IC-7610_user_basic.pdf

《IC-7610_user_basic.pdf》由会员分享，可在线阅读，更多相关《IC-7610_user_basic.pdf（80页珍藏版）》请在收音机爱好者资料库上搜索。

1、BASIC MANUAL i7610 HF/50 MHz TRANSCEIVER i Thank you for choosing this Icom product. The IC-7610 HF/50 MHz TRANSCEIVER is designed and built with Icoms state of the art technology and craftsmanship. With proper care, this product should provide you with years of trouble-free operation. We appreciate

2、 you making the IC-7610 your transceiver of choice, and hope you agree with Icoms philosophy of “technology fjrst.” Many hours of research and development went into the design of your IC-7610. FEATURES RF Direct Sampling System The IC-7610 employs an RF direct sampling system. RF signals are directl

3、y converted to digital data and processed in the FPGA. This system is a leading technology marking an epoch in amateur radio. 2 identical receivers The IC-7610 has 2 independent receiver circuits for the Main and Sub bands. A built-in DIGI-SEL unit Both the Main and Sub receivers have built-in DIGI-

4、SEL (digital preselector) units. These reject interfering signals. Real-Time Spectrum Scope Displays the Main and Sub band conditions. It provides class-leading performance in resolution, sweep speed and provides a 100 dB dynamic range. A built-in automatic antenna tuner Multi-function control for e

5、asy settings Extra large 7 inch touch screen color display External monitor connection with a DVI-D port BNC type RX IN/OUT connectors Class Leading RMDR and Phase Noise Characteristics IP remote control capability with the optional RS-BA1 ip remote control software Remote encoder capability with th

6、e optional RC-28 remote encoder Dualwatch operation SUPPLIED ACCESSORIES L Different types of accessories may be supplied, or may not be supplied depending on the transceiver version. IMPORTANT READ ALL INSTRUCTIONS carefully completely before using the transceiver. SAVE THIS INSTRUCTION MANUAL This

7、 instruction manual contains basic operating instructions for the IC- 7610. For the advanced operating instructions, see the Advanced Manual on the supplied CD. This product includes RTOS “RTX” software, and is licensed according to the software license. This product includes “zlib” open source soft

8、ware, and is licensed according to the open source software license. This product includes “libpng” open source software, and is licensed according to the open source software license. Refer to the Text fjles in the License folder of included CD for information on the open source software being used

9、 by this product. Icom is not responsible for the destruction, damage to, or performance of any Icom or non-Icom equipment, if the malfunction is because of: Force majeure, including, but not limited to, fjres, earthquakes, storms, fmoods, lightning, or other natural disasters, disturbances, riots,

10、war, or radioactive contamination. The use of Icom transceivers with any equipment that is not manufactured or approved by Icom. Hand microphone (HM-219) DC power cable (3 m: 9.8 ft) Spare fuse (30 A) Spare fuse (5 A) CW key plug (6.35 mm: 1/4 Stereo) CD ii This equipment has been tested and found t

11、o comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not instal

12、led and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be det

13、ermined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit d

14、ifferent from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. WARNING: MODIFICATION OF THIS DEVICE TO RECEIVE CELLULAR RADIOTELEPHONE SERVICE SIGNALS IS PROHIBITED UNDER FCC RULES AND FEDERAL LAW. CAUTION: Changes or modifjcations to this d

15、evice, not expressly approved by Icom Inc., could void your authority to operate this device under FCC regulations. FCC INFORMATIONTRADEMARKS Icom, Icom Inc. and the Icom logo are registered trademarks of Icom Incorporated (Japan) in Japan, the United States, the United Kingdom, Germany, France, Spa

16、in, Russia, Australia, New Zealand and/or other countries. Microsoft, Windows and Windows Vista are registered trademarks of Microsoft Corporation in the United States and/or other countries. Adobe, Acrobat, and Reader are either registered trademarks or trademarks of Adobe Systems Incorporated in t

17、he United States and/or other countries. All other products or brands are registered trademarks or trademarks of their respective holders. WORDDEFINITION R DANGER! Personal death, serious injury or an explosion may occur. R WARNING! Personal injury, fi re hazard or electric shock may occur. CAUTIONE

18、quipment damage may occur. NOTE Recommended for optimum use. No risk of personal injury, fi re or electric shock. EXPLICIT DEFINITIONS DISPOSAL The crossed-out wheeled-bin symbol on your product, literature, or packaging reminds you that in the European Union, all electrical and electronic products,

19、 batteries, and accumulators (rechargeable batteries) must be taken to designated collection locations at the end of their working life. Do not dispose of these products as unsorted municipal waste. Dispose of them according to the laws in your area. ABOUT CE AND DOC Hereby, Icom Inc. declares that

20、the versions of IC-7610 which have the “CE” symbol on the product, comply with the essential requirements of the Radio Equipment Directive, 2014/53/EU, and the restriction of the use of certain hazardous substances in electrical and electronic equipment Directive, 2011/65/EU. The full text of the EU

21、 declaration of conformity is available at the following internet address: http:/www.icom.co.jp/world/support ABOUT SPURIOUS SIGNALS Spurious signals may be received near the following frequencies. These are made in the internal circuit and does not indicate a transceiver malfunction: 28.671 MHz 50.

22、516 MHz 51.881 MHz 53.246 MHz 53.760 MHz iii D Touch operation In the Full manual or Basic manual, the touch operation is described as shown below. Touch If the display is touched briefmy, one short beep sounds. Touch for 1 second If the display is touched for 1 second, one short and one long beep s

23、ound. D Touch screen precautions The touch screen may not properly work when the LCD protection fjlm or sheet is attached. Touching the screen with your fjnger nails, sharp topped object and so on, or touching the screen hard may damage it. Tablet PCs operations such as fmick, pinch in and pinch out

24、 cannot be performed on this touch screen. D Touch screen maintenance If the touch screen becomes dusty or dirty, wipe it clean with a soft, dry cloth. When you wipe the touch screen, be careful not to push it too hard or scratch it with your fjnger nails. Otherwise you may damage the screen. The fo

25、llowing items are included on the CD. Basic manual (English) Instructions for basic operations, the same as this manual. Advanced manual (English) Instructions for advanced operations in English. Basic manual (Multi-language) Instructions for basic operations in multiple languages. Schematic diagram

26、 Includes the schematic and block diagrams. HAM radio Terms (English) A glossary of HAM radio terms in English. Adobe Reader Installer Installer for Adobe Reader. A PC with the following Operating System is required. Microsoft Windows 10 Microsoft Windows 8.1 Microsoft Windows 7 To read the manuals

27、or Schematic diagram, Adobe Acrobat Reader is required. If you have not installed it, please install the Adobe Acrobat Reader on the CD or download it from Adobe Systems Incorporateds website. Starting the CD 1. Insert the CD into the CD drive. 2. Double click “Menu.exe” on the CD. Depending on the

28、PC setting, the menu screen shown below is automatically displayed. 3. Click the desired button to open the file. L To close the Menu screen, click Quit. ABOUT THE TOUCH SCREEN ABOUT THE SUPPLIED CD L Different types of menu screen may be displayed, depending on the transceiver version. Closes the M

29、enu screen Installs Adobe Acrobat Reader Opens the multi-language Basic manual Opens the Schematic diagram Opens the Glossary Opens the English Basic manual (this manual) Opens the English Advanced manual iv ABOUT THE CONSTRUCTION OF THE MANUAL There are two different types of manuals for this trans

30、ceiver, the Basic manual (this manual) and the Advanced manual. D Basic manual (This manual) Instructions for the basic operations, precautions, installations and connections. D Advanced manual (PDF type) Instructions for the advanced operations, such as listed below and more. L The Advanced manual

31、is on the CD that is supplied with the transceiver, or can be downloaded from the Icom website. http:/www.icom.co.jp/world/support User Band Edge IP Plus function Main/Sub Band Tracking function Adjusting the Drive Gain level VOX function TX function Operating CW Operating RTTY (FSK) and PSK Data mo

32、de (AFSK) operation Scope operation Voice Recorder functions Voice TX Memory operation Using an SD card and USB fmash drive Memory operation Scan Set mode Clock and Timers Updating the fjrmware Replacing fuse Cleaning And more. v ABOUT THE INSTRUCTIONS Instruction example MENU SET Time Set Date/Time

33、 Detailed instruction 1. Push MENU. Opens the MENU screen. 2. Touch SET. Opens the SET screen. 3. Touch “Time Set.” Opens the TIME SET screen. 4. Touch “Date/Time.” Opens the DATE/TIME screen. 5. Touch “Date.” Opens the date editing screen. 6. Touch + and - to set the date. The Basic and Advanced ma

34、nuals are described in the following manner. “ ” (Quotation marks): Used to indicate icons, setting items, and screen titles displayed on the screen. The screen titles are also indicated in uppercase letters. (Example: FUNCTION screen) (brackets): Used to indicate keys. Routes in the set modes and s

35、etting screens Routes in the set mode, setting screen and the setting items are described in the following manner. 7. Touch SET to set the date. LTouch to cancel. Returns to the previous screen. D Setting the current date 1. Open the DATE/TIME screen. MENU SET Time Set Date/Time 2. Touch “Date/Time.

36、” 3. Touch “Date.” Opens the date editing screen. MENU vi TABLE OF CONTENTS IMPORTANT . i FEATURES . i SUPPLIED ACCESSORIES . i FCC INFORMATION .ii TRADEMARKS .ii EXPLICIT DEFINITIONS .ii DISPOSAL .ii ABOUT CE AND DOC .ii ABOUT THE TOUCH SCREEN .iii ABOUT THE SUPPLIED CD .iii ABOUT THE CONSTRUCTION

37、OF THE MANUAL .iv ABOUT THE INSTRUCTIONS . v PRECAUTIONS .viii 1. PANEL DESCRIPTION .1-1 Front panel .1-1 Rear panel .1-3 Touch screen display .1-4 D MENU screen .1-6 D Multi-function menus .1-6 D Multi-function key group .1-7 D QUICK MENU .1-7 Keyboard entering and editing .1-8 D Keyboard types .1-

38、8 D Entering and editing .1-8 D Entering and editing example .1-9 2. INSTALLATION AND CONNECTIONS .2-1 Using the desktop stands .2-1 Selecting a location .2-1 Heat dissipation .2-1 Grounding .2-1 Connecting an external DC power supply .2-1 Connecting the antenna tuner .2-2 Connecting a Transverter .

39、2-2 Linear amplifjer connections .2-3 D Connecting the IC-PW1/IC-PW1EURO .2-3 D Connecting a non-Icom linear amplifjer .2-3 3. BASIC OPERATION .3-1 When fjrst applying power .3-1 Turning power ON or OFF .3-1 Adjusting the volume level .3-1 Selecting the VFO and Memory modes .3-1 Selecting the Main a

40、nd Sub bands .3-2 D Switching the Main band and Sub band .3-2 Dualwatch operation .3-2 D Using the Dualwatch operation .3-2 Selecting the operating band .3-3 D Selecting the operating band on the keypad .3-3 D Selecting the operating band on the screen .3-3 Selecting the operating mode .3-3 Setting

41、the frequency .3-4 D Using the Main Dial .3-4 D Setting the Tuning Step function .3-4 D Changing the Tuning Step .3-4 D Using the 1 Hz step Fine Tuning function .3-4 D Using the 1/4 Tuning function .3-5 D Using the Auto Tuning Step function .3-5 D Directly entering a frequency .3-5 Dial Lock functio

42、n .3-6 RF gain and SQL level .3-7 Meter display .3-7 D Selecting the Meter readout .3-7 D About the Multi-function meter .3-7 D Displaying the Multi-function meter .3-8 Adjusting the transmit output power .3-8 D Adjusting the transmit output power .3-8 Adjusting the microphone gain .3-9 Basic transmission .3-9 4. RECEIVING AND TRANSMITTING .4-1 Preamplifjers .4-1 Attenuator .