Onkyo - Rs232Dvs939 E 电路图.pdf

《Onkyo - Rs232Dvs939 E 电路图.pdf》由会员分享，可在线阅读，更多相关《Onkyo - Rs232Dvs939 E 电路图.pdf（22页珍藏版）》请在收音机爱好者资料库上搜索。

1、ONKYO RS232 CONTROL SYSTEM For DV-S939/DPS-9.1/RDV-1 Version 1.00 Updated Sep 27, 2000 1 / 22 RadioFans.CN 收音机爱 好者资料库 1.Control Interface Overview 1.1.HARDWARE OVERVIEW ? 3 wire RS-232C protocol ? 9 pin female D type connector pin 2 = transmit, pin 3 = receive, pin 5 = signal ground ? Communication

2、Parameters 9600 baudno parity 8 data bitsno xon/xoff 1 stop bit 1.2.MESSAGE OVERVIEW Receive Message Format Send Message Format 1st2nd3rd-5th6th-last !2?STSTEOF Note : Receive Time Interval : more than 50msec Send Message Format 1st2nd3rd-5th6th-last !2PWR00EOF Special Character CRCarridge ReturnAsc

3、ii Code 0 x0D LFLine FeedAscii Code 0 x0A EOFEnd Of FileAscii Code 0 x1A Start Character Send to DVD Player Character Command Characters Parameter Characters End Character Start Character Send to DVD Player Character Command Characters Parameter Characters End Character 2 / 22 RadioFans.CN 收音机爱 好者资料

4、库 1.3.COMMAND SET SUMMARY Power CommandPWR 5P Open/Close CommandOPC 5P OSD Cursor CommandOSD 5P Enter CommandENT 5P Return CommandRET 5P Setup CommandSUP 6P Menu On CommandMNU 6P Top Menu On CommandTMN 6P Quick CommandQCK 6P V.Remote CommandVRM 6P Display/Navi CommandDSP 6P Angle CommandANG 6P Audio

5、 CommandAUD 6P Subtitle Change CommandSUB 6P Subtitle On/Off CommandSUO 6P Play CommandPLY 7P Stop CommandSTP 7P Pause CommandPAS 7P Skip CommandSKP 7P Scan CommandSCN 7P Slow CommandSLW 7P Still CommandSTL 7P Numeric CommandNUM 8P Search CommandSRC 8P Repeat CommandRPT 8P A-B Repeat CommandABR 8P M

6、emory CommandMEM 8P Random CommandRND 8P Clear CommandCLR 8P Dimmer Level CommandDIM 9P Zoom CommandZOM 9P Video Out CommandVOT 9P Progressive CommandPGR 9P 3D DNR CommandDNR 9P Question Status?ST 10P Status Mode Set ComandPMS 11P 3 / 22 RadioFans.CN 收音机爱 好者资料库 2.Communication Flow Description You c

7、an perform the following 3 types of communications. Question Status Question Message !2?STSTCR State Message !2SST00EOF Command Communication Command Message !2PWR00CR ?State Message !2SST00EOF Event Notice Communication Command Message !2PMS01CR State Message !2PMS01EOF State Message !?SST00EOF You

8、r Controller DVS-939 DPS-9.1 RDV-1 DVS-939 DPS-9.1 RDV-1 Your Controller DVS-939 DPS-9.1 RDV-1 Your Controller To know the current status of the DVD player using an external controller, send a message that is the command “?ST” followed by a parameter. The DVD player will then return a message that c

9、omprises the command followed by the current status. To change the status of the DVD player using an external controller, send a message comprising a command followed by either a direct status notification parameter or a status change direction parameter such as “UP” or “DOWN.” By default, no status

10、 notification is made when the status of the DVD player is changed. * However, status notification will be made if the DVD player is set to send the new status whenever the status is changed by a direct pushbutton or remote control operation. By sending “!2PMS01,” you can set the DVD player so that

11、the after-change status is notified whenever the status is changed directly by a pushbutton or remote control operation. Send “!2PMS00” to exit the event notice communication mode. The DVD player will no longer notify you of the status if the main power switch is turned off. DVS-939 DPS-9.1 RDV-1 Yo

12、ur Controller 4 / 22 3.Command Descriptions Power Command PWR The command for controlling the system power. The following parameters are used to turn on and off the system power. Parameter List (Characters/Means) : 00System StandBy 01System On Open/Close Command OPC The command for opening/closing t

13、he disc tray. This has the same function as that of the OPEN/CLOSE key on the DVD player or the remote controller. OSD Cursor Command OSD The command for controlling the OSD cursors. The following parameters are used in the same way as the cursor keys provided on the remote controller. Parameter Lis

14、t (Characters/Means) : UPup DNdown RHright LFleft ULup left URup right DLdown left DNdown right Enter Command ENT A command for controlling the DVD player. This has the same function as that of the ENTER key on the remote controller. Return Command RET A command for controlling the DVD player. This

15、has the same function as that of the RETURN key on the remote controller. Setup Command SUP 5 / 22 A command for controlling the DVD player. This has the same function as that of the SETUP key on the remote controller. Menu On Command MNU A command for controlling the DVD player. This has the same f

16、unction as that of the MENU key on the remote controller. Top Menu On Command TMN A command for controlling the DVD player. This has the same function as that of the TOP MENU key on the remote controller. Quick Command QCK A command for controlling the DVD player. This has the same function as that

17、of the QUICK key on the remote controller. V.Remote Command VRM A command for controlling the DVD player. This has the same function as that of the V.REMOTE key on the remote controller. Display/Navi Command DSP A command for controlling the DVD player. This has the same function as that of the DISP

18、LAY/NAVI key on the DVD player or the remote controller. Angle Command ANG A command for controlling the DVD player. This has the same function as that of the ANGLE key on the remote controller. Audio Command AUD A command for controlling the DVD player. This has the same function as that of the AUD

19、IO key on the remote controller. Subtitle Change Command SUB A command for controlling the subtitle displayed on the DVD player. This has the same function as that of the SUBTTL key on the remote controller. Subtitle On/Off Command SUO A command for controlling the subtitle displayed on the DVD play

20、er. This is used to turn on and off the subtitle. 6 / 22 Play Command PLY A command for controlling the DVD player. The following parameters are used in the same way as the PLAY key provided on the DVD player or the remote controller. Parameter List (Characters/Means) : UPfwd DNrev Stop Command STP

21、A command for controlling the DVD player. This has the same function as that of the STOP key on the DVD player or the remote controller. Pause Command PAS A command for controlling the DVD player. This has the same function as that of the PAUSE/STEP key on the remote controller. Skip Command SKP A c

22、ommand for controlling the DVD player. The following parameters are used in the same way as the | (up) keys provided on the DVD player or the remote controller. Parameter List (Characters/Means) : UPup DNdown Scan Command SCN A command for controlling the DVD player. The following parameters are use

23、d in the same way as the (ff) keys provided on the remote controller. Parameter List (Characters/Means) : UPff DNfr Slow Command SLW A command for controlling the DVD player. The following parameters are used in the same way as the SLOW key provided on the remote controller. Parameter List (Characte

24、rs/Means) : UPfw DNbw Still Command STL A command for controlling the DVD player. The following parameters are used in the same way as the STILL key provided on the remote controller. Parameter List (Characters/Means) : UP+ DN- 7 / 22 Numeric Command NUM A command for controlling the DVD player. The

25、 following parameters are used in the same way as the number keys provided on the remote controller. Parameter List (Characters/Means) : 011 022 033 044 055 066 077 088 099 000 10+10 Search Command SRC A command for controlling the DVD player. This has the same function as that of the SEARCH key on

26、the remote controller. Repeat Command RPT A command for controlling the DVD player. This has the same function as that of the REPEAT key on the remote controller. A-B Repeat Command ABR A command for controlling the DVD player. This has the same function as that of the A-B key on the remote controll

27、er. Memory Command MEM A command for controlling the DVD player. This has the same function as that of the MEMORY key on the remote controller. Random Command RND A command for controlling the DVD player. This has the same function as that of the RANDOM key on the remote controller. Clear Command CL

28、R A command for controlling the DVD player. This has the same function as that of the CLEAR key on the remote controller. 8 / 22 Dimmer Level Command DIM A command for controlling the DVD player. The following parameters are used to change the display dimmer level. Parameter List (Characters/Means)

29、: 00bright 01middle 02dark 03off DNdim toggle down Zoom Command ZOM A command for controlling the DVD player. The following parameters are used in the same way as the ZOOM key. Parameter List (Characters/Means) : UP+ DN- TUON/OFF Video Out Command VOT A command for controlling the DVD player. The fo

30、llowing parameters are used to control the video output mode. Parameter List (Characters/Means) : ONvideo on OFvideo off TGtoggle Progressive Command PGR A command for controlling the DVD player. This has the same function as that of the PROGRESSIVE key on the remote controller. 3D DNR Command DNR A

31、 command for controlling the DVD player. This has the same function as that of the DNR key on the remote controller. 9 / 22 4.Status Request Command Descriptions Status Request Command ?ST The command for requesting the status of the DVD player. The following parameters are used to request various s

32、tatuses of the DVD player. Parameter List (Characters/Means) : STAction Status DSDisc Status MSDimmer Status VSVideo Status FSSampling Rate Status Reply Action Status SST The reply to the Action Status Request Command “?STST.” The following parameters are used in the reply to indicate the action sta

33、tus of the DVD player. Parameter List (Characters/Means) : 00standby 01play 02pause 03stop FFunkown/other DIDigital in operating(RDV-1 status only) Reply Disc Status DST The reply to the Disc Status Request Command “?STDS.” The following parameters are used in the reply to indicate the disc status o

34、f the DVD player. Parameter List (Characters/Means) : 00no disc 01dvd 02dvd-audio 03vcd 04cd 05svcd FFunkown/other Reply Dimmer Status MST The reply to the Dimmer Status Request Command “?STMS.” The following parameters are used in the reply to indicate the display dimmer status of the DVD player. P

35、arameter List (Characters/Means) : 00dimmer bright 01dimmer middle 02dimmer dark 03dimmer off FFunkown/other 10 / 22 Reply fs Status FST The reply to the Sampling Rate Status Request Command “?STFS.” The following parameters are used in the reply to indicate the sampling rate status of the DVD playe

36、r. Parameter List (Characters/Means) : 00fs 32kHz 01fs 44.1kHz 02fs 48kHz 03fs 88.2kHz 04fs 96kHz 05fs 176.4kHz 06fs 192kHz 07unlock FFunkown/other 5.Status Mode Set Comand Descriptions Status Mode Set Comand PMS The command for setting the status output mode of the DVD player. The following paramet

37、ers are used to set the status output mode. Parameter List (Characters/Means) : 00Status output is made only when a Status Request Command “?ST” is received. 01Status output is made whenever the status is changed. 11 / 22 ONKYO RS232 CONTROL SYSTEM 12 / 22 13 / 22 14 / 22 To know the current status

38、of the DVD player using an external controller, send a message comprising a command followed by either a direct status notification parameter or a status * However, status notification will be made if the DVD player is set to send the new status By sending “!2PMS01,” you can set the DVD player so th

39、at the after-change status is notified The DVD player will no longer notify you of the status if the main power switch is turned off. 15 / 22 This has the same function as that of the OPEN/CLOSE key on the DVD player or the remote controller. The following parameters are used in the same way as the

40、cursor keys provided on the remote controller. 16 / 22 This has the same function as that of the DISPLAY/NAVI key on the DVD player or the remote controller. 17 / 22 The following parameters are used in the same way as the PLAY key provided on the DVD player or the remote controller. This has the sa

41、me function as that of the STOP key on the DVD player or the remote controller. The following parameters are used in the same way as the | (up) keys provided on the DVD player or the remote controller. The following parameters are used in the same way as the (ff) keys provided on the remote controll

42、er. The following parameters are used in the same way as the SLOW key provided on the remote controller. The following parameters are used in the same way as the STILL key provided on the remote controller. 18 / 22 The following parameters are used in the same way as the number keys provided on the

43、remote controller. 19 / 22 20 / 22 The following parameters are used in the reply to indicate the action status of the DVD player. The following parameters are used in the reply to indicate the display dimmer status of the DVD player. 21 / 22 The following parameters are used in the reply to indicate the sampling rate status of the DVD player. Status output is made only when a Status Request Command “?ST” is received. 22 / 22