Drake_R-8B_user_1997.pdf

《Drake_R-8B_user_1997.pdf》由会员分享，可在线阅读，更多相关《Drake_R-8B_user_1997.pdf（44页珍藏版）》请在收音机爱好者资料库上搜索。

1、BW? AUTO? 6.0 MODE? AM SYNC ? A-B ? TIME? MEM? VFO A = B? A = B PRE ATTN? ANT 1 2 VHF? ? ? AGC S F? NOTCH NB N W? NAME ?TIMER? STEP CLK/FREQ? LOCK TUNESCAN NOTCH TONE SCAN MEM 6.04.0 AM/? SYNC FM 2.31.8LSBUSB 0.5AUTOCWRTTY BANDWIDTHMODE LIST? 2 A - B? 3 SEEK? 4 TIME? 5 CARR? 6 CLK? 7 LAMP? 8 BEEP? 9

2、 F DEL? 0 V M M V SQUELCH PASSBAND? OFFSET VOL RF MIN 0? - + R8B Communications Receiver 1 3 5 7 9 20 40 60 S UNITS DECIBLES SIGNAL M/KHz MEM? 1 CLR kHz Copyright 1997 R. L. Drake Company P/N: 3851305A-9-1997 Printed in the U. S. A. is a registered trademark of the R. L. Drake Company Owners Manual

3、R8B Communications Receiver Date: October 16, 1995 Signature _ Ref. No. 953427 Name: G. Raithel Dipl.-Ing. Signature _ Date: July 01, 1997 Name: Ronald E. Wysong_ (Stamp) Declaration of Conformity We, Manufacturer/Importer (Full address) R. L. Drake Company 230 Industrial Drive Franklin, Ohio 45005

4、United States of America declare that the product (Description of the apparatus, system, installation to which it refers) R8B Communications Receiver 1294 is in conformity with (reference to the specifications under which conformity is declared) in accordance with 89/336 EEC-EMC Directive EN 55011 E

5、N 55013 EN 55014 EN 55015 EN 55020 EN 55022 DIN V VDE 0855 part 10 part 12 CE marking EN 60065 Cabled distribution systems; Equipment for receiving and/or distribution from sound and television signals Limits and methods of measurement of radio disturbance characteristics of industrial, scientific a

6、nd medical (ISM) high frequency equipment Limits and methods of measurement of radio disturbance characteristics of broadcast receivers and associated equipment Limits and methods of measurement of radio disturbance characteristics of household electrical appliances, portable tools and similar elect

7、rical apparatus Limits and methods of measurement of radio disturbance characteristics of flourescent lamps and luminaries immunity from radio interference of broadcast receivers and associated equipment Limits and methods of measurement of radio disturbance characteristics of information technology

8、 equipment Disturbances in supply systems caused by household appliances and similar electrical equipment Harmonics Disturbances in supply systems caused by household appliances and similar electrical equipment Voltage fluctuations Generic emission standard Generic immunity standard EN 61000-3-2* EN

9、 61000-3-3* EN 50081-1 EN 50082-1 prEN 55024-2 prEN 55024-3 pr EN 55024-4 prENV 50142 ENV 50141 Electrostatic discharge requirements ESD (IEC 801-2) Radiated, radio frequency electromagnetic field (IEC 801-3) Electrical fast transient requirements Burst (IEC 801-4) Surge immunity requirements (IEC 8

10、01-5) Immunity to conducted disturbances induced by radio frequency fields above 9kHz (IEC 801-6) * Replacement of EN60555-2/-3 Safety requirements for mains operated electronic and related apparatus for household and similar general use The manufacturer also declares the conformity of above mention

11、ed product with the actual required safety standards in accordance with LVD 73/23 EEC. (EC conformity marking) Manufacturer/Importer EN 60950Safety for information technology equipment including electrical business equipment EMC Tested by electronic GmbH TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK,

12、 DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. DO NOT OPEN THE CABINET, REFER SERVICING TO QUALIFIED PERSONNEL ONLY. TO PREVENT ELECTRIC SHOCK, DO NOT USE THE THREE WIRE CORD WITH AN EXTENSION CORD RECEPTACLE OR OTHER OUTLET UNLESS THE BLADES CAN BE FULLY INSERTED TO PREVENT BLADE EXPOSURE. POUR

13、 PREVENIR LES CHOCS ELECTRIQUES, NE PAS UTILISER CETTE FICHE POLARISEE AVEC UN PROLONGATEUR, UNE PRISE DE COURANT OU UNE AUTRE SORTIE DE COUR- ANT, SAUF SI LES LAMES PEUVENT ETRE INSEREES A FOND SANS EN LAISSER AUCUNE PARTIE A DECOUVERT. WARNING: CAUTION: ATTENTION: An appliance and cart combination

14、 should be moved with care. Quick stops, excessive force and uneven surfaces may cause the appliance and cart combina- tion to overturn. The lightning flash with arrow head symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated dangerous voltage within t

15、he products enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. The exclamation point within an equilateral triangle is intended to alert the user to the presence of impor- tant operating and maintenance (servicing) instruc- tions in the literature accomp

16、anying the appliance. WARNING! WARNING: TO PREVENT FIRE OR ELECTRICAL SHOCK DO NOT EXPOSE TO RAIN OR MOISTURE RISK OF ELECTRIC SHOCK DO NOT OPEN WARNING: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK) NO USER-SERVICABLE PARTS INSIDE REFER SERVICING TO QUALIFIED PERSONNEL 1. Read

17、 InstructionsAll the safety and operating instructions should be read before the appliance is operated. 2. Retain InstructionsThe safety and operating instructions should be retained for future reference. 3. Heed WarningsAll warnings on the appliance should be adhered to. 4. Follow InstructionsAll o

18、perating and use instructions should be followed. 5. CleaningUnplug this appliance from the wall outlet before cleaning. Do not use liquid cleaners or aerosol cleansers. Use a damp cloth for cleaning. 6. Do Not Use Attachmentsnot recommended by the manufacturer or they may cause hazards. 7. Water an

19、d MoistureDo not use this product near waterfor example, near a bathtub, wash bowl, kitchen sink, laundry tub, in a wet basement, or near a swimming pooland the like. 8. AccessoriesDo not place this product on an unstable cart, stand, tripod, bracket, or table. The product may fall, causing serious

20、injury to a child or adult, and serious damage to the appliance. 9. VentilationThis product should never be placed near or over a radiator or heat register. This product should not be placed in a built-in installation such as a bookcase or rack unless proper ventilation is provided or the manufactur

21、ers instructions have been adhered to. Any slots or openings in the cabinet are provided for ventilation. To ensure reliable operation of the video product and to protect it from overheating, these openings must not be blocked or covered. The openings should never be blocked by placing the product o

22、n a bed, sofa, rug, or other similar surface. 10. Grounding or PolarizationThis product is equipped with a 3- wire line cord receptacle. It is intended for use with a 3-wire properly grounded power socket. Do not defeat the safety purpose of the supplied line cord and plug. 10A. Mise la terre ou Pol

23、arisationCet appareil est quip avec un cordon dalimentation trois fils. Il est a brancher sur une prise ayant un connecteur a la terre. Assurez-vous que la connection a la terre ne manque pas. 11. Power SourcesThis product should be operated only from the type of power source indicated on the markin

24、g label. If you are not sure of the type of power supplied to your home, consult your appliance dealer or local power company. 12. Power-cord ProtectionPower-supply cords should be routed so they are not likely to be walked on or pinched by items placed upon or against them. Pay particular attention

25、 to cords at plugs, convenience receptacles, and the point where they exit from the appliance. 13. LightningFor added protection for this product during a lightning storm, or when it is left unattended and unused for long periods of time, unplug it from the wall outlet. 14. Power LinesAn outside ant

26、enna system should not be located in the vicinity of overhead power lines, other electric light or power circuits, where it can fall into such power lines or circuits. When installing an outside antenna system, extreme care should be taken to keep from touching such power lines or circuits as contac

27、t with them may be fatal. Important Safeguards i ii Important Safeguards, continued INSTALL WIRING ACCORDING TO THE CANADIAN ELECTRICAL CODE EFFECTUER LE CABLAGE CONFORMEMENT AU CODE CANADIEN DE L ELECTRICITE 15. OverloadingDo not overload wall outlets and extension cords as this can result in a ris

28、k of fire or electric shock. 16. Object and Liquid EntryNever push objects of any kind into this product through openings as they may touch dangerous voltage points or short-out parts that could result in a fire or electric shock. Never spill liquid of any kind on the product. 17. ServicingDo not at

29、tempt to service this product yourself as opening or removing covers may expose you to dangerous voltage or other hazards. Refer all servicing to qualified service personnel. 18. Damage Requiring ServiceUnplug this product from the wall outlet and refer servicing to qualified service personnel under

30、 the following conditions: a. When the power-supply cord or plug is damaged. b. If liquid has been spilled, or objects have fallen into the product. c. If the product has been exposed to rain or water. d. If the product does not operate normally by following the operating instructions. Adjust only t

31、hose controls that are covered by the operating instructions. An improper adjustment may result in damage and will often require extensive work by a qualified technician to restore the product to its normal operation. e. If the product has been dropped or the cabinet has been damaged. f. When the pr

32、oduct exhibits a distinct change in performancethis indicates a need for service. 19. Replacement PartsWhen replacement parts are required, be sure the service technician has used replacement parts specified by the manufacturer or have the same characteristics as the original parts. Unauthorized sub

33、stitutes may result in fire, electric shock or other hazards. 20. Safety CheckUpon completion of any service or repairs to this product, ask the service technician to perform safety checks to determine that the product is in proper operating condition. 21. Outdoor Antenna GroundingBefore attempting

34、to install this prod- uct, be sure the antenna or cable system is grounded so as to provide some protection against voltage surges and built-up static charges. a. Use No.10 AWG (5.3mm2) copper, No.8 AWG (8.4mm2) aluminum, No.17 AWG (1.0mm2) copper-clad steel or bronze wire or larger, as ground wire.

35、 b. Secure antenna lead-in and ground wires to house with stand-off insulators spaced from 4 feet (1.22m) to 6 feet (1.83m) apart. c. Mount antenna discharge unit as close as possible to where lead-in enters house. d. A driven rod may be used as the grounding electrode where other types of electrode

36、 systems do not exist. Refer to the National Electrical Code, ANSI/NFPA 70-1990for information. e. Use jumper wire not smaller than No.6 AWG 13.3mm2) copper or equivalent, when a separate antenna grounding electrode is used. POWER SERVICE GROUNDING ELECTRODE SYSTEM (NEC ART 250, PART H) GROUND CLAMP

37、S GROUNDING CONDUCTORS (NEC SECTION 810-21) ANTENNA DISCHARGE UNIT (NEC SECTION 810-20) ANTENNA LEAD IN WIRE ELECTRIC SERVICE EQUIPMENT GROUND CLAMP NEC - NATIONAL ELECTRIC CODE EXAMPLE OF ANTENNA GROUNDING Table of Contents iii Thank you for purchasing a Drake R8B Communications Receiver. This rece

38、iver has been designed and manu- factured to high quality standards, and will provide reliable operation for many years. Please carefully read the Owners Manual in order to take advantage of the many interesting features that will provide enjoyable listening to radio broadcasts around the world. 17

39、18 18 18 18 18 19 19 20 20 21 21 22 22 22 22 22 23 25 26 26 26 26 26 26 26 27 31 32 33 35 35 36 37 i iii 1 1 2 3 4 5 6 8 10 11 12 12 12 12 12 12 13 13 14 14 14 14 15 15 15 15 15 16 16 Memory Functions Memory Channel Programming Recalling A Memory Channel Deleting A Memory Channel Erase All Memory Ch

40、annels Locking A Memory Channel Scan Functions Scan Memory Scan Memory List Block Locking A Memory Channel Scan A - B Important Notes About Scanning Clock and Timer Functions Time Display Setting The 24 Hour Clocks Timer Operation Setting Timer On/Off Times Enabling/Disabling Timer Operation Timer C

41、onnector Interface Special Use Features and Functions Function Line Invert Setting Power Off (On) Lamp Brightness 10 kHz/9 kHz Scan Delete All Memory Locations Power On Button Functions Held Button Functions RS232C Interface Glossary of Terms Suggested References Quick Reference Guide Troubleshootin

42、g Special Display Messages Service Warranty Warning: The R8B Communications Receiver complies with FCC rule Part 15. Any changes or modifications to the receiver, without expressed approval of the R. L. Drake Company, could cause the receiver to violate the FCC Compliance rules. Important Safeguards

43、 Table of Contents Introduction General Description Specifications / Accessories Safety Voltage Selection Installation Unpacking Location Fixed Installation Mobile Installation Antenna Requirements Installation Diagram Front Panel Description Front Panel Display Rear Panel Description Mute Operation

44、 of the Receiver Getting Started General Operating Information Microprocessor Reset Beep Tones Getting Started Frequency Step Selection Dual VFOs Direct Frequency Entry Front Panel Lock Passband Offset Operation Notch Operation AM Synchronous Detector RF Function (Attenuator/Preamplifier) Noise Blan

45、ker CW Operation RTTY Operation SSB Operation FM Operation Gain and AGC Operation iv This page left intentionally blank. BW? AUTO? 6.0 4.0? 2.3 1.8? 0.5 MODE? AM SYNC? LSB USB? CW FM? RTTY SCAN MEM? LIST? A-B SEEK? TIME? CARR MEM? TUNE VFO A = B? A = B PRE ATTN? ANT 1 2 VHF? AGC S F? NOTCH NB N W? N

46、AME ? 12 ON OFF? TIMER? STEP CLK/FREQ? LOCK F TUNE SCAN NOTCH TONE SCAN MEM 6.04.0 AM/? SYNC FM 2.31.8LSBUSB 0.5AUTOCWRTTY BANDWIDTHMODE LIST? 2 A - B? 3 SEEK? 4 TIME? 5 CARR? 6 CLK? 7 LAMP? 8 BEEP? 9 F DEL? 0 V M M V SQUELCH PASSBAND? OFFSET VOL RF MIN 0? - + R8B Communications Receiver 1 3 5 7 9 2

47、0 40 60 S UNITS DECIBLES SIGNAL M/KHz MEM? 1 CLR kHz MHz A PASSBAND OFFSET control also aids in reducing or eliminating interfering signals by electronically shifting the receivers IF frequencies without disturbing the operating frequency. This action allows the operator to electroni- cally move int

48、erfering signals out of the receivers pass- band thus utilizing the high degree of selectivity provided by the High-Q, 8-pole IF filter. Other built-in reception aids include selectable AGC speed, dual antenna inputs, noise blanker(NB), RF pream- plifier for enhancing weak signals, RF attenuator for further improvement of strong signal handling capabilities, ad- justable RF gain, NOTCH, TONE and SQUELCH controls. Two independent, real time clocks provide a local and alternative time selection. Also provided is a two event t