IC-746_serv.pdf

《IC-746_serv.pdf》由会员分享，可在线阅读，更多相关《IC-746_serv.pdf（129页珍藏版）》请在收音机爱好者资料库上搜索。

1、 Page 1 Icom America, Inc. 2380 116th Ave NE Bellevue, WA 98004 425.454.7619 746 and IC-PW1 Control Software Interconnection 1. Make sure the CT-17 is powered up. Connect the CT-17 output 1 to the 746, and output 2 to the PW1. 2. Power up the 746 and set up the CI-V communication per the PW1 manual.

2、 The CI-V set up will vary between the early and the latest PW1 units. 3. Power on the 746 and the PW1. The PW1 should now automatically select the band to which the 746 is set. 4. Now start the software, and set the software com port setting to the port you have the CT-17 connected to. The software should recognize the 746 and show the exact frequency on the computer screen to which the 746 is tuned. 5. As you change bands on either the 746 or the software, the PW1 will follow that band change. If you change bands on the software, both the 746 and the PW1 will follow that band change. +