Noise level) 20 kHz LPF, IHF-A AD converter24-bit linear, 64-times oversampling DA converter24-bit linear, 128-t
22、imes oversampling Internal processing32-bit Sampling frequencyInternal 44.1 kHz ( 6%)/48 kHz ( 6%) External 44.1 kHz (-6%) to 48 kHz (+6%) Audio input sectionmax. 18 channels 8 channels 2 channels (stereo 1) max. 8 channels MIC/LINE DIGITAL STEREO IN mini YGDAI card (option) Audio output sectionmax.
23、 20 channels 2 channels (stereo 1) 4 channels 2 channels (stereo 1) 2 channels (stereo 1) 2 channels (stereo 1) max. 8 channels STEREO OUT OMNI OUT MONITOR OUT PHONES DIGITAL STEREO OUT mini YGDAI card (option) Mixing layer section28 channels 8 channels 4 channels (stereo 2) 16 channels (16 track di
24、rect out playback), or stereo 2 channels (stereo track playback) Input channel Internal effect return Playback Internal effects section Multi-effects 2 Bus section18 channels 8 channels 6 channels 2 channels (stereo 1) 2 channels (stereo 1) Bus Aux Stereo Solo Less than 0.02% 1 kHz (LINE IN to STERE
- 配套讲稿:
如PPT文件的首页显示word图标,表示该PPT已包含配套word讲稿。双击word图标可打开word文档。
- 特殊限制:
部分文档作品中含有的国旗、国徽等图片,仅作为作品整体效果示例展示,禁止商用。设计者仅对作品中独创性部分享有著作权。
- 关 键 词:
- Yamaha AW 2816 Service Manual 电路 原理图