Sony Dscw5 电路图.pdf

《Sony Dscw5 电路图.pdf》由会员分享，可在线阅读，更多相关《Sony Dscw5 电路图.pdf（47页珍藏版）》请在收音机爱好者资料库上搜索。

1、SERVICE MANUAL LEVEL 2 Link SERVICE NOTE DISASSEMBLY BLOCK DIAGRAMS FRAME SCHEMATIC DIAGRAM SCHEMATIC DIAGRAMS PRINTED WIRING BOARDS REPAIR PARTS LIST SPECIFICATIONS SERVICE NOTE DISASSEMBLY BLOCK DIAGRAMS FRAME SCHEMATIC DIAGRAM SCHEMATIC DIAGRAMS PRINTED WIRING BOARDS REPAIR PARTS LIST SPECIFICATI

2、ONS Link Revision HistoryRevision History How to use Acrobat Reader How to use Acrobat Reader Sony EMCS Co. DSC-W5/W7/W15/W17 For ADJUSTMENTS (SECTION 6), refer to SERVICE MANUAL, ADJ (9-876-856-51). For INSTRUCTION MANUAL, refer to SERVICE MANUAL, LEVEL 1 (9-876-856-41). This service manual contain

3、s information for Japanese model as well. Reference No. search on printed wiring boards is available. Table for Differences of Function of Each Model Note in Lens Frame Installation Method for Copying or Erasing the Data in Internal Memory. Exchange Method of Barrier Assy Ver 1.3 2005.12 DIGITAL STI

4、LL CAMERA On the CH-168 and SY-001 boards This service manual procides the information that is premised the circuit board replacement service and not intended repair inside the CH-168 and SY-001 boards. Therefore, schematic diagram, printed wiring board and electrical parts list of the CH-168 and SY

5、-001 boards are not shown. The following pages are not shown. Schematic diagrams. Pages 4-11 to 4-30 Printed wiring boards . Pages 4-39 to 4-42 Waveforms . Pages 4-45 and 4-46 Mounted parts location. Pages 4-48 Electrical parts list . Pages 5-7 and 5-9 to 5-12 The above-described information is show

6、n in service manual Level 3. DSC-W5/W7/W15/W17 2005L0500-1 2005.12 Published by DI Technical Support Department9-876-856-31 Photo: DSC-W5/Silver DSC-W5/W7 US Model Canadian Model Argentine Model Brazilian Model Japanese Model DSC-W5/W7/W15/W17 AEP Model UK Model E Model Australian Model Hong Kong Mo

7、del Korea Model Tourist Model DSC-W5/W7/W15 Chinese Model RadioFans.CN 收音机爱 好者资料库 2 DSC-W5/W7/W15/W17 SPECIFICATIONS Camera System Image deviceDSC-W7/W17: 9.11 mm (1/1.8 type) color CCD, Primary color filter DSC-W5/W15: 9.04 mm (1/1.8 type) color CCD, Primary color filter Total pixel number of camer

8、a DSC-W7/W17: Approx. 7 410 000 pixels DSC-W5/W15: Approx. 5 255 000 pixels Effective pixel number of camera DSC-W7/W17: Approx. 7 201 000 pixels DSC-W5/W15: Approx. 5 090 000 pixels LensCarl Zeiss Vario-Tessar 3 zoom lens f = 7.9 - 23.7 mm (38 - 114 mm when converted to a 35 mm still camera) F2.8 -

9、 5.2 Exposure control Automatic exposure, Manual exposure, Scene Selection (7 modes) White balanceAutomatic, Daylight, Cloudy, Fluorescent, Incandescent, Flash File format (DCF compliant) Still images: Exif Ver. 2.2 JPEG compliant, DPOF compatible Movies: MPEG1 compliant (Monaural) Recording media I

10、nternal memory 32 MB Memor y Stick FlashRecommended distance (ISO set to Auto): 0.2 m to 4.5 m (7 7/8 inches to 14 feet 9 1/4 inches) (W)/0.3 m to 2.5 m (11 7/8 inches to 8 feet 2 1/2 inches) (T) Input and Output connectors A/V OUT (MONO) jack (Monaural) Minijack Video: 1 Vp-p, 75 , unbalanced, sync

11、 negative Audio: 327 mV (at a 47 k load) Output impedance 2.2 k USB jackmini-B USB communication Hi-Speed USB (USB 2.0 compliant) LCD screen LCD panel6.2 cm (2.5 type) TFT drive Total number of dots 115 200 (480240) dots Power, general PowerHR 15/51:HR6 (size AA) Nickel-Metal Hydride batteries (2),

12、2.4 V R6 (size AA) Alkaline batteries (2, not supplied), 3 V AC-LS5K AC Acaptor (not supplied), 4.2 V Power consumption (during shooting with the LCD screen on) DSC-W7/W17: 1.2 W DSC-W5/W15: 1.1 W Operating temperature 0C to +40C (+32F to +104F) Storage temperature 20C to +60C (4F to +140F) Dimensio

13、ns916037.1 mm (3 5/82 3/81 1/2 inches) (W/H/D, excluding maximum protrusions) MassApprox. 253 g (8.9 oz) (including two batterries and wrist strap) MicrophoneElectret condenser microphone SpeakerDynamic speaker Exif PrintCompatible PRINT Image Matching III Compatible PictBridgeCompatible BC-CS2A/CS2

14、B Ni-MH battery charger Power requirements AC 100 to 240 V, 50/60 Hz, 3 W Output voltageAA: DC 1.4V 400 mA 2 AAA: DC 1.4 V 160 mA 2 Operating temperature 0C to +40C (+32F to +104F) Storage temperature 20C to +60C (4F to +140F) DimensionsApprox. 713091 mm (2 7/81 3/163 5/8 inches) (W/H/D) MassApprox.

15、 90 g (3 oz) Design and specifications are subject to change without notice. RadioFans.CN 收音机爱 好者资料库 3 DSC-W5/W7/W15/W17 SAFETY-RELATED COMPONENT WARNING! COMPONENTS IDENTIFIED BY MARK 0 OR DOTTED LINE WITH MARK 0 ON THE SCHEMATIC DIAGRAMS AND IN THE PARTS LIST ARE CRITICAL TO SAFE OPERATION. REPLAC

16、E THESE COMPONENTS WITH SONY PARTS WHOSE PART NUMBERS APPEAR AS SHOWN IN THIS MANUAL OR IN SUPPLEMENTS PUBLISHED BY SONY. ATTENTION AU COMPOSANT AYANT RAPPORT LA SCURIT! LES COMPOSANTS IDENTIFS PAR UNE MARQUE 0 SUR LES DIAGRAMMES SCHMATIQUES ET LA LISTE DES PICES SONT CRITIQUES POUR LA SCURIT DE FON

17、CTIONNEMENT. NE REMPLACER CES COMPOSANTS QUE PAR DES PISES SONY DONT LES NUMROS SONT DONNS DANS CE MANUEL OU DANS LES SUPPMENTS PUBLIS PAR SONY. 1.Check the area of your repair for unsoldered or poorly-soldered connections. Check the entire board surface for solder splashes and bridges. 2.Check the

18、interboard wiring to ensure that no wires are pinched or contact high-wattage resistors. 3.Look for unauthorized replacement parts, particularly transistors, that were installed during a previous repair. Point them out to the customer and recommend their replacement. 4.Look for parts which, through

19、functioning, show obvious signs of deterioration. Point them out to the customer and recommend their replacement. 5.Check the B+ voltage to see it is at the values specified. 6.FLEXIBLE Circuit Board Repairing Keep the temperature of the soldering iron around 270C during repairing. Do not touch the

20、soldering iron on the same conductor of the circuit board (within 3 times). Be careful not to apply force on the conductor when soldering or unsoldering. Unleaded solder Boards requiring use of unleaded solder are printed with the lead- free mark (LF) indicating the solder contains no lead. (Caution

21、: Some printed circuit boards may not come printed with the lead free mark due to their particular size.) : LEAD FREE MARK Unleaded solder has the following characteristics. Unleaded solder melts at a temperature about 40C higher than ordinary solder. Ordinary soldering irons can be used but the iro

22、n tip has to be applied to the solder joint for a slightly longer time. Soldering irons using a temperature regulator should be set to about 350C. Caution: The printed pattern (copper foil) may peel away if the heated tip is applied for too long, so be careful! Strong viscosity Unleaded solder is mo

23、re viscous (sticky, less prone to flow) than ordinary solder so use caution not to let solder bridges occur such as on IC pins, etc. Usable with ordinary solder It is best to use only unleaded solder but unleaded solder may also be added to ordinary solder. SAFETY CHECK-OUT After correcting the orig

24、inal service problem, perform the following safety checks before releasing the set to the customer. CAUTION Danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent type. Table for differences of function ModelDSC-W5DSC-W7DSC-W15DSC-W17 US, CND, AEP, UK,US, CN

25、D, AEP, UK,AEP, UK,AEP, UK DestinationE, AUS, HK, CH,E, AUS, HK, CH,E, AUS, HK, CH,E, AUS, HK, KR, AR, BR, J, JEKR, AR, BR, J, JEKR, JEKR, JE CCD imager5 255 000 pixels7 410 000 pixels5 255 000 pixels7 410 000 pixels Total pixel (Effective pixel)(5 090 000 pixels)(7 201 000pixels)(5 090 000 pixels)(

26、7 201 000pixels) CD boardCD-545CD-546CD-545CD-546 Abbreviation AR: Argentine model AUS : Australian model BR: Brazilian model CH: Chinese model CND: Canadian model HK: Hong Kong model J: Japanese model JE: Tourist model KR: Korea model Note:DSC-W15/W17 are the same as DSC-W5/W7 except accessories an

27、d packing materials. RadioFans.CN 收音机爱 好者资料库 4 DSC-W5/W7/W15/W17 TABLE OF CONTENTS 1.SERVICE NOTE 1-1.Note for Repair 1-1 1-2.Discharging of The SY-001 Boards Charging Capacitor (C901)1-1 1-3.Note in Lens Frame Installation 1-2 1-4.Description on Self-diagnosis Display 1-2 1-5.Method for Copying or

28、Erasing the Data in Internal Memory 1-3 1-6.Process After Fixing Flash Error 1-4 2.DISASSEMBLY 2-1.Disassembly2-1 2-2.SY-001 Board Service Position 2-3 2-3.Exchange Method of Barrier Assy 2-5 2-3-1.Peel Off Old Ornamental Ring A 2-5 2-3-2.Remove Old Barrier Assy2-6 2-3-3.Install New Barrier Assy 2-6

29、 2-3-4.Adhere the Ornamental Ring A 2-7 2-4.Circuit Boards Location 2-8 3.BLOCK DIAGRAMS 3-1.Overall Block Diagram (1/2)3-1 3-2.Overall Block Diagram (2/2)3-3 3-3.Power Block Diagram 3-5 4.PRINTED WIRING BOARDS AND SCHEMATIC DIAGRAMS 4-1.Frame Schematic Diagram 4-1 4-2.Schematic Diagrams4-5 CD-545 F

30、LEXIBLE (CCD IMAGER) 4-7 CD-545 FLEXIBLE (CCD IMAGER) 4-9 SW-001 BOARD (CONTROL SWITCH)4-31 CONTROL SWITCH BLCOK4-32 4-3.Printed Wiring Boards 4-35 CD-545 FLEXIBLE4-37 CD-546 FLEXIBLE4-38 SW-001 4-44 4-5.Mounted Parts Location 4-47 5.REPAIR PARTS LIST 5-1.Exploded Views 5-2 5-1-1.Overall Assembly 5-

31、2 5-1-2.Cabinet (Front) Block5-3 5-1-3.Main Block Assembly 5-4 5-1-4.Lens Block Assembly5-5 5-2.Electrical Parts List 5-6 SectionTitlePageSectionTitlePage 1-1 DSC-W5/W7/W15/W17 1-2. DISCHARGING OF THE SY-001 BOARDS CHARGING CAPACITOR (C901) The charging capacitor (C901) of SY-001 board is charged up

32、 to the maximum 300 V potential. There is a danger of electric shock by this high voltage when the capacitor is handled by hand. The electric shock is caused by the charged voltage which is kept without discharging when the main power of the unit is simply turned off. Therefore, the remaining voltag

33、e must be discharged as described below. Preparing the Short Jig To preparing the short jig, a small clip is attached to each end of a resistor of 1 k /1 W (1-215-869-11). Wrap insulating tape fully around the leads of the resistor to prevent electrical shock. 1 k/1 W Wrap insulating tape. Dischargi

34、ng the Capacitor Short-circuit between the positive and the negative terminals of charged capacitor with the short jig about 10 seconds. 1-1. NOTE FOR REPAIR Make sure that the flat cable and flexible board are not cracked of bent at the terminal. Do not insert the cable insufficiently nor crookedly

35、. Cut and remove the part of gilt which comes off at the point. (Be careful or some pieces of gilt may be left inside) When remove a connector, dont pull at wire of connector. It is possible that a wire is snapped. When installing a connector, dont press down at wire of connector. It is possible tha

36、t a wire is snapped. 1. SERVICE NOTE R:1 k/1 W (Part code: 1-215-869-11) 1-2 DSC-W5/W7/W15/W17 1-3. NOTE IN LENS FRAME INSTALLATION When tightening a screw, have both sides of the lens block assembly so as not for the load to depend. P2 tapping screw Lens block assembly Lens frame assembly Self-diag

37、nosis display C: ss: ss You can reverse the camera malfunction yourself. (However, contact your Sony dealer or local authorized Sony service facility when you cannot recover from the camera malfunction.) E: ss: ss Contact your Sony dealer or local authorized Sony service facility. Display Code C:32:

38、ss C:13:ss Countermeasure Turn the power off and on again. Format the “Memory Stick” or internal memory. Cause Trouble with hardware. “Memory Stick” or internal memory is unformatted. Caution Display During Error SYSTEM ERROR FORMAT ERROR MEMORY STICK ERROR E:61:ss E:91:ss E:92:ss 1-4. DESCRIPTION O

39、N SELF-DIAGNOSIS DISPLAY Insert a new “Memory Stick”.“Memory Stick” is broken. Turn the power off and on again.Trouble with internal memory.INTERNAL MEMORY ERROR Checking of lens drive circuit. When failed in the focus and zoom initialization. Checking of flash unit or replacement of flash unit. (No

40、te) Insert batteries correctly. Abnormality when flash is being charged. Batteries are not inserted correctly. Note: After repair, be sure to perfom “1-6. PROCESS AFTER FIXING FLASH ERROR”. 1-3 DSC-W5/W7/W15/W17 1-5. METHOD FOR COPYING OR ERASING THE DATA IN INTERNAL MEMORY The data can be copied/er

41、ased by the operations on the Setup screen. (When erasing the data, execute formatting the internal memory.) Note: 1 When replacing the SY-001 board, erase the data in internal memory of the board before replacement. Note: 2 When replacing the SY-001 board or the IC381 on the SY-001 board, execute f

42、ormatting and initialize the internal memory after replacement. Method for Copying the Data in Internal Memory Method for Formatting the Internal Memory Copies all images in the internal memory to a “Memory Stick”. 1 Insert a “Memory Stick” having 32 MB or larger capacity. 2 Select OK with v on the

43、control button, then press z. The message “All data in internal memory will be copied Ready?” appears. 3 Select OK with v, then z. Copying starts. Use fully charged Nickel-Metal Hydride batteries or the AC Adaptor (not supplied). If you attempt to copy image files using batteries with little remaini

44、ng charge, the batteries may run out, causing copying to fail or possibly corrupting the data. You cannot copy individual images. The original images in the internal memory are retained even after copying. To delete the contents of the internal memory, remove the “Memory Stick” after copying, then e

45、xecute the Format command in Internal Memory Tool). You cannot select a folder copied on a “Memory Stick”. A(Print order) mark added to an image is deleted when you copy data. Copy OKSee the following procedure. CancelCancels the copying. Copying 102_COPY Formats the internal memory. Note that forma

46、tting irrevocably erases all data in the internal memory, including even protected images. 1 Select OK with v on the control button, then press z. The message “All data in internal memory will be erased Ready?” appears. 2 Select OK with v, then press z. The format is complete. Format OKSee the follo

47、wing procedure. CancelCancels the formatting. 1-4E DSC-W5/W7/W15/W17 1-6. PROCESS AFTER FIXING FLASH ERROR When “FLASH error” (Self-diagnosis Code E : 91 : * ) occurs, to prevent any abnormal situation caused by high voltage, setting of the flash is changed automatically to disabling charge and flas

48、h setting. After fixing, this setting needs to be deactivated. Flash error code can be initialized by the operations on the Setup screen. Method for Initializing the Flash Error Code Initializes the setting to the default setting. 1 Select OK with v on the control button, then press z. The message “

49、Initialize all settings Ready?” appears. 2 Select OK with v, then press z. The settings are reset to the default setting. Make sure that the power is not disconnected during resetting. Initialize OKSee the following procedure. CancelCancels the resetting. DSC-W5/W7/W15/W17 2-12-2 The following flow chart shows the disassembly procedure. 2-1. DISASSEMBLY 2. DISASSEMBLY Note: High-voltage cautions Discharging the Capacitor Short-circuit between t